Search:

I would order the replacement part. I have found that epoxies (or any adhesives) do not hold up very well for bonding plastics together. i would consider it to be a temporary fix.

I am running the Traxxas 2250 (blue) servo in my Rustler, with Belted Trencher tires. Servo performs great - no issues - pretty much plug and play. I put a Traxxas 2255 (red) servo in my ERevo V2...

Just an observation .... in your picture, the pinion gear in the background is for straight cut gears .. not spiral cut gears.

I am running stock arms, with the RPM rear carriers. I have used the RPM threaded hinge pins on rear upper and lower, as well as front upper and lower. I had to modify the front upper pin to fit...

I would suspect that you need to push the pins out of the connector on the ESC and install them in this included connector, so that you can tap into the battery.

I replaced my Rustler 4x4 vxl shocks with the GTR shocks (XXL for rear, L for front) and used the shock oil that came with them.
I was popping the caps off the stock shocks - the GTR are a huge...

Before drilling the head of a screw that is in plastic - try using a left handed drill bit. I have found these will bite into the screw head and backout the screw. Worst case is you use it to drill...

just added an X-MAXX to my 2 E-Revo 2.0's and Rustler VXL 4x4

also have an old MGT 4.6 nitro truck and 2 proboat sonicwake boats

my servo failed after just 2 packs of batteries. The servo motor would spin but no steering. Fortunately it happened at very slow speed. Traxxas support was good, they are sending out a...