Search:

it seems too low to have just the push rod bent
it looks like you don't have shock absorbers
the push rod is bent a little ..... take a soft hammer and it will be as before

Inviato dal mio...

Hello guys
Has anyone of you ever tried to adapt the Erevo 1 body while keeping the 2.0 closure?
2.0 bodies cost a fortune

Inviato dal mio SM-A310F utilizzando Tapatalk

I've always known that smaller wheels equate to less speed

Inviato dal mio SM-A310F utilizzando Tapatalk

after the Esc and receiver update, the button no longer turns off Erevo but the batteries must be disconnected
why did Traxxas decide this?

Inviato dal mio SM-A310F utilizzando Tapatalk

nice and cheap ..... which ports need connection?

Inviato dal mio SM-A310F utilizzando Tapatalk

which leds did you mount?

Inviato dal mio SM-A310F utilizzando Tapatalk

let us know how they work

Inviato dal mio SM-A310F utilizzando Tapatalk

the limiting straps placed through the rear frame support do not exclude the push rods from coming out
I tried both 80mm and 90mm but the problem remains
try the olds97 method or glue small pieces...

does a metal drive shaft solve the problem?

Inviato dal mio SM-A310F utilizzando Tapatalk

the limiting straps protect the shock absorbers but not the push rods
I also tested the 80mm ones but my rod ends have come out twice on two new push rods
I must say that the problem occurs on...

I understand now that we are talking about shock absorber rod ends and not push rods

can you tell me with a link what are the rod ends you use?

Inviato dal mio SM-A310F utilizzando Tapatalk

I tried with hot glue but it tends to come off
so I wrapped the cable with self-agglomerating tape
then at the base I put a silicone paste / glue (Loctite kintsuglue)

Inviato dal mio SM-A310F...

Hi Guys!
How can I solve the damage of the motor sheath?
the right size heat shrink tubing does not pass through the connectors
other...

take into account that the limiting straps will stretch slightly
my 90 mm have become around 95 and no longer limit
now I have mounted the 80mm

Inviato dal mio SM-A310F utilizzando Tapatalk

in channel setup the accelerator must be at 120%

Inviato dal mio SM-A310F utilizzando Tapatalk

sorry for the question!
are these rod ends for the shock absorber?
aluminum rod end for push rod nobody produces them?

Inviato dal mio SM-A310F utilizzando Tapatalk

I noticed that he uses 100 straps but with that spacer those straps get much shorter enough to be shorter than 90
my 90 limiters do not stop the arms before the maximum extension
do you think my...

however in my opinion the 90mm do not limit
note that in this video he needs a spacer
https://youtu.be/MJOgcxF_D4w
so why not put the 80mm ones?

Inviato dal mio SM-A310F utilizzando Tapatalk

I think the limiting straps avoid fractures to the shock,rockers and upper rod ends but not the lower rod ends

Inviato dal mio SM-A310F utilizzando Tapatalk

yesterday in a jump with bad landing both low rear rod ends came out
I have the limiting belts with length 90 that pass through the blue aluminum bracket and I had inserted the push rods in the...

sorry ..... but what is the purpose of the central differential if I can put a fixed shaft?

Inviato dal mio SM-A310F utilizzando Tapatalk

can you put a video with Tsm on and off?

Inviato dal mio SM-A310F utilizzando Tapatalk

what exactly do you want to know?
if it is possible to do it from the application?
yes ..... and it's very easy

Inviato dal mio SM-A310F utilizzando Tapatalk

please Traxxas fix this problem
Yesterday with the monster launched at 70 km the application has searched for the update
the transmitter stopped working and the clash with a wall was inevitable
I...