Search:

Type: Posts; User: 222

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Thread: Springs

    by 222
    Replies
    2
    Views
    20

    The black springs are the hardest spring rate...

    The black springs are the hardest spring rate made for the 1/16th line. You can try some heavier shock oil, but be careful not to go too high of weight on the shock oil as I will end up popping the...
  2. Replies
    10
    Views
    135

    Donít think the esc will recognize them as said...

    Donít think the esc will recognize them as said voltage is higher then regular lipo battery. You might have to find an aftermarket esc that supports use of the LIVH batteries. I donít see where...
  3. Thread: XL-5 ESC Issues

    by 222
    Replies
    5
    Views
    99

    Have you tried turning on the esc release button...

    Have you tried turning on the esc release button and then press button again for 10 sec. Also check your throttle trim and make sure itís at zero. If nothing else call traxxas support and ask them...
  4. Replies
    11
    Views
    232

    Part replacement help

    Amen to the post above. He may have found the issue. If the issue above isnít the issue youíre having then also check the driveshaft and make sure itís put on correctly. The outer one is marked as...
  5. Thread: What's it worth?

    by 222
    Replies
    6
    Views
    99

    What's it worth?

    Is it new with warranty? If not itís like buying a car, when you drive it of the lot you take a loss. Sorry to say. You might could put them on eBay and sell them for what you want. Itís a gamble...
  6. Thread: Is this okay?

    by 222
    Replies
    6
    Views
    127

    Youíll need to find a good 2s battery for the...

    Youíll need to find a good 2s battery for the current esc you are using. The XL5 is rated for 2s Max. Your 3s battery wonít work with the current electronics. Youíll need a new motor and esc If...
  7. Replies
    4
    Views
    102

    Or the servo is stripped in one small spot and...

    Or the servo is stripped in one small spot and causing the shift to not engage all the way.
  8. This is just an open forum. Traxxas wonít...

    This is just an open forum. Traxxas wonít contact you most likely by just posting you want them to call you. Youíll need to pick the phone up and call them as said in above post. But coming here...
  9. Replies
    11
    Views
    314

    On 2s the 19t should be fine as long as you...

    On 2s the 19t should be fine as long as you monitor the temps.
  10. Thread: Thermal Shutdown

    by 222
    Replies
    7
    Views
    130

    How hot is it?? I believe itís around 170...

    How hot is it?? I believe itís around 170 degrees Fahrenheit. Hotter then you want to try to hold your fingers on. Getting even a little cheap temp gun can help you verify temps, and not just...
  11. Replies
    16
    Views
    231

    You donít want to put 7.4v into the receiver. You...

    You donít want to put 7.4v into the receiver. You want to make an RX bypass harness, and only send power (7.4v), to the servo. Either search here on the forums or google how to make an RX bypass...
  12. Thread: heat

    by 222
    Replies
    3
    Views
    71

    Have you checked your gear mesh? It may be too...

    Have you checked your gear mesh? It may be too tight.
  13. Thread: Thermal Shutdown

    by 222
    Replies
    7
    Views
    130

    Just let it cool down. Get yourself a temp gun to...

    Just let it cool down. Get yourself a temp gun to monitor the temps as well. You may want to make sure that you donít have any issues with the vehicle as well. That is if you suspect there is a an...
  14. I donít see that option for the stock esc in the...

    I donít see that option for the stock esc in the traxxas app. An aftermarket ESC can vine you this function. I know the castle creations ESCís have this capability. You may not want to hear this,...
  15. I would think gearing down and not up would...

    I would think gearing down and not up would possibly help with the rotation in the air. You would want more torque, not speed I would think anyhow.
  16. Replies
    5
    Views
    88

    Try AMain hobbies. They carry traxxas stuff.

    Try AMain hobbies. They carry traxxas stuff.
  17. Replies
    33
    Views
    748

    I would go to SMC website. They have quality...

    I would go to SMC website. They have quality batteries and they have some chargers as well, comparable to the price you posted. There are some that have more MAH, and cost less, and they also have...
  18. Replies
    33
    Views
    748

    I would rather buy new and gets the parts I want...

    I would rather buy new and gets the parts I want to upgrade it with. Also donít have to worry about getting someone elseís problems. As for batteries, do yourself a favor and buy new ones yourself....
  19. I use dry lube on my vehicles. This is after I...

    I use dry lube on my vehicles. This is after I clean it well with alcohol and an air compressor. After cleaning it, I spray every part with dry lube. Bearings, screws, and any other moving part...
  20. 20/54 is probably a good start. What axles you...

    20/54 is probably a good start. What axles you have? The stock plastic ones may not last very long with that motor/esc combo. I suggest some MIP axles. As for batteries, 3s minimum, but most...
  21. Replies
    9
    Views
    295

    Good deal. Glad you were able to get it working.

    Good deal. Glad you were able to get it working.
  22. Replies
    9
    Views
    295

    Make sure that where you are running doesnít have...

    Make sure that where you are running doesnít have a bunch of electric garage doors and/or someone using a device that interferes with your signal from TX to RX. So if changing batteries doesnít...
  23. Replies
    6
    Views
    335

    I wonder if this is part of the reason traxxas...

    I wonder if this is part of the reason traxxas pushed out the update for the esc which disables the on/off switch. Will be interesting what traxxas says. Hopefully they get it sorted for you. Good...
  24. Thread: Battery fitment ?

    by 222
    Replies
    2
    Views
    90

    You can slip the wires through the battery vent...

    You can slip the wires through the battery vent openings either through the front or rear ones. I run mine through the rear vent opening. Works well for my batteries that the wires exit through the...
  25. Replies
    4
    Views
    123

    If you push forward on your transmitters trigger...

    If you push forward on your transmitters trigger that is your brake. When the truck reaches a stop it will then go into reverse. You can also set the esc up to have no reverse. But the way it...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4