Search:

Type: Posts; User: dgechrgr469

Page 1 of 20 1 2 3 4

Search: Search took 14.48 seconds.

  1. Replies
    1
    Views
    206

    I'm thinking my charger might have a poor...

    I'm thinking my charger might have a poor connection. It started showing a bad cell in more batteries, 2S and 3S. I fiddled with it a bit and it started reading the cell voltage correctly. I do...
  2. Replies
    1
    Views
    206

    3s batteries with one dead cell

    I have found a couple batteries I have were causing issues with the low voltage cutouts on the esc. I went to put them in storage when the Traxxas charger showed the battery had a bad cell on each...
  3. Replies
    9
    Views
    359

    I haven't tried using the "Octane" body on a...

    I haven't tried using the "Octane" body on a standard width 2wd but I suppose it would work. Is that body supposed to resemble a Camaro? It almost looks like a Duster/Dart in some photos.

    Sent...
  4. Replies
    9
    Views
    359

    This info might be in the links above. The only...

    This info might be in the links above. The only "drag" car body that fits the 4x4 is the Pro-Line Octane. All the others are meant to be used with the Bandit arms, links and axles on a 2wd.

    Sent...
  5. Replies
    12
    Views
    438

    Good points Mr. Wolf, i use stiffer springs when...

    Good points Mr. Wolf, i use stiffer springs when needed to get the ride height i want without decreasing the travel of the shock by preloading the spring. I think a lot of people don't understand...
  6. Replies
    12
    Views
    438

    It depends on your intended use, heavier oil will...

    It depends on your intended use, heavier oil will help prevent "slapping" the chassis bottom on jumps etc. Personally I like my suspension to work so I use as light an oil that will prevent spring...
  7. Replies
    60
    Views
    10,762

    My issue with traxxas batteries is the low c...

    My issue with traxxas batteries is the low c rating. I haven't seen any over 35c.

    Sent from my VS996 using Tapatalk
  8. Replies
    17
    Views
    1,511

    I am very impressed on how quick and straight...

    I am very impressed on how quick and straight your car goes. Is a 4x4 better for speed runs than a 2wd? Do you do anything to slow down the steering? I am trying to build some drag cars, so far I...
  9. Replies
    12
    Views
    933

    The "kit" also has longer toe and camber rods...

    The "kit" also has longer toe and camber rods which are also available separately. You might be able to lengthen your stock rods but I prefer the rod end thread engagement with the longer rods. If...
  10. The GTR front springs I have vary from 1 3/4" to...

    The GTR front springs I have vary from 1 3/4" to 2 1/4" and the backs vary from 2 1/4" to 2 3/8"

    Sent from my VS996 using Tapatalk
  11. I don't know the part # for the shock rod ends...

    I don't know the part # for the shock rod ends but with some searching on the Traxxas website it should come up.

    Sent from my VS996 using Tapatalk
  12. P.S., the coloring on the spring numbers i gave...

    P.S., the coloring on the spring numbers i gave are actually double stripe springs. That might have some significance in identifying the difference between GTR spring lengths.

    Sent from my VS996...
  13. Your black springs are probably in the medium...

    Your black springs are probably in the medium range and i also believe they are from a XO-1 or Rally. I would go with Traxxas 7448 (blue .892) for the front and either 7447 (pink .884) or 7449 (blue...
  14. Replies
    5
    Views
    314

    It depends on the body you use. The "drag" car...

    It depends on the body you use. The "drag" car bodies are narrower and require the bandit arms unless you want the front and rear tires sticking out of the body.

    Sent from my VS996 using Tapatalk
  15. I always liked the 70 and up Cuda/Challengers....

    I always liked the 70 and up Cuda/Challengers. Only Cuda i didn't care for was the year they had 4 headlights. (72?) I had a 68 or 69 GTX I bought for $300, raced it for a summer then tore it down to...
  16. Just checked, my welder is a model 180. I was...

    Just checked, my welder is a model 180. I was told they are a generic Miller. Didn't get a spool gun with it, probably couldn't get one now. The Farm and Fleet store here in N. Illinois carried it...
  17. Yes, bought my 69 Charger used in 12/72. Had to...

    Yes, bought my 69 Charger used in 12/72. Had to trade in my 68 Charger R/T that I bought that same year for $1000. Couldn't afford the ins. premium

    Sent from my VS996 using Tapatalk
  18. I have owned a Hobart mig welder for 15 years,...

    I have owned a Hobart mig welder for 15 years, it's the smallest (?) 230v model they had at the time. Forgot to check what model it is exactly but i believe the 210. I do not have a spool gun but i...
  19. It shouldn't get hot, it's a capacitor not a...

    It shouldn't get hot, it's a capacitor not a resistor.

    Sent from my VS996 using Tapatalk
  20. I believe the stock traxxas layshaft will fit the...

    I believe the stock traxxas layshaft will fit the pro-line trans. You could then get a metal spur and use a Traxxas slipper or a upgraded slipper with it. I haven't seen metal spurs that fit the...
  21. Slash 4×4 ultimate roller $125 good deal?

    Not keeping your electronics from the 2wd and not getting the electronics on the 4x4 I see this costing you the price of a new VXL 4x4, one plus is it looks like a LCG chassis.
  22. Replies
    18
    Views
    730

    Is it a nylon locking type wheel nut? Sent...

    Is it a nylon locking type wheel nut?

    Sent from my VS996 using Tapatalk
  23. Replies
    3
    Views
    316

    Thanks, I really did not know, my researching...

    Thanks, I really did not know, my researching didn't answer my question clearly.

    Sent from my VS996 using Tapatalk
  24. Replies
    3
    Views
    316

    ESC with motor limit?

    I have a esc which has a motor limit of 10.5 turns, does that mean it can't be used with a motor of lower or higher amount of turns?

    Sent from my VS996 using Tapatalk
  25. Replies
    1
    Views
    345

    Use spacers on the shock springs or get stiffer...

    Use spacers on the shock springs or get stiffer spring, also if you shocks are more vertical will give you a little more height. If your rear bearing carriers have two holes for attachment to the...
Results 1 to 25 of 485
Page 1 of 20 1 2 3 4