Search:

I just bought the traxxas CVDs and will install them in the next day or two. I'll report back if I think they'll also solve your problem. It appears this shouldn't be a 3906 specific problem since...

http://www.youtube.com/watch?v=yvrRTCIvDlY

This is my son with his stock 3905 about 10 minutes before one of his venom 8.4v packs started to melt..... too many rev to forward wheelies.

I'm...

My son and I racing in the front yard.... He's using his stock 3905 Emaxx and I'm using the Summit with RC4WD Mudlslingers (40 series) on Rockster narrow wheels.
...

Thanks hugh

I checked tower and it's 93 dollars so 12 bucks cheaper and further away from the cyclones.

Here is my Mudslinger and rockster combo which is definitely taller than the stock tires.
...

I checked tower and it's 93 dollars so 12 bucks cheaper and further away from the cyclones.

How many cycles on the batteries and what kind of taps are installed?

If the revo 2.5 uses the 5mm flanged nut, you just take the 17mm hex assembly off the ERBE and install the pin, 12mm hex, and 5mm flanged nut from the 2.5 on instead but you'll probably strip out the...

RC4WD tires are serious business. I don't think they'll break because your bashing with them. I have the Mudslingers and the quality is top notch. They are soft enough to deform on rocks but there...

I couldn't figure out if anyone answered you. The Balance plug provides a direct connection to each Cell vs. the main power leads which connect to the first and last cell in the pack where the cells...

http://farm5.static.flickr.com/4009/4627505075_03c2312cf6.jpg

http://farm5.static.flickr.com/4039/4627505617_6fe91cd248.jpg

I just got my RC4WD 40 series mudslingers. woo hoo. I do have to say they handle very good even at higher speeds and the larger diameter resulted in a top speed increase.
...

MOA - Motor on axle is more torque with two motors but not a marketing gimmick. The result is lower center of gravity (CG) and the ability to DIG without having to disengage the transmission from...

http://www.youtube.com/watch?v=nArFvRLDlMM

http://www.youtube.com/watch?v=9SZ169ZQx8A&feature=channel


In the video primary differences are it was running stock emaxx talons which only lasted...

http://farm5.static.flickr.com/4036/4620382311_31d2af91e2.jpg

http://farm5.static.flickr.com/4046/4620383469_44d68eb0e8.jpg

http://farm4.static.flickr.com/3332/4620381307_9d23a6a210.jpg
...

Integy Monster On Road Master black.

http://farm5.static.flickr.com/4072/4620995796_5db5e29042.jpg

http://farm5.static.flickr.com/4034/4620383963_41eb5243c9.jpg

What charger did you get. I may be in the market if i can't get my pro-tek 1010b+ looked at. a spark shot through it when i tried to charge dual 3S packs in series.

I don't know what Tekin you're referring to when you say isn't easy to program. You can program right on it very easily as long as your vision is good (text is small) and it does have Lipo cutoff up...

The wheels are Proline Commandos... not Cheyennes.

Angle without hub covers.

http://farm3.static.flickr.com/2427/4531885610_498ded6cf8_b.jpg

http://farm3.static.flickr.com/2688/4531884158_58286f3a4c_b.jpg

With hub covers on.
...

You keep the drive pin and the original wheel nut to secure the 23mm hex onto the stub axle. I had to use thread locker. My original wheel lock nut nylon wasn't strong enough to hold up against my...

Here is a picture of a Tekin RX8 w/ 2000kv 4038 Motor mounted on my Emaxx project truck which started off as an Ebay roller. I took nice close up pictures that show the slipper and single motor...

I'm inspired again. I started dusting off, wrenching and messing with my cars again. The weather is finally letting up in the North east. It was beautiful today.


I've attached a picture of my...

I got my 5 year old son an Emaxx for Christmas just past (09) and I liked the new design so much i picked up a roller on ebay and am working on a project brushless emaxx. I'm thinking about using...

I travel to Dallas area all the time for work.