Search:

Type: Posts; User: TwoBelugas

Page 1 of 18 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    8
    Views
    2,876

    I think the reason why no one commented is...

    I think the reason why no one commented is because the platform is somewhat too small and low for general bashing. An LCG slash 4x4 has only like what, 1.5 inches of ground clearance if that. I...
  2. Replies
    4
    Views
    112

    The stock tires were designed for a set of...

    The stock tires were designed for a set of situations and are in no way the only ones to use. Nothing is stopping you from running badlands all around.

    For a good all around tire, try the...
  3. Thread: Gtr shocks

    by TwoBelugas
    Replies
    2
    Views
    149

    The newest version used on the latest ultimate...

    The newest version used on the latest ultimate also has a locking spring perch on the bottom that doesn’t hop out of the rod end
  4. Replies
    6
    Views
    146

    The scorched rc fenders for the lcg Sl4sh should...

    The scorched rc fenders for the lcg Sl4sh should work okay once trimmed down to fit inside the smaller stadium truck body, but you will probably need to drill some holes on top of the shock towers to...
  5. ^proline makes some great choices for pavement...

    ^proline makes some great choices for pavement hijinks.

    Before you get them, try your car on 3s with the stock gearing, the stock tires are vastly underrated, they do a good job of breaking...
  6. Replies
    19
    Views
    343

    I think proline just came out with a Bugatti like...

    I think proline just came out with a Bugatti like speed run body for the slash
  7. Replies
    19
    Views
    343

    I think proline just came out with a Bugatti like...

    I think proline just came out with a Bugatti like speed run body for the slash
  8. Replies
    13
    Views
    379

    Get a proline adjustable body mount kit and you...

    Get a proline adjustable body mount kit and you will have a ton of flexibility in different size tires later on.
  9. Replies
    6
    Views
    170

    Hot racing makes a good one for slash 4x4 that...

    Hot racing makes a good one for slash 4x4 that should work.
  10. Replies
    2
    Views
    104

    The rustler is a great way to have a LCG version...

    The rustler is a great way to have a LCG version of the stampede. Worst comes to worst you can switch back. Check out ebay or better yet jennyrc for the parts you need. I think at most 30 bucks or so...
  11. Give them a call, yours sounds like a defective...

    Give them a call, yours sounds like a defective unit. Traxxas is very good at honoring their warranty.
  12. Replies
    13
    Views
    321

    Not much. They are constructed specifically to...

    Not much. They are constructed specifically to not balloon as much as, say, duratrax Bandito mt sized tires.

    The thing I like about the prolines is that they have enough rubber to absorb the...
  13. Replies
    13
    Views
    321

    :thumbup: I was looking at my box o tires and...

    :thumbup:

    I was looking at my box o tires and a few others that I overlooked

    -proline prime 2.8. A little slippery when cold but once warmed up not too bad and provides a lot more cushion than...
  14. Replies
    4
    Views
    299

    Go one level up from that on their site shows a...

    Go one level up from that on their site shows a clear option for 30 dollars cheaper. Seems like a good option for those of us who have boxes of paint sitting around. :wacko:
  15. Replies
    12
    Views
    382

    Make sure you clean the motor shaft as much as...

    Make sure you clean the motor shaft as much as possible. Also, don’t forget to put a bit of blue locktite on the end of the grub screw where it contacts the motor shaft. Let it dry for at least day...
  16. Replies
    13
    Views
    321

    Try also duratrax Bandito 1/8 buggy mounted...

    Try also duratrax Bandito 1/8 buggy mounted tires. I had good luck running them on pavement up to 4s 2200kv power.
  17. Replies
    6
    Views
    153

    Yeah....no, let’s not do that.

    Yeah....no, let’s not do that.
  18. Replies
    12
    Views
    415

    Swap the left and right front stub axles and see...

    Swap the left and right front stub axles and see if still pulls left. If so, check the bearings since a binding bearing will cause the car to pull to one side.
  19. Replies
    12
    Views
    242

    I would look into the hot racing ones like...

    I would look into the hot racing ones like Te117fl for 2wd slash/rustlers, the front has a wider offset than the rear like the stock hexes fo make up for the narrower front arms

    I bought several...
  20. Replies
    12
    Views
    242

    Yeah those would work fine. Be aware that they do...

    Yeah those would work fine. Be aware that they do slide more when cold so steering input won’t work as well. What kind of 17mm hex do you have?
  21. Replies
    12
    Views
    242

    For speed runs get a set of 17mm hex adapters and...

    For speed runs get a set of 17mm hex adapters and run grp 1/8 belted mounted on road tires. Much lighter than the usual choices and smaller diameter means the car will be lower to the ground.
  22. Replies
    11
    Views
    337

    I don’t think the scorched rc I got from a main...

    I don’t think the scorched rc I got from a main came with scissors, I remember I didn’t really care since I had plenty of scissors

    I don’t know why they are not more popular. After running them on...
  23. Replies
    11
    Views
    337

    Amain sells them I think if you are thinking of...

    Amain sells them I think if you are thinking of scorched rc. Make sure you get the right version lcg vs hcg. I have a set for my lcg and it’s great. It does limit you to the stock body or similar...
  24. Replies
    3
    Views
    192

    The 7411 clear body is still widely available,...

    The 7411 clear body is still widely available, you can get one and paint it any way you want it. *cue Journey*

    Ebay also has a bunch of deltaplastik 325mm bodies for slash that should work fine...
  25. Replies
    2
    Views
    269

    Do you already run a a center diff? If not, it...

    Do you already run a a center diff? If not, it does wonders to be able to put down tons of power via the front wheels without flipping it when you gear down for acceleration. The new 6780 is a very...
Results 1 to 25 of 429
Page 1 of 18 1 2 3 4