Search:

The aluminium cup will help a fair bit.if you can adjust the punch
That will help as well.
The brushless spin up so fast and there is enough play in the driveline
That it really shock loads the...

Tactical to crapticalhttps://uploads.tapatalk-cdn.com/20191128/04a0791878f8deaf2c41d9fe08af22ca.jpg

Sent from my SM-G930W8 using Tapatalk

I 2nd this post.can always add stuff later.

Sent from my SM-G930W8 using Tapatalk

I run xt 60 connecters on everything except my traxxas lipos.
So I use a homemade adapter plug to run those packs
A older style traxxas plug and a xt 60 joined with as short of wires as i could...

Check out holmes hobbies web site
Very good information as well as great motors.Its good to know what you are looking for in a motor for your application.

Sent from my SM-G973W using Tapatalk

Still will want to run throttle curve
3800 is a pretty fast motor for this rig.
So you will want the power to roll on slower.you can detuned it a bit with punch control.

Sent from my SM-G973W...

That is good news.
There are aftermarket foams that can be used that are tunable to the weight of the rig heavier rigs need stiffer foams lighter rigs need softer foams.
Once yours break in a bit...

Make sure your foams are centered and even.
Check to see if the beadlocs are tightened down evenly.
Make sure hub is fully seated on the hex.
If that's not the issue we will continue down the...

I run xt 60 on everything.
I have a couple traxxas packs and a ez peak live 12amp charger I got in a deal.
So I made a adapter to charge my xt packs on it and one to run the packs.
3s brushless...

I think because of the portals they had to reverse the rotation on the rear.so needed to have the ring gear on the other side.

Sent from my SM-G973W using Tapatalk

I 2nd the holmes puller pro.

Sent from my SM-G973W using Tapatalk

The rear axle is unique to this truck.
As it needs to have the ring gear on the other side. So save that for sure in case you need parts.

Sent from my SM-G973W using Tapatalk

Replacements, not just parts but whole components.If you are not familiar with taking apart and rebuilding diffs etc.(Its not so bad seems intimidating but it's really not).you can replace the whole...

We all bought trx 4s because at least there are aftermarket parts available to make it do what you want it to do.
Ah Traxxas why have you forgotten your faithful Sons and Daughters.
Lol maybe a...

Nice work looks good

Sent from my SM-G973W using Tapatalk

Usually means removing some tread blocks to open the tread up a bit.
Also siping,cutting slots or grooves in the blocks to make them more flexible and grabby

Sent from my SM-G973W using Tapatalk

Before you buy a new esc make sure it's not the internal bec gone bad.
I had one have random shutdowns etc.I bypassed the internal Bec.
ran a external bec and it worked fine again, still running it...

Exellent

Sent from my SM-G930W8 using Tapatalk

The exo cage will help, but 50 mph slides are hard on any material.
The cage is pretty durable,plus I believe you can buy just the cage separately so if they get broken or sanded down ;)you may not...

That is odd.something is causing the heat but what?Why only the front?Its gonna bug me till I know why.something would have to get pretty hot to transfer the heat to the shaft.is it rubbing on...

Follow grizz's test it could be a micro servo going bad.the evx 2 can do some weird things when a servo goes bad

Sent from my SM-G930W8 using Tapatalk

Savox are known to pull some amps.
So it is likely pulling more than can be supplied by the internal bec.
it is not a voltage issue it's a amp issue.A BEC is the simplest way to solve it.
...

Lvd's are cheap and loud.under 10 bucks and will display the cell voltages in real time plus alarm when they hit the set voltage

Sent from my SM-G930W8 using Tapatalk

Well if you do have some stuff.
https://youtu.be/R6YzJpYPReY

Sent from my SM-G930W8 using Tapatalk

Maybe not a ideal choice then.
Going fast is fun too.
But I'm spoiled I have it all where I am.Sea to sky.

Sent from my SM-G930W8 using Tapatalk