Search:

Type: Posts; User: olds97_lss

Page 1 of 20 1 2 3 4

Search: Search took 0.30 seconds.

  1. Replies
    1
    Views
    83

    If it's an erevo transmission/internals, it's a...

    If it's an erevo transmission/internals, it's a single speed and you shouldn't have to lock anything in it.
  2. Replies
    12
    Views
    207

    I run the hot racing 12->17mm adapters on mine...

    I run the hot racing 12->17mm adapters on mine with MIP X-Duties. I think they try and make the stubs a bit stronger by keying the axle vs putting a hole in it. I've been running mine pretty hard for...
  3. Replies
    5
    Views
    102

    I run HRB 5000mah 50C 3S in my 2.0. I use a...

    I run HRB 5000mah 50C 3S in my 2.0. I use a dynamite 4x100w ac/dc charger to charge them. It seems to do a good job. I have heard that the power switch tends to break in it, but I run mine off a...
  4. Is it cold where your running? Are you running...

    Is it cold where your running? Are you running stock tires?

    I run mine pretty hard and I'm surprised at how well it holds up. I've busted 1 or 2 stock axle carriers last season, but was usually on...
  5. What tires are those? If your axle is popping...

    What tires are those?

    If your axle is popping out like that, your flexing/bending the arms so far that it's pulling the bone out of the cup. I have had that happen quite a bit on my outcast 6s...
  6. Replies
    7
    Views
    196

    I know some run LT's for bashing, but I've always...

    I know some run LT's for bashing, but I've always run P2's with VDK pistons #2 with various springs/oils on my revos.

    Currently running this on my ERBEv2 and I bash pretty hard:
    P2 rockers
    70w...
  7. Replies
    24
    Views
    1,054

    It shouldn't affect speed, just stability.

    It shouldn't affect speed, just stability.
  8. Replies
    8
    Views
    543

    I run it as a single servo....

    I run it as a single servo.
    http://gmarquee98.x10host.com/myPics/98gmarquee/erbe/2019-1207-ERBEv2-max6-Top.jpg

    I have a cap pack sitting in the other servo spot. I added that to help the MMv1 esc...
  9. Replies
    23
    Views
    418

    Got a link to the "high performance brake"? I...

    Got a link to the "high performance brake"?

    I run dynamite max life 2 shoe in my 21TM revo. Slips less than the stock clutch or MIP clutch. I moved the transmission in my BB revo so I could fit a...
  10. Replies
    5
    Views
    169

    Like these?...

    Like these?
    https://hot-racing.com/?partnumber=RSYEX10X;c=170

    HR also had some for their savage hex adapters, but I'm not finding those specifically. They appear to be a bit smaller OD:...
  11. Replies
    21
    Views
    618

    To be honest, if the traxxas 3.8 chevrons...

    To be honest, if the traxxas 3.8 chevrons sidewall held up as well as my trenchers, all I would run would be the chevrons. I like the lack of side bite and the longevity of the tread.
  12. Replies
    21
    Views
    618

    The downside with a firmer tire is less grip,...

    The downside with a firmer tire is less grip, especially when it's cooler out.

    I used to run traxxas chevrons all the time, but they are useless when it's cold. Even when at 70F, they don't get a...
  13. Replies
    23
    Views
    418

    You would probably like the outcast backflip or...

    You would probably like the outcast backflip or backflip LP's. The LP's are smaller OD, so less cushion, but a pretty aggressive tread pattern. Both are pretty light.

    Backflips are 12.5oz,...
  14. Replies
    21
    Views
    618

    Well, you could try wrapping them so they don't...

    Well, you could try wrapping them so they don't balloon. I do that on my 6S trucks. Keeps them from blowing apart or blowing off the rim. It cuts down the air control quite a bit, but I'd rather have...
  15. Replies
    23
    Views
    418

    The engine brace is more for supporting the...

    The engine brace is more for supporting the heavier engine. Even with a 2.5R, it's not a bad idea as the engine area flexes quite a bit if you push on the engine with your hand. Over time, the...
  16. Replies
    4
    Views
    187

    Wrap them with kevlar cord. Keeps them from...

    Wrap them with kevlar cord. Keeps them from ballooning and exploding or pulling off the bead. I use a 500lb version of this:
    https://www.amazon.com/emma-kites-Braided-Creative-Projects/dp/B01850OSRW...
  17. Replies
    23
    Views
    418

    THS used to offer 2 pipes, one for bottom end and...

    THS used to offer 2 pipes, one for bottom end and one for mid-top end. The bottom end one was nice, it's what I run on one of mine. Still wasn't enough and ended up with a 21TM engine in it.

    I...
  18. Replies
    21
    Views
    618

    I've noticed that with the buggy style bead that...

    I've noticed that with the buggy style bead that traxxas uses. That kind of bead with the raised channel inside and the thin sidewall adds up to tires that cut themselves whenever you land or corner...
  19. Replies
    5
    Views
    146

    I run a similar setup but with P2 rockers/rods...

    I run a similar setup but with P2 rockers/rods and 60wt. Once you get up over 70wt with vdk #2, the pistons in the shocks snap/buckle.

    I run the same on my ERBEv2 but with RC Raven springs. I...
  20. Replies
    18
    Views
    389

    Well, hopefully the issue is the engine and not...

    Well, hopefully the issue is the engine and not you, or your going to waste $300.

    My 21TM took a while to break in, temps ran a bit high after about the first half gallon. The tune was a bit fussy...
  21. Replies
    2
    Views
    149

    Could also be your losing power to the front...

    Could also be your losing power to the front wheels. I know when my center diff was low, that's kind of how it felt. I had taken it apart and filled, it, but apparently not enough. Kind of tough...
  22. Replies
    7
    Views
    208

    Kind of surprised it took them this long to make...

    Kind of surprised it took them this long to make something between the MMv2/MMX and XXL. Looks similar in size to the max6 but priced like the max5. Guessing it would work well in the XMAXX.
  23. Replies
    18
    Views
    389

    That's what it looked like when you took the plug...

    That's what it looked like when you took the plug out? You didn't stick something in there and pull the coil out like that?

    Are you putting the copper washer on the plug before installing it?
    ...
  24. Replies
    7
    Views
    274

    After running a 6S brushless MT... even my big...

    After running a 6S brushless MT... even my big block revo seems "tame". lol

    I started running electric for a couple reasons. I wanted something to run in the winter/snow/cold, nitro's aren't the...
  25. Replies
    7
    Views
    274

    I have the 18TM as well. It has many gallons...

    I have the 18TM as well. It has many gallons through it. Still performed better for me than the 3.3 that came in my truck or the new one I installed. I've never had the best luck with traxxas engines...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4