Search:

Any new recommendations? I'd rather not install an external bec on my E Revo 2.0. I currently run two 35kg (32kg on 6v) DSservos but they don't seem as strong as advertised. I am about to try 2x...

Cool! Thanks. ��

Old thread but my E Revo 2.0 pops the plastic shock caps. ��

Thanks for the HELPFUL answers. I have a Thunder Tiger ST4 G3 with a Savöx SW-1210SG and Castle 10A bec at 7.2v. Works great.

Kids were out crawling today and I saw that down really steep hills, the kind that are hard to walk, the cars rolled slowly down. Stock gears.

My two kids have a Sport each. One works flawlessly but the other have serious binding issues. It binds occasionally but more often not. When it binds it looses connection when it is turned off and...

Have anybody tried to put a small battery in the lower part of the battery tray? If so, any recommendations? Runtimes?

I read that the Sport gearing is somewhere in between high and low on the TRX-4. What pinion do I need to get the same ratio on the Sport as on the TRX-4? Or is a different gearing recommended? Will...

Use the spool from the Sport in the diffs.

There is also a kit with locked spools to replace the diffs. There is at least one video on YouTube about this.

Are you sure you're in the right mode? It sound like you're in trail mode with drag brakes. Have you tried to reset the mode?

Any of the escs recommended here with enough power to support a high torque servo in the 30-35kg range?

I realize this is an old thread but just thought I should add some info. The Savöx 1210 pulls 6A max @6v. Two 1210s would then pull 12A, well within the 20A max if the ESCs BEC. 2x20kg should suffice...

TSM is turned all the way down. I can't find a way to disable it other than this. TSM caused wobbling when over 50%.

They are properly set. The weird thing is it that it doesn't happen all the time.

My E Revo has two of these servoes. I am having intermittent issues. Quite often they seem to not be strong enough to return the wheels to center when standing still and driving slowly even though...

I also installed 20/46 gearing after shredding the plastic spur gear. Got excessive cogging of temperature warning. Installed the 15t pinion and things improved.

Thanks. The issue didn't appear until I replaced the spur gear. It worked just fine for a couple of batteries after the servo replacement.

I have one other rc but of a different brand. I will see...

Shredded the spur gear on Saturday. Installed 20/46 steel gears yesterday. 70mph is insane with this car on a 1.5 lane blacktop. To bad the car behaves good for only about a minute after power on...

My E Revo has Savöx SW-0231MG servos since the stock gave in. I also have 20/46 gearing. The car has performed flawlessly until the servo failure. New servos put the car back into service with no...

My car does both. It stutters on the throttle and I have steering issues. I will start a new thread.

Any news on this? My E Revo stutters too. The servos often won't recenter when standing still. They stutter and try to center but doesn't quite succeed. With car lying on its back I gave a little...

My E Revo 2.0 holds up just fine with 6s. No drivetrain issues. I have broken two center drive shafts due to gravel getting into the tunnel, gnawing a groove into them and finally snapping but...

Any new recommendations as to servo replacement on the E Revo 2.0? I have another truck with the Savöx SW1210SG and external bec @7.4v and it works great but I don't want to install external bec on...

I had the same issue. It got sorted out with a firmware update of the esc.