Search:

Type: Posts; User: 222

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    21
    Views
    935

    Best ESC upgrade from VXL-3s?

    Itís a Novak brushed crawler ESC. Here are a couple pics I found doing a quick search. Itís not available new any longer. I saw a couple of used ones. Itís appears to be an older brushed...
  2. Thread: Rc recommendation

    by 222
    Replies
    11
    Views
    153

    The slash 4x4 is one tough vehicle that is pretty...

    The slash 4x4 is one tough vehicle that is pretty easy to work on and can take a beating. Iíve jumped mine 30-40 feet and as high as 10-12 feet, and it just comes back for more. Also itís a good...
  3. Replies
    3
    Views
    96

    First it sounds as if your slipper clutch is...

    First it sounds as if your slipper clutch is loose. You need to turn the nut on the end of the slipper clutch in to tighten it.
    Second, you can loosen your pinion gear with an Allen wrench and...
  4. Thread: Servo help

    by 222
    Replies
    5
    Views
    74

    The 1230sg is plenty with 6v giving 500oz of...

    The 1230sg is plenty with 6v giving 500oz of torque, the 0231 may be a little underpowered with only 208oz of toque at 6v, you may want to upgrade it. The traxxas one is plenty as well. Anything...
  5. Replies
    9
    Views
    131

    Like said, if you have a local hobby shop, they...

    Like said, if you have a local hobby shop, they will most likely have the parts or can order them for you. If you donít have a hobby shop to go to, eBay is a good place to find parts.
  6. Thread: Light Kit

    by 222
    Replies
    18
    Views
    496

    I thought the light kits were ďgivenĒ with the...

    I thought the light kits were ďgivenĒ with the first shipments to hobby shops. Sounds like your hobby shop is trying to get more out of it then they actually paid. Not cool at all. I would have...
  7. Replies
    3
    Views
    95

    It all depends on what you need out of the...

    It all depends on what you need out of the transmitter. Need some more info as to what you need for Channels. 2 channel, 3 or even 4 or more channels. Futaba makes some darn good radios, as well...
  8. Replies
    7
    Views
    140

    Part #5441 Spring, shock (GTR) (4.4 rate black) ...

    Part #5441 Spring, shock (GTR) (4.4 rate black)

    Part #5442 Spring, shock (GTR) (4.9 rate silver) (std. front 120mm)

    Part #5443 Spring, shock (GTR) (5.4 rate pink)

    Part #5444 Spring, shock...
  9. Replies
    62
    Views
    1,787

    I would think the same. For the price you get a...

    I would think the same. For the price you get a lot more vehicle with the Erevo. Granted you need 2 batteries, but you do get a lot more vehicle for the money IMO. If the price was more toward...
  10. Replies
    4
    Views
    235

    New Teton or 1/16 e-revo?

    You can place the mini Erevo into training mode for your son. Itís cuts the speed in 1/2. With the brushed motor and set to training mode it should be perfect for him to learn on. You can also...
  11. Replies
    6
    Views
    261

    Gearing down would be a good idea if you plan on...

    Gearing down would be a good idea if you plan on getting larger tires. As for wheels/tires, look into the new belted Proline Trenchers. Good all around tire for bashing. Also not sure of the wheel...
  12. Replies
    1
    Views
    127

    Yes but watch the temps closely. Gear up a...

    Yes but watch the temps closely. Gear up a couple teeth on the pinion gear. I donít know what the stock gearing is for the rustler brushed version so youíll have to take a look at what pinion is...
  13. Replies
    5
    Views
    179

    An external BEC isnít a bad idea, Iíve been...

    An external BEC isnít a bad idea, Iíve been running one on my summit for years with dual savox servos for steering. Good thing about going this route is being able to bump the voltage up allowing...
  14. Replies
    5
    Views
    179

    The battery under load was probably lower voltage...

    The battery under load was probably lower voltage then what you have listed. As so, it may have caused things to get ďweirdĒ, as you stated. The low voltage cutoff on these ESCís are normally set...
  15. Replies
    204
    Views
    181,567

    Sticky: You may want to get a full set of the same tires....

    You may want to get a full set of the same tires. If the tires are different sizes it may cause issues. Truck looks nice. Also keep an eye on the temps of the motor and ESC. Have fun with it!
  16. Thread: Melted spur gear

    by 222
    Replies
    3
    Views
    143

    I would check the mesh for sure. With notebook...

    I would check the mesh for sure. With notebook paper you just want to very lightly press the pinion onto the spur gear. You should be able to pull the paper out and not rip it doing so. A lot of...
  17. Thread: Size Comparison

    by 222
    Replies
    20
    Views
    915

    Size Comparison

    Appears to be an Armma vehicle. Kraton possibly as said above. Itís definitely smaller then the Erevo 2.0, the maxx that is.
  18. Tighten the slipper clutch. If you donít know...

    Tighten the slipper clutch. If you donít know what the slipper clutch is, maybe time to start learning what you have before you run it anymore. Not trying to be rude, but knowing how and what parts...
  19. Replies
    5
    Views
    3,052

    A small rubber band would work as said in above...

    A small rubber band would work as said in above post. Hit up the local Walgreens or Walmart or whatever store you have near you, and look for small rubber bands either for braces or in the hair...
  20. Replies
    22
    Views
    293

    Not much if any as the voltage when charges are...

    Not much if any as the voltage when charges are about the same. As you have seen the only real difference in a 2s lipo versus the stock NIMH is longer runtimes and less voltage sag. Like said put...
  21. Replies
    7
    Views
    199

    Sounds like your overheated the motor and now...

    Sounds like your overheated the motor and now itís not working correctly. At 200 degrees, it most likely damaged it. And being itís an older 2 pole motor, I doubt traxxas will just replace it for...
  22. Replies
    21
    Views
    935

    I would get an external BEC, and set it to...

    I would get an external BEC, and set it to whatever voltage you like. Bypass the receiver and you an then run it at 8.4vdc with no issue. If you are wanting a better motor/ESC, look into the Castle...
  23. Replies
    4
    Views
    306

    Good deal!! Glad you got it sorted.

    Good deal!! Glad you got it sorted.
  24. Well your iPhone is several years old. Itís not...

    Well your iPhone is several years old. Itís not a traxxas issue here. The app works as it should. Your version of iOS is years old and that isnít traxxasí fault man. You canít expect traxxas to...
  25. Replies
    10
    Views
    408

    Castle creations MMX and 2200kv sensored motor....

    Castle creations MMX and 2200kv sensored motor.
    I have seen quite a few using this setup with the summit. Seems to perform quite well. Should be plenty for your application.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4