E-Maxx Gallery - Show off your Maxx here!

**Popoxx** · 08-11-2007, 09:07 AM

Hi everybody I'm a French E-Maxx owner and below this is some pics of this one. I tried since several years to transform my E-Maxx in an unbreakable MT. And I think I succeeded!. All the parts of my E-Maxx play a role, so if I decided to have some parts in plastic it's normal! And the system for the shock towers is the best (and very cheap moreover): they are very flexible and the system allows to protect the body.
The next step is the purchase of a BL system with aluminium tranny case and gears.
As we say in France: "à plus!" (good bye), and if you have any questions no problem!

http://www.hiboox.com/lang-fr/diapor...eowom58989aayu

**Popoxx** · 08-11-2007, 10:17 AM

It's me again but with the pictures without link, it's more agreeable!

**solardragon** · 08-17-2007, 09:06 PM

my 72 chevy
[IMG]

[/IMG]

**solardragon** · 08-18-2007, 12:53 AM

[IMG]

[/IMG]

**rojna** · 08-18-2007, 10:19 PM

Some pics of my e-maxx project

Painting a wrangler body, waiting for the Badlands tires ... and hopefully Tekin will soon relese there MT BL system

**chaman** · 08-19-2007, 12:45 AM

Heres mine. Only thing stock is the chassis...but will be gone soon too...!

http://i11.photobucket.com/albums/a1...2/000_0130.jpg
http://i11.photobucket.com/albums/a1...2/000_0119.jpg
http://i11.photobucket.com/albums/a1...2/000_0118.jpg
http://i11.photobucket.com/albums/a1...2/000_0128.jpg

Almost daylight pics!!!

**bagged92sdime** · 08-23-2007, 02:42 PM

My Monster Maxx Crawler...

MODS: Traxxas Black Coil Dual Rate Shocks, 72t Robinson Racing Spur Gear, 9t Robinson Racing Pinion Gear, single motor mod, Hitec 645mg Steering Servo up front, HPI Jeep Rubicon Body, Proline Moab 40 Series Tires, custom Built 4-linked Chassis, Integy Billet Front and Rear Bulkheads, Fast Lane MFG Wide Maxx Billet A-Arms, Locked Out A-Arms, Axial Black 40-Series Beadlocks, polished integy front and rear gearbox's with polished collars, steel CVD's, lunsford titanium hinge pins, 4500mah battery packs,

COMING SOON: Aluminum Tranny case, Steel tranny gears, 2 Integy 75t Lathe motor, and maybe 2 shocks per corner

http://i4.photobucket.com/albums/y12...e/CIMG1598.jpg

Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo

**nrpalmer32** · 08-25-2007, 03:33 PM

Here's the most updated pics, hope you like if ya got any questions just private message me, hope you guys like!

**CustomRider** · 08-31-2007, 10:17 PM

pics of my updated E-MAXX:

**EASTCOTT** · 09-06-2007, 10:00 PM

http://i105.photobucket.com/albums/m...Picture014.jpg

http://i105.photobucket.com/albums/m...Picture012.jpg

http://i105.photobucket.com/albums/m...Picture013.jpg

http://i105.photobucket.com/albums/m...Picture008.jpg

**Yonderwheels** · 09-19-2007, 07:26 PM

This is my racing E-Maxx. I am trying to get it ready to go brushless and I am pretty much there.

It has:
RPM Shock Towers
RPM A-Arms
RPM Bulkhead Braces
RDLogics CVD's
RC-Monster Center Dogbones
RC-Monster Steel Idlers X2
FLM Aluminum Diff Cups
Integy 23mm H-Pattern Wheels/Tires
Traxxas Big Bore Shocks (also have a set of PowerStrokes which would look nice with this body)
Integy Blue Springs
RC-Raven Dual Rate Springs
Blue Bird 630MG Servo (Steering)
Futaba Servo (Shifting)
Some TRX 3.3 Parts
Traxxas Heat Sink Motor Plate
Dean's Connectors

**madwelder44b** · 09-20-2007, 01:49 PM

Integy Aluminum A-Arms, Bulks, Bulk braces, Shocks, Shock towers, 3.3 knuckles. THS 3.3 Axles. Alum. turnbuckles, RPM wheels and wear plates. Hot Bodies Deathgrip tires, Dual Steering Servos, T-MAXX alum. Chassis, And Bronco Body. Everything else remains stock eyesores for now.

