Search:

Type: Posts; User: olds97_lss

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    4
    Views
    99

    It will make the steering seem a bit slower as...

    It will make the steering seem a bit slower as well. The closer to the shaft you get, the less movement there is and the slower it seems, but the throw will shorten and torque will increase.

    I was...
  2. Replies
    5
    Views
    604

    I'm not sure what ESC you have, but you will need...

    I'm not sure what ESC you have, but you will need the esc calibrating instructions specific to the esc. The process calibrates the esc to the receiver so it knows what full throttle/idle/brake are.
  3. Replies
    4
    Views
    99

    You can try using the hole closest to the servo's...

    You can try using the hole closest to the servo's output shaft. That will increase torque, but also shorten the effective throw of the servo. This one has a hole pretty close to the output shaft, you...
  4. Replies
    20
    Views
    408

    I use both the stock battery hold down and a...

    I use both the stock battery hold down and a Pure-Tech holder that sticks to the chassis. I found that the stock hold down was flexing and popping out of the rear part which let my battery fly out...
  5. Replies
    53
    Views
    7,761

    New diff thread I made to discuss the 6780 diff:...

    New diff thread I made to discuss the 6780 diff:
    https://forums.traxxas.com/showthread.php?9097912-Hoss-monster-slash-4x4-stampede-4x4-center-diff-(6780)-oil-weight-on-4S-2200kv&p=6587989
  6. Thanks for the info. Gives me a better idea of a...

    Thanks for the info. Gives me a better idea of a starting point. I run some RC Station 3.8 (cheap amazon tires/wheels) that weigh 9.4oz each. So probably a bit larger OD than MX28 and a bit heavier...
  7. Replies
    17
    Views
    502

    Unless they have VDK pistons in them. I snapped...

    Unless they have VDK pistons in them. I snapped those things constantly and gave up using them in my e-revo 2.0. I used heavy'ish oil and they don't like that it seems. Kind of stinks because I liked...
  8. So what weight would make it a bit less wheelie...

    So what weight would make it a bit less wheelie pone with an alloy cup? 300k too light?
  9. Hoss, monster slash 4x4, stampede 4x4 center diff (6780) oil weight on 4S/2200kv?

    This is from another thread I have, but thought I'd start a new one for this specific question in hopes that other people are asking too much of their trucks and running 4S in them.



    My FLM...
  10. Replies
    53
    Views
    7,761

    Well, my FLM center diff is toast and I can't...

    Well, my FLM center diff is toast and I can't find another cup anywhere in stock. All reviews on the integy one are bad, hot racing not much better... The FLM got so worn that the brand new gasket I...
  11. Replies
    20
    Views
    408

    Yeah, down side of running the hot racing...

    Yeah, down side of running the hot racing aluminum servo saver/bell arms. If it was stock plastic, it probably would have ground down/heated up and the screw would have fallen out way before it did...
  12. Replies
    20
    Views
    408

    After blowing 2 of those apart when mine was...

    After blowing 2 of those apart when mine was still a stampede with 1/10th electronics (one on 2S, one on 3S), I got the tekno bone for it. Then when I got the slash chassis, I had to get the longer...
  13. Replies
    20
    Views
    408

    I think so... here's a photo of them next to...

    I think so... here's a photo of them next to traxxas 3.8 chevrons and 3.8" trenchers:
    https://www.dropbox.com/s/2klhetjiiek43z9/2021-0505-3.8TRXChevron-RCStation3.8MT-3.8Trencher.jpg?raw=1

    They...
  14. Replies
    20
    Views
    408

    I run 4S in my slampede 4x4. Takes some work and...

    I run 4S in my slampede 4x4. Takes some work and $ to get it to hold up though.
    https://www.dropbox.com/s/kr4g6aoh4phll41/2021-0408-stampede-PureTechBatteryStrap-side-high.jpg?raw=1

    X-01 spec...
  15. Replies
    17
    Views
    502

    Rod end or shock end or ball end, has various...

    Rod end or shock end or ball end, has various names. They thread onto the end of the shock shaft and if not fully seated, you will end up with shocks that seem like they are different lengths....
  16. Replies
    17
    Views
    502

    Could also be the longer shock doesn't have the...

    Could also be the longer shock doesn't have the shock end screwed on all the way which would make it appear longer.
  17. I've ran the sct sv3 for quite a while in my...

    I've ran the sct sv3 for quite a while in my stampede 4x4 on 2S and a bit on 3S, both with the 3800kv motor. It did fine, don't think I ever thermalled the esc really, but the motor did run warm. I'd...
  18. Anyone else having issues accessing the forum today?

    About half the time, I get a server not responding error today. Not sure why as I'm able to get to any other site it seems.
  19. Replies
    30
    Views
    2,255

    Thanks for getting those measurements. I guess...

    Thanks for getting those measurements. I guess since I only really seem to bang up the fronts, I could just get a set of 8619X for that and be done with it. Just wasn't sure if they had a tendency to...
  20. Sticky: Was able to meet up with a couple guys this...

    Was able to meet up with a couple guys this weekend again. Unfortunately, I broke the stampede pretty bad early in it's run, so not much video with it. Landed badly and ripped the RPM rear tower out...
  21. First run of the year with my eJato, 2021/05/01 at the bmx track

    Had a great day running trucks this weekend. Windy as all get out, which made jumping more difficult and video editing took way longer than normal, but was a good day just the same.

    Busted up the...
  22. Replies
    27
    Views
    5,283

    I had the 3660SL/3200kv version. I don't think I...

    I had the 3660SL/3200kv version. I don't think I ran it on 2S as I got it to run on 3S and it ran hot hot. More so than the castle 3800 did.

    That was the highest 1/10-1/8 kv motor I ever ran and...
  23. Replies
    5
    Views
    187

    Same. With fans, I run mine hard and occasionally...

    Same. With fans, I run mine hard and occasionally will see 165F at the motor on all my 6S RC's, but usually in the 145-155 range.

    Well, on my e-revo 2.0 and savage flux. The 4092 I just put in my...
  24. Replies
    2
    Views
    143

    I did mine somewhat similar. Still have my v1...

    I did mine somewhat similar. Still have my v1 carcass in the closet. Still has the trans, chassis and front RPM arms/carriers on it, but that's about it.

    I got the 2.0 so I could run 6S without...
  25. Good times! Had me chuckling to myself half way...

    Good times! Had me chuckling to myself half way through that!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4