Search:

Type: Posts; User: Jeff23spl

Search: Search took 0.01 seconds.

  1. make sens! i was looking at a used kit for 100$...

    make sens! i was looking at a used kit for 100$ but i will put that money somewhere else....probably axles...so i checked the mip xduties and it look strong.

    the race one you are talking about to...
  2. olds97_lss you answered my question, i didn't...

    olds97_lss you answered my question, i didn't tried it on a gripping surface yet, the rear drift so much on snow or on polished concrete surface that i was wondering if many use gyro stability...
  3. got my 150mm wheels with 17mm hex and what i...

    got my 150mm wheels with 17mm hex and what i though would be a conversion to 17mm hex but it was in fact a 17mm wide spacer for 12mm wheels :( i'm waiting for a new set of adapters...this time i took...
  4. Not sure i got them installed on the pede. It s a...

    Not sure i got them installed on the pede. It s a bit taller than oem traxxas
  5. https://www.dropbox.com/s/k9028ru69rgso5f/20200110...

    https://www.dropbox.com/s/k9028ru69rgso5f/20200110_230749.jpg?dl=0

    https://www.dropbox.com/s/83x55d8fxn9k9ul/20200110_230729.jpg?dl=0

    some pictures...
  6. thanks for the feedbacks! i like your...

    thanks for the feedbacks!

    i like your aluminium rollbar, is it more to help the cover when it flip or to add frame stiffness ?
    What is the green thing in top of it ?
  7. i understand! I retain the fact you also have an...

    i understand!
    I retain the fact you also have an outcast....my friend will be riding one against my pede....There will be a Kraton, and some other modded 1/10....This one of the reason i bough a...
  8. olds97_lss let us know if the arrma is better but...

    olds97_lss let us know if the arrma is better but i cannot find the Rds-on spec of both esc nor the switching frequency to compare efficiency.
    The arrma is larger so it may have a larger heatsink...
  9. nice pictures Briber! I read your other thread...

    nice pictures Briber!
    I read your other thread and noted about body stiffness with drywall tape...i will do it too!

    I like to mod everything i can so rc isn't different but at some point i ask...
  10. Briber, I should have said, i upgraded a...

    Briber, I should have said, i upgraded a brushless venelion to a stronger motor so i have some parts slightly better than a brushed pede already but i plan to upgrade the other when it fail...

    the...
  11. olds97_lss The problem with the blx185 is that...

    olds97_lss The problem with the blx185 is that it wont take 2s but just 3 to 6s....

    i don't know much about different brand but as an experienced electronic technician, when i was looking at...
  12. Conversion to brushless rcharlance 3660 3800kv motor and need new tires ???

    As the tittle say, i installed a rcharlance 3660 3800kv motor with a 4s 80A esc in my pede. It was originaly a vxl converted to brushes by last owner (he probably kept the velineon and put the titan...
  13. Replies
    10
    Views
    1,222

    goldedt 5000mah 50c not expensive and it fit. It...

    goldedt 5000mah 50c not expensive and it fit. It came with a velcro strap. you can buy the battery extender from traxxas or drill a slot for the goldedt velcro strap and use it instead of the...
  14. the thing is the front and rear axle spin at the...

    the thing is the front and rear axle spin at the same rpm if you have different tire size, one set will slow down the other. In the sand it won't be a problem because there isn't that much resistance...
  15. Replies
    4
    Views
    1,230

    i installed all the new hubs, knuckle and...

    i installed all the new hubs, knuckle and bearings...(differencial bearings take a bit of time...) some new bearing was a bit slack in the hub, i used blue locktite. after all that, my wheels was...
  16. Replies
    13
    Views
    5,131

    a good alternative to a noisy air compressor is...

    a good alternative to a noisy air compressor is an old compressor from a refrigerator connected to a portable air tank.
    i sourced parts from a local fridge repair shop and got them for 20$...
  17. is there just screws to open the back of a vXL...

    is there just screws to open the back of a vXL motor ? i would like to find a brushed one that could be serviced that easily just for fun.

    i just opened a 550 yesterday but there was metal...
  18. i,m also fairly new to this but what i...

    i,m also fairly new to this but what i experienced so far with a brushed motor is that you need to match your motor-battery and gear ratio for the type of use you are planning of doing. I personally...
  19. Replies
    4
    Views
    1,230

    which parts usually wear first

    i got my pede used and i noticed a lot more play in axles and steering than another one i compared with.

    I ordered some new parts to help it but i was curious to see which one are you usually...
  20. I searched a bit on each stampede manual and it...

    I searched a bit on each stampede manual and it seem the clutch gear 54T comes standard on each 4x4 models but brushed models should have a 9teeth pinion instead of my 11 so i ordered a 9teeths to...
  21. new to RC with much questions and wondering what is the stock spec of a Stampede 4x4

    A buddy of my and me each got a used Stampede 4x4, mine is red and he got a blue one....

    I'm new to all this but i know a little on mechanic and electronic so last weekend we were comparing our...
  22. Replies
    28
    Views
    4,095

    i'm i right to say 15 teeth would be a lot more...

    i'm i right to say 15 teeth would be a lot more than before ?

    2s with 3500kv = 25 900rpm x 11/54T = 5276 RPM at the shaft
    2s with 3300kv = 24 420rpm x 11/54T = 4975 and with 15/54 it would be...
Results 1 to 22 of 22