Search:

No issue with caps either....
Had a few lower spring bases/seats blow out on GTR shocks.

Sent from my Nokia 6.1 using Tapatalk

Losi cab forward body, strc ebuggy kit on a lcg chassis fit like a...

I'd personal look into a set of 12mm Losi or associated shocks, heaps of different lengths, shafts and bodies, springs, pistons, seats and caps, etc...

But the Traxxas #7462x GTR are 12mm bore,...

Nice, given me a bit inspiration for a spare xo1 chassis to use under my ebuggy sl4sh, may try mounting some cheap alloy bulkheads, front n rear to a cut xo1 chassis....

There's a few aftermarket...

Try the RPM wide rustler front arm for extra width and even more stability...
Longer camber links and rustler rear arms required!

Also look into H/D axles, I run the 4x4 slash rear axle #6852...

Most modern LCD screen lipo chargers have a setting/function for storage just like balance, fast, discharge and storage charge plus some have Lipo, lilo, life and LIHV (lipo high voltage) as well as...

Serpent 1/8 body, McLaren F1!

Sent from my Nokia 6.1 using Tapatalk

Castle 3800kv is great on 2s, plenty power.
I just run a cheap eBay lipo charger and always put lipo on storage after use

Sent from my Nokia 6.1 using Tapatalk

Get 2wd fronts for all, front n rear!

Sent from my Nokia 6.1 using Tapatalk

You can get 2x different offset 2.8 rims as stampede/rustler use different length arms, front to rear.
The electric fronts are a deep offset giving more track/width whilst rear rims are shallow...

Trenchers are great! Make sure you get 4x fronts so you can rotate tires and get the extra width!

Sent from my Nokia 6.1 using Tapatalk

Monster slash 2wd is probably the best handling 2wd Traxxas! Good traction from big tyres, Bellcrank steering, longer wheelbase and if you go 4x electric front wheels, wider track!

Sent from my...

Motor mount is xo1 with cush drive, To use slipper or centre diff you just space motor mount forward by redrilling chassis and fabricate a custom top chassis plate, then just shorten an xo1 centre...

Xo1 cut to suit slash wheelbase...
Hope it helps with placement, slash lcg bellcrank and repositioned xo1 servo mount, had to move receiver box with 1/8 scale electrics but did fit receiver box,...

Xo1 and steel cv are same, good for 100mph n 6s! only the outer hubs are different 5mm n 6mm! Only problem Ive had is when a real car didn't stop, I did! Ran over my beast, wrecked a shell and bent...

I have some weird long pins sitting there that I somehow acquired... look like the anza king pins but I drill steering block to 3mm and use a M3x50mm 'hi tensile' bolt cut to length, use a long bolt...

Stainless where requiredhttps://uploads.tapatalk-cdn.com/20190120/6b758fbc0a753972d6d4d43fe2d31c0f.jpghttps://uploads.tapatalk-cdn.com/20190120/991d369159272c5bf4f2ef7e017ac542.jpg

Sent from my...

I run this beauty on a huge backyard turf track,
It was a slash originally and chassis/body swap to a bandit as bit shorter and heaps lighter without the huge slash body n bumpers.

Motor gets a...

Second that, always happy to help to have fun!

Sent from my Nokia 6.1 using Tapatalk

Thanks, 1/8 scale wheel/tyre with Traxxas 17mm adaptors #5853x. Runs slash arms, 4x4 hd axles, b6.1d wing mount and rpm nitro slash front shock tower plus heaps of other little bits and mods.

Got...

Great mod! Ive had a bit of luck with semi sealed stock housings, using orings on outputs.
I've found using the supplied HR shims between the outdrives really helps with sungear chatter.
I even...

Yeah swapped them to compression limiters.
Got some 40wt and 1.4,1.5,1.6mm 2 hole pistons to experiment along with the longer Losi shafts.

Been concentrating on 2wd racing, getting more...

monster truck body eg. Stampede, bigfoot, craniac can all fit bandit, study the exploded veiws, get some stampede/craniac adjustable body mounts and with a range of arms available esp rpm rustler...

Has anyone fitted an Integy rollcage to a rustler or bandit and can show pics?

You can always fit a rustler body, front body mount and save a heap of unwanted weight....

Sent from my Nokia 6.1...

Got some 48mm Losi shafts ordered for the front xo1 shocks and hoping to help with on power stability by giving it a bit extra droop.
Had a few issues, spring bases breaking or the spring popping...