Search:

Type: Posts; User: RICK DIZZLE

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    5
    Views
    60

    Yeah just spur and pinion, you are correct. I am...

    Yeah just spur and pinion, you are correct. I am unsure how big the Hoons are height wise vs the GRPs. You can start 20/46 and see how it handles and responds. Just watch your ESC and motor temps....
  2. Replies
    5
    Views
    60

    You will have to regear it as you drop tire size....

    You will have to regear it as you drop tire size. I run 1/5th GRPs on my street truck for street racing. If you run stock gears with smaller tires you will be far slower then stock set up....
  3. I wired my fans together to one plug. Then you...

    I wired my fans together to one plug. Then you just plug them directly into a 2s receiver battery. Just be disciplined in checking your voltage between runs. I usually just recharge the receiver pack...
  4. The fans should spin relatively free with just a...

    The fans should spin relatively free with just a tad of resistance...I never run any of my fans off of my receivers. I run all my fan set ups off of a 2s reciever lipo pack, stand alone. On my basher...
  5. Thread: Erevo GPS

    by RICK DIZZLE
    Replies
    1
    Views
    163

    I went the cheaper route I can use on a my rigs....

    I went the cheaper route I can use on a my rigs. A small GPS I can strap on to any vehicle in run. Its the SkyRC GPS. Works great is just about dead on.
  6. Replies
    1
    Views
    204

    Put it on a vise and crank it closed. JUST...

    Put it on a vise and crank it closed. JUST KIDDING!!!! LOL! Post some pics and we can try to give you some actual ideas.:thumbup:
  7. Replies
    19
    Views
    953

    I wish EMperformance would make us some titanium...

    I wish EMperformance would make us some titanium drive cups! Boom! Issue fixed. They are only $20 a set for stock...so not to worried. Just be nice to not have to flop them...then replace.
  8. Replies
    19
    Views
    953

    Only thing I've ever seen, my brother split a...

    Only thing I've ever seen, my brother split a drive cup in two on a bash session...weirdest thing we have ever experienced driveline wise. Pretty sure it was a production anomaly. Otherwise just...
  9. Can you take a pic from the top down like this?...

    Can you take a pic from the top down like this? Curious to see your shocks and preload along with the position of your rockers. Wonder if its a bent rocker...
  10. Replies
    9
    Views
    771

    Dude those things are nice, and respective to...

    Dude those things are nice, and respective to what some of the RC companies charge for bags that size...good pricing as well!
  11. Did you happen to use the dreaded self-right...

    Did you happen to use the dreaded self-right feature? Open the pinion/spur cover and see if the motor worked itself a tad loose and maybe you ate a gear there. Hopefully easy and we can get you up...
  12. Yeah I broke several Yeah plastic fans landing on...

    Yeah I broke several Yeah plastic fans landing on my lid from high heights, even bent several aluminum housings. I have run the R1s on my street truck for about a year with no issue. But it doesnt...
  13. I run R1 fans on my rigs now. They move much more...

    I run R1 fans on my rigs now. They move much more air but are only plastic cases. They are quiet fans and move a ton of air. Got sick of trashing the Yeah racing fans. R1s have been my best path thus...
  14. Replies
    16
    Views
    734

    Same boat here. My street truck was fine..now...

    Same boat here. My street truck was fine..now after most recent updates TSM is making my steering super slow with my aftermarket servo. I have to mess with it and find a sweet spot to work correctly.
  15. Replies
    8
    Views
    576

    I run both my fans off a 2s receiver lipo on all...

    I run both my fans off a 2s receiver lipo on all my E Revo's. I mount the 2s lipo to my chassis brace. Never had an issue.
  16. Replies
    5
    Views
    429

    Something is causing the heat. I run my street...

    Something is causing the heat. I run my street ERevo 2.0 on GRP 1/5th street wheels and EMperformance adapters..run a ton of speed runs at high speeds, my hubs get warm but never hot.
  17. Replies
    5
    Views
    429

    I'm leaning towards bad wheel bearings as well...

    I'm leaning towards bad wheel bearings as well causing drag, thus heat and then softening the wheel to failure.
  18. Replies
    19
    Views
    1,255

    This is getting ridiculous! I know there are...

    This is getting ridiculous! I know there are hundreds out there with no problems with ESCs but come on. How many have we seen fail just on our forum. Granted more will post with issues then not...but...
  19. Replies
    19
    Views
    1,255

    We have got to hear the story behind this! Pics...

    We have got to hear the story behind this! Pics of aftermath?
  20. You should not need to change a pinion to get...

    You should not need to change a pinion to get this thing to wheelie and such from the box. If you are running good batteries and such, this thing is a powerhouse from the box. As others have...
  21. Replies
    8
    Views
    491

    You never just wanna squeeze it as tight as you...

    You never just wanna squeeze it as tight as you can for mesh. You need a tiny amount of gap. I use a strip of traditional white printer paper. You want to put the paper in between the spur and...
  22. Replies
    8
    Views
    491

    Is it whining or grinding? Two different sounds...

    Is it whining or grinding? Two different sounds for sure. Did it just and immediately start after the gear change? These motors are known to toast themselves, whether it the bearings or the rotor....
  23. Replies
    1
    Views
    240

    Never tried...but the 2.0 bodies cost the same as...

    Never tried...but the 2.0 bodies cost the same as the other bodies:

    https://www.amainhobbies.com/traxxas-erevo-vxl-2.0-monster-truck-body-clear-tra8611/p742306

    Maybe you were looking at bodies...
  24. Also check to make sure truck isn't in training...

    Also check to make sure truck isn't in training mode.
  25. I just split mine and soldered em up and repinned...

    I just split mine and soldered em up and repinned the connector. I run mine off a lipo reciever pack cuz I'm overly ****.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4