Search:

Type: Posts; User: Double G

Page 1 of 20 1 2 3 4

Search: Search took 0.37 seconds.

  1. Replies
    11
    Views
    118

    That's too big. Just use your finger and thumb...

    That's too big. Just use your finger and thumb to pinch the line to shut the engine down. Or the red clip it came with stock. Don't leave fuel left over in the tank as it absorbs moisture from the...
  2. Replies
    2
    Views
    78

    For the most part the stock diffs are the same...

    For the most part the stock diffs are the same except for a couple cut-outs for the I-bar and it's support. The XO-1 diff is a great mod for the Slash but if you want the unseen pretty colors then...
  3. Replies
    3
    Views
    58

    The .21TM with the Revo manifold.

    The .21TM with the Revo manifold.
  4. I've watched a few of his videos and I like that...

    I've watched a few of his videos and I like that it shows the voltage applied as well as the torque and amps the servos are pulling when maxed out.



    As rag6 mentioned and from what I've been...
  5. Replies
    11
    Views
    118

    I've set the idle and forgotten about it. Tune...

    I've set the idle and forgotten about it. Tune with a hot engine and around half a tank and confirm there is a genuine 3-4 seconds at the pinch test. Don't automatically think you need to lean the...
  6. Replies
    2
    Views
    85

    Try a new one.

    Try a new one.
  7. Replies
    9
    Views
    243

    Yes you can use those electronics. Just purchase...

    Yes you can use those electronics. Just purchase the proper pinion for your tire size and performance desires.

    You can use just about any other non-Traxxas ESC/motor combo that would fit and some...
  8. Replies
    33
    Views
    795

    Sounds like a great mod and quite an advantage to...

    Sounds like a great mod and quite an advantage to have a longer stroke shock on the front. But it looks so out of place and too large. IMHO.
  9. Replies
    8
    Views
    200

    In my experience I have not been able to spin the...

    In my experience I have not been able to spin the gears when they are installed due to the gear reduction in the system. What I've found that the motor will continue to spin one direction or the...
  10. Replies
    5
    Views
    190

    I hope you didn't waste $120 on Integy for all...

    I hope you didn't waste $120 on Integy for all those parts. They may look pretty and "strong" but are more like Jason Momoa in the Rocket Mortgage commercial. :lol:

    IF you didn't take them out...
  11. Replies
    11
    Views
    222

    With lipo battery each fully charged cell is...

    With lipo battery each fully charged cell is 4.2v. Many will argue over the safe minimum voltage - some say 3.0v, some say 3.2, etc. The owner of the late SPC Racing said a safe LVC for the ESC is...
  12. When installing a new servo, you need to center...

    When installing a new servo, you need to center the trim, turn TSM off, turn on the radio system and install the horn. Once you are satisfied with the throw of the servo you can fine-tune the end...
  13. Replies
    9
    Views
    293

    You can go different size wheels - just...

    You can go different size wheels - just disconnect the front.
  14. Many go with 40wt. I currently run 30 wt and...

    Many go with 40wt. I currently run 30 wt and recently changed from stock black springs to VG Racing. Haven't taken it out yet as I've been working a bit and it's been too hot/humid outside. From...
  15. Agree 100%. He has been fantastic to work with...

    Agree 100%. He has been fantastic to work with and I'm more than happy to keep a small business alive. The only problem is the quality is so good that I can't be a frequent customer. :lol: ...
  16. Thread: Rustler

    by Double G
    Replies
    15
    Views
    415

    Yes. Through the Support button above you can...

    Yes. Through the Support button above you can download the exploded views of the trucks.
  17. Replies
    3
    Views
    166

    No, but as the parent you are not to be...

    No, but as the parent you are not to be controlled by a four-year-old. Have him obey or there will be consequences consistent with the offense (such as no driving for a week. Or the next five...
  18. Tighten it down. If you up the thickness of the...

    Tighten it down. If you up the thickness of the oil you'll need a stronger spring. Go too heavy of oil and the spring will not be able to properly rebound the shock which will result in very sloppy...
  19. Replies
    2
    Views
    95

    Slash VXL manual page 28:

    Slash VXL manual page 28:
  20. Replies
    3
    Views
    85

    Any open port in the receiver. The middle and...

    Any open port in the receiver. The middle and right pins are power; the left pin is signal output. Make sure that the red and black are connected to the middle and right pins. If the fan came with...
  21. Replies
    16
    Views
    319

    If the sound is made went the truck is moving...

    If the sound is made went the truck is moving then it most likely involves a part that spins. Could be a diff, could be a loosened screw, could be a stick in the wheel.
  22. Sorry to hear of the troubles. The charger that...

    Sorry to hear of the troubles. The charger that comes with the truck is a very inexpensive one. I don't prefer it as you are limited to using your auto to charge it and leave the battery in the...
  23. Replies
    14
    Views
    369

    Good explanation. Another way to think of it is...

    Good explanation. Another way to think of it is your bicycle: the pinion is the front gears and the spur is the rear gearset. Start pedaling and switch gears - which is easy from a start and what...
  24. Replies
    16
    Views
    319

    Where is the sound coming from? Front? Back? ...

    Where is the sound coming from? Front? Back? Middle? You'll need to isolate the various suspect areas and then repair/replace the broken parts.
  25. Swap the ESC and servo plugs at the receiver and...

    Swap the ESC and servo plugs at the receiver and see if the problem follows the servo or the channel.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4