Search:

Type: Posts; User: TwoBelugas

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Not sure if it belongs here or the other sub forum...my fiesta st sleeper

    So I was bored and decided to build a sleeper that is also functional basher. That means all electronics are bolted down instead of relying on adhesive tape, and parts are picked for function rather...
  2. Replies
    0
    Views
    69

    My 1/10 Fiesta ST sleeper

    So I was bored and decided to build a sleeper that is also functional basher. That means all electronics are bolted down instead of relying on adhesive tape, and parts are picked for function rather...
  3. Replies
    7
    Views
    309

    I thought, now I could be wrong, but the xo-1...

    I thought, now I could be wrong, but the xo-1 came stock with 5379x and 6879 straight cut gear sets, with 5379r and 6879r as optional. It does come with the stronger internal gears that use the same...
  4. You can gently poke the hole with a 1.5 mm wrench...

    You can gently poke the hole with a 1.5 mm wrench and measure how deep it goes in before hits something, measure that length(A). Now put your counter sunk screw in the plate and see how much it...
  5. Replies
    7
    Views
    309

    The 12/47 ratio is for the brushed motors to stay...

    The 12/47 ratio is for the brushed motors to stay cooler. I think the vxl ones ratio is more like 1:3 to go with the higher power that the brushless system outputs.
  6. Did you not like the look of the MIP 17mm adapter?

    Did you not like the look of the MIP 17mm adapter?
  7. Replies
    25
    Views
    1,016

    :lol: I see what you did there.

    :lol:

    I see what you did there.
  8. https://live.staticflickr.com/65535/50433200728_67...

    https://live.staticflickr.com/65535/50433200728_67405514fd_z.jpg
  9. Replies
    3
    Views
    141

    Hear hear. Sad day indeed.

    Hear hear. Sad day indeed.
  10. Replies
    30
    Views
    1,509

    It’s actually not a rustler 4x4 chassis, but more...

    It’s actually not a rustler 4x4 chassis, but more of a one inch longer stampede 4x4 chassis.
  11. I知 not sure I知 onboard fully, I知 sure they...

    I知 not sure I知 onboard fully, I知 sure they tested it enough but the skinny shafts and the 5mm stub axle with hole through it gives me pause.

    Oh and the price too.

    But I知 sure they will...
  12. Replies
    30
    Views
    1,509

    I hope not but I think you are right. The number...

    I hope not but I think you are right. The number of clipless bodies is steadily increasing: xmaxx, maxx erevo, Rustl4r, now the hoss.
  13. Replies
    2
    Views
    310

    Try vg racing brace...

    Try vg racing brace
    https://www.vgracing.com/product/Rustler_4x4_Chassis_Brace.html
    And use spacers. They even sell a hardware kit for the slash OBA modules that might work with the rustler 4x4...
  14. The vxl-6s from the udr is unique in that it...

    The vxl-6s from the udr is unique in that it comes with one 4s connector and one regular connector in a series set up, and they have a factory jump to plug in the 2nd connector so user can run one...
  15. Replies
    6
    Views
    317

    You could always try the rear set up from a...

    You could always try the rear set up from a rustler 4x4
  16. Folks have been putting the vxl6-s esc in the hcg...

    Folks have been putting the vxl6-s esc in the hcg Sl4sh chassis for some time now, so there is no reason why a vxl-4s can稚 fit with a mounting plate. But expect to upgrade driveshafts and assorted...
  17. Replies
    30
    Views
    1,509

    The description on the video says jconcepts...

    The description on the video says jconcepts chopper tires but I want to know what wheels those are too, looks real sharp
  18. Thanks Squeegie, I call it my “mini mustard...

    Thanks Squeegie, I call it my “mini mustard monster”. Lol.
  19. My P4de with Hoss bumper courtesy of GotNoRice and tekno

    This is my light weight basher that I build to have fun without going over 2s. It is perfectly capable of standing backflips on 2s battery, some stuff added to stock

    Proline 1950s pickup body ...
  20. Replies
    5
    Views
    562

    I followed suit and this is what came about....

    I followed suit and this is what came about. Thanks again for the idea

    https://live.staticflickr.com/65535/50402990201_0732462ebe_b.jpg
    ...
  21. I did and itching to do it. I got a second vg...

    I did and itching to do it. I got a second vg racing cage and mounted on my lcg chassis build and it is a lot more stable now, so some bigger tires are in order. Thanks for trying it and giving us...
  22. Replies
    7
    Views
    417

    I was thinking 18/54 might be geared too low for...

    I was thinking 18/54 might be geared too low for that kv and 6s, perhaps 22/54 or higher might have kept the rpm of the motor in check.
  23. Replies
    5
    Views
    562

    Interesting. Thank you for the comparison shots...

    Interesting. Thank you for the comparison shots before and after. The rpm bumper not linking up with the stampede bumper always bother me and not running the stock p4de bumper makes the front too...
  24. Replies
    7
    Views
    417

    Plan on spending 140 for new MIp axles, and about...

    Plan on spending 140 for new MIp axles, and about 200 for the stronger spiral cut diff ring gear and internal gears, if you plan on bashing with 6s. For speed run just look at what the XO-1 uses...
  25. Replies
    30
    Views
    1,509

    And the self fighting 吐eature. That can稚...

    And the self fighting 吐eature. That can稚 possibly help the failure rate.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4