Search:

I thought the backslash kit was no longer available, or if not, where do you get it at?

There isn't a ton of compatibility between the electric 2wd and nitro 2wd. Everything from the front suspension to the transmission is different. Even the steering linkage is different.

If you...

Why don't they? Not trying to be dense here, just I get if you have an extra NiMH battery like you did lying around -- sure. But with the advantages of LiPos -- it seems to me like its well worth...

^^This because you don't want to buy springs for a different setup just to change them again.

What are you trying to do here? The 3s batteries that fit in the trays can be put in parallel and do just as good without modifications or the worry about not having a body. Also, the batteries are...

I mean if handling is what you are going for, then its more than just a LCG as you alluded to. Start with sway bars as they will have the biggest effect on your handling. Then if that's not enough,...

For carriers, the Traxxas ones are good and are most commonly installed. Aluminum arms however are typically only used for street or speedrun builds as heavy duty traxxas or RPM a arms are much more...

My gosh, which version of the X-maxx do you guys have? I've only had mine since December, but I've had numerous rough sessions with tons of high jumps and a couple at a cement skate park. My rear...

The 4tec2.0 frame has a inner hole for more extreme steering angles - I think you have to drill it out though. The only thing I don't like about the 4tec platform is that it doesn't give much room...

I haven't built a drifter (yet) but I have researched it quite a bit. You will probably have a much easier time of drifting if you use the 4x4 platform, although I am told that a 2wd will give...

I don't know the exact answer to your question, but I would seriously doubt it. There aren't a ton of aftermarket parts for the Nitro Rustler these days outside of the aluminum stuff on Integy. I...

Remove the motor (pull ESC out, unscrew motor cover and motor). Once you have it disconnected, roll the chassis on the ground and listen for any sounds. IF it does not have a jerky motion and rolls...

Do you hear it when you have it on the ground and roll it by hand back and forth?

Yep each to their own preference for sure. Cheers.


It is indeed.

Nah, the center diff only makes it harder to wheelie if you put lighter diff oil in it. The stock 50k oil allows you to wheelie on command. You of course can go thicker and get even more wheelie...

No but low viscosity oil in a center diff will :)

I had a similar issue when I first got my merv. The smaller motor cogging is more pronounced than in a larger 1/10th scale sensorless. Cogging isn't really an issue at all, but in the merv vxl...

Ok, so I figured it out.

https://i.imgur.com/LhTwpw3.jpg

With my other vehicles, the standard (center four above) gauges work fine. On the X-Maxx, the voltage does not (as mentioned in the...

I have the Outerwears brand for my Slash 4x4 and love it - no heat issues. Some dust still gets in, but it keeps the mud, rocks, and grass out.

I don't have one on my X-maxx for a number of...

Thanks guys. I’ll try that later and report back how it goes.. just weird it’s different than other rides.

Yeah it has to be user error or a bug. It works fine for my other trucks though.

Already did the uninstall, reinstall thing - no dice. Here is what the settings are for that gauge:
...

Bought a new Xmaxx recently and it looks like the voltage telemetry gives readings within the app, but only 6v - I would expect much higher then that to be shown given 8s lipo power and all.
...

I agree, the reason you'd pay for these are not because they are cost effective, but because they prevent the effort of having to change out the part - which can ruin the day if lets say you damage...

Thank you!

+1 on the HR carriers, they were a great addition to mine.