Search:

So i gave it a little test drive today guys, works great, keeps it planted to the ground, but you still have to be a little careful when doing hard cornering. Yes the body does fit over it. I did...

Hey guys, just thought I'd share. Made a sway bar for my slash out of some music wire, turn buckles, turnbuckle rods, ball ends, fuel tube, and assorted screws. check it out.
...

Whats the higheest turn of motor i can put in my slash without doing any damage? (brushed)

been thinking about making a rally car my self. What body do you plan on using?

after going to a track today and striping yet another spur, i'm finally going to switch over to 32 pitch gearing, but since i'm new to it, i need to get a few things straight.

1. what gearing is...

no problem hope you everything goes okay.

ya very true. If thats the case, you could probably buy a shock rebuild kit for cheap.

titan 12t > tamiya stock 540.

you know you can just change the battery to trx instead of changing your esc? plus, molex kinda stinks for a connector. very glitchy. My dad used them 20 years ago.... times are changing

I heard that aluminum shock caps don't fit 100% correctly with the stock shocks and are actually meant for the big bore shocks. This is probably why your sons shocks are leaking. If big bores are...

hey guys got a tip if you use nitro fuel to clean the chrome off the rims to make them black. IF YOU DON'T REMOVE THE FOAM INNER PIECE, THE FOAM WILL ABSORB THE NITRO FUEL AND WILL BE SOFT AND...

What about an aluminum chassis, would that transfer any unwanted energy to any unwanted areas?

I'm running 50 all around, works good.

part it out. You'll get way more by selling the expensive stuff individually.

body looks amazing! great job. I love the overall look of your truck. very tough.

ya i heated mine with a propane torch real quick. and it did the trick.

That is the factory gear setting?

it has been done... by me. :)

http://i229.photobucket.com/albums/ee133/xrhynox/DSCF0076.jpg
http://i229.photobucket.com/albums/ee133/xrhynox/DSCF0077.jpg...

for grass i recommend 16-18t for pinion and 90t for the spur.
Stock tires work fine for me in grass as long as it is kept short.

gearing for big tires... 17T/90T I have it, works great :)

I will just be bashing and I have some nimh batteries. One is 4200 the other 3300

I was just wondering what the [B]best[B] ezrun system is for the slash, please list amps and turns of motor and anything else that will help me! Thanks alot!

ya not to mention the losi pinions are made from a higher grade steel and are much better than the stock traxxas aluminum ones. I usually loosen mine about 1 turn off. It's been working well so far.

not all of it though. The titan has a built in fan which acts a vaccum and sucks in alot of dirt to the gears.

and and a temp gun should also be used. make sure that your motor/esc is not overheating.