Search:

https://www.arrmaforum.com/threads/adjustable-ramp-design.13509/

If you go to discount tire they will tell you to buy at least the pair :cool:

If you are not doing any sort of racing, my vote is the 4068
The larger can motors provide some nice torque, but like you mentioned weight is a concern.

+1 on Hota chargers.

Look at wattage output and ignore amps when looking at specs.

I run an 2S 6.6V Li-Fe Receiver Battery. Works out to be very similar to running a BEC circuit.

It is hard to see but generally the tire is made of several doughnuts laminated together and smoothed to appear as one.
The gluing process is not easy from what I hear. At the low cost of 1/10...

I had a TP Power 4040CM in mine with the Castle MMX esc, and hit 70+mph speeds on 2s. Never got up the nerve to try 4s on it. (what the motor was rated for)

Mod 1 gears are done like you saw on...

If you will occasionally take it out on the track the Slash 4x4 is your best choice of the listed options.
There are plenty of race track specific parts made for the Slash 4x4.

127mm diameter tire will fix that. (around 55mph)
71mm is the width

After accounting for some tire ballooning (since the tires are not belted) you can estimate a diameter of 140mm at 60mph...

Those should both work well. I had the Toyota GT1 on my Slash 4x4. Most of the speed guys run the Jag body...
I say keep one for the shelf and one to drive!

They rarely last more than 2 outings...

I ran these same parts on the 4Tec 2.0 (smaller version made for it)
The upper braces majorly removed any slop front to rear in the suspension.

This is a good mod for speed to keep the toe and...

It is certainly a grey area of which bodies fit the Slash well without some crazy modifications. Which body did you order?

My experiences with the Delta Plastics bodies was that they work, but...

I used the Traxxas Rally front bumper and Pro-Line Racing 608700 Extended Front and Rear Body Mounts for Slash 4x4
(it looks like that Rally bumper is harder to find now days)
If my memory is...

I would go locked rear, and thick fluid on the front. (this way it will still steer for the u-turns at the end of each run)
The differentials in RC cars are what is called an open differential. ...

Glad it didn't have too much damage after all of that.

Not sure if you have opened up the diffs yet and put thicker fluid in but that really helps. (something like 500k or 1 million cst)

Also...

Look through his videos on YouTube. He has done a few FPV runs

Nice Run! You may want to take some extra precaution taking your kid with you. Imagine the car loosing control (like it did on the one pass) You wont have enough time to protect the child. I have...

(I realize this is a 2016 thread)

I had this same experience with the fan. My issue with the MMX is the plug for the sensored connection and power switch can pop out easily (powers off the ESC). ...

Grave digger body with some LEDs would be pretty sweet on an XMaxx

My son has the Parma GD body on his Slash MT.

The skyRc corner weight system isn't really that expensive.

RCJuice had a sale or coupon and I got the setup for $80.00

Harder rear springs (or add the spacers) and make sure it has some rake (rear sits higher than the front)
under acceleration the rear is squatting and the front lifts. Air goes under the front =...

If you own them try getting used to the car on 3s or 4s before going up to 6s. Get everything dialed in and stable first before going fast.

You can purchase anti-spark connectors. Id look for...

I had MIP X-Duty axles with MIP 17mm conversion. It worked fine but kinda pricy like all MIP products...

Those tires and body are at their limits already.
Expect lots of blow overs going faster.

https://www.amazon.com/Traxxas-Blue-Anodized-Aluminum-Turnbuckles-Camber/dp/B000LTY3P8/ref=sr_1_21_sspa?keywords=slash+4x4+camber+arm&qid=1567090622&s=gateway&sr=8-21-spons&psc=1&smid=AAPKX66PNH2C7&sp...