Search:

Sounds like the magnets detached from the shaft.

Ebay has the motor and or the esc for 60 or the combo for 110. Meh, you can save $10 but you'll know it will be plug and play if you get the whole...

Flysky 3gtb

I usually place some tape or stickers in the wheel wells over the tires to prevent the tire from rubbing through the sweet paint job.

Wingardium Leviosa :D

This is a fun one with a ground vehicle.....
Go to a public park with peeps and get your r/c ready to go. Place it on the ground close to your 1:1 car so you're not seen...

Inflated c-ratings = fewer volts under load and more amps. More amps=undersized wires and connectors=heat.

Volts x amps = watts

I.R. guns are good for finding bottlenecks in the wiring.

Great job dude! The Gunmetal, window trim and wheel well flares really make it stand out.

IMHO, I would have changed the fox tail direction on the passenger side even though the source graphics...

That's what I use so all the speky guys at the track can blame me for interference. Is it my problem your radio is overpriced and getting stepped on?

Extra battery for lights=fail

You could plug it into the 3s voltage on your 4s balance tap or a BEC like mentioned above.

Traxxas needs to release a FAQ and answer t-shirt for every model type. So when you're out driving and the noobs start attacking with the same old questions. You can just say "See #1" and point to...

Did you use the switch instead of unplugging the lipo for overnight storage?



True, hard case just hides the puffing longer. Buy a hard case if you plan to eject your lipo often.

The old VXL...

Ah, you lost me when you said 78.

http://www.ebay.com/itm/NEW-HPI-SAVAGE-XL-4-6-17mm-hex-hubs-wheel-pins-nuts-/311676649939?hash=item48916041d3:g:D1MAAOSwimdXo4jd
http://i.ebayimg.com/images/g/D1MAAOSwimdXo4jd/s-l1600.jpg
$7.99 and...

oh like this one? https://traxxas.com/forums/showthread.php?9065354-Essential-parts-list-for-stronger-drivetrain-E-Revo-on-6S-required Because everybody wants to spoon feed this guy a half dozen...

True, but 11 years ago it was a little different. I mean 1/8 Novak systems was actually a viable option then.

1.5mm,2.0mm,2.5mm

Silly question

What's wrong with the stock center shaft? It's composed of one piece aluminum.

Give em a call, I can't say for sure.

We all like to run the MM2200kv 1/8 system in ours.

IMO I would go with a 1/10 4x4 stampede instead of the 1/16 MERV or even the 1/10 Revo. Easier to work on, the diffs are sized correctly and only one battery to charge. TSM is basically a gyro on...

Briber
No, they can't handle one system on 6s.

Joel
Y connect the ESCs to chan2 or you could buy a second receiver(they cost about the same as a Y connector) and run two completely separate...

Your going to dump a ton of money into it either way(mods or no mods), but how many times is question. And yes their marketing should end at 4s.

That's what I'm saying matrix and mudslinger. Why do people need the switch if you should always pull the batts anyways? The potential to forget them plugged in is a lot higher with the switch off....

Grrrr is right. Wait until you start blowing diffs. Just sell it in the market place.

Perfect!
Sell it and buy a plane.

After puffing my first lipo leaving it plugged in (even with the switch off), I've become an anti switch advocate.