Search:

you need to wide wheel hexes and thats about it. they are pretty disappointing for the price you cant really tension them so they skip under load

hey a couple things to do that will make the system super reliable if you go in mud and water. put dielectric grease in the sensor plug and paint all the solder points with liquid electrical tape. I...

it has all the controls you need plus a spare if you want to add controllable lights or a winch. its also really easy to program with the lcd screen....

flysky fs gt5 perfect for these trucks

set everything to max and you will pop wheelies

unless you cake where the shift fork goes in and all the output shafts they just pour water in if you do any submarine activity's then you let the truck sit for a week till the next weekend and find...

proline has a 91 4runner https://www.prolineracing.com/bodies/1991-toyota-4runner-clear-body.asp

if you run in the water the trans will eventually take on water and the bearings will rust and seize spinning on the shaft in the plastic case it only takes a few seconds and your bearing tolerances...

https://www.amazon.com/RCLions-Aluminum-Transmission-Gearbox-Traxxas/dp/B07C1NP5SR/ref=sr_1_1?dchild=1&keywords=traxxas+trx4+transmission&qid=1609732808&sr=8-1

hobbywing axe brushless system you wont regret it turns the truck into a monster

you gotta get the loaded aluminum tranny from rc lions its a great deal for 60$ you remove the only plastic gear in the gear train and get a better case

servos dead but also pop your transmission apart and check the bearings then load it with grease. if you take the truck through water make sure the run it around a little bit everyday after for a few...

im running the stock shocks the towers were just called cnc aluminum on amazon then I combined with shock keys from amazon. I did not have to extend anything the rear locker cables will be tight but...

the 3300kv one

which parts are you referring to? if you have the traxxas manual they have blowup diagrams of the truck with part numbers on every part. you can take that number and just search traxxas followed by...

I got the aluminum shock towers and ditched the plastic fenders. you can get about a half inch lift with shock keys which put the suspension right at a nice sweet spot where its not bottoming out on...

there should be stickeys for the TRX6

its the bane of traxxas they make great running gear but their electronics are 10 years behind

my trx6 gets to about 20 in 2nd gear with the axe system turned all the way up. its fun to take to the bmx track it clears most of the jumps

https://www.amazon.com/RCLions-Aluminum-Transmission-Gearbox-Traxxas/dp/B07C1NP5SR/ref=sr_1_1?dchild=1&keywords=traxxas+trx4+transmission&qid=1609732808&sr=8-1

the 60$ rc lions all aluminum loaded transmission is the way to go. I melted the case of my traxxas trans when I switched to brushless and had a bearing explode.

take the transmission and servo out with the servo still plugged in. remove the servo horn screw and pull it loose of the servo. push the rod all the way in to first gear. then turn everything on and...

put the hobbywing axe system in it. you wont regret it. you also dont need a bec with it the esc will put out 7v if you ask it to

get a stainless steel front bumper skid plate it has held my bumper and frame together through so really hard hits

yeah the scx has been sharing around the same frame width for a while