**RCguy12** · 09-24-2007, 08:34 PM

pic of mine

**MaxxBasher!!!** · 10-02-2007, 10:19 AM

**macr0w** · 10-02-2007, 10:32 AM

New pics. I've already put these in another thread.

http://i177.photobucket.com/albums/w...ewTires036.jpg
http://i177.photobucket.com/albums/w...ewTires035.jpg
http://i177.photobucket.com/albums/w...ewTires004.jpg
http://i177.photobucket.com/albums/w...ewTires033.jpg
http://i177.photobucket.com/albums/w...ewTires028.jpg
http://i177.photobucket.com/albums/w...ewTires041.jpg

Edited for image size. Please keep all images @ or below 640x480. -cooleo

**richi59** · 10-06-2007, 09:02 PM

http://i242.photobucket.com/albums/f...9/IMG_0151.jpg

Edited for image size. Please keep all images @ or below 640x480. -cooleo

**69Malibu** · 10-09-2007, 11:30 PM

Here is my Novak 6.5 Maxx:

**hayes** · 10-12-2007, 10:35 PM

bamm!!!
http://s243.photobucket.com/albums/f...t=PIC_0233.jpg

**bmcswusnavy** · 10-27-2007, 01:41 PM

We had to retire the Grave Digger Body after we got Dennis Anderson's autograph so Mini-Me opted for a Harley themed Bronco!

**frogy** · 11-09-2007, 07:29 AM

Here is my rebuilding of the E-Maxx
1st step replacing the battery. So they are more in the middle and i have lower weight in the center as well + the chassis is stronger with that two aluminium parts. frogy

just wait for some parts / ALU then i will continue.
Done an extra tread now, may thats better and when its finished i post it here.

**frogy** · 11-17-2007, 07:18 AM

Here we go, frogy s E-Maxx, not complete ready but looks better than stripped off..... need to adjust everything and some small changes will be done as well soon

frogy

**UNSLOW** · 11-21-2007, 10:50 PM

My V-Twin

**bowtiefred37** · 11-22-2007, 10:22 PM

Sorry about that.

**brushlessman** · 11-28-2007, 10:57 PM

**huskersforever** · 12-01-2007, 06:17 PM

Here are the pics of my E-maxx and My T-maxx

Here is a pic of just my E-maxx

**DMAXX2007** · 12-08-2007, 12:01 PM

MY NEW EMAXX

http://i31.photobucket.com/albums/c3...5/PA280575.jpg
http://i31.photobucket.com/albums/c3...5/PB030584.jpg

Edited due to image size. Keep posted images 640x480 pixels or smaller. - razer

**eemmaaxxxx** · 12-12-2007, 02:54 PM

New Winter bash set up: Proline Desert Rat, Badlands and PL velocity dish wheels.

**CandyRedJato3.3** · 12-18-2007, 02:48 PM

Looks like I am the 2nd one with pics up so far.

**HappyJack** · 12-23-2007, 07:34 PM

I haven't done a whole lot yet, But it is gonna happen, I have put a hitec servo in it and the new tires.

**ChuckDeez** · 12-24-2007, 04:35 PM

**Andrew32** · 12-24-2007, 07:59 PM

more mudd runs

**Popoxx** · 12-25-2007, 06:42 PM

Here are the first pics of my New E-Maxx and the list of my upgrades !

Fastlane Machine :
 Rear Bulkhead
 Front Bulkhead

GPM Racing :
 Alloy Front Skid Plate (couleur bleu) - TMX1331F
 Alloy Rear Skid Plate (couleur bleu) - TMX1331R
 Alu Front Bulkhead Cross Brace (couleur bleu) - TMX1012A
 Alu Rear Bulkhead Cross Brace (couleur bleu) - TMX1013A

Integy :
 Super HD Front Lower Arm for T-Maxx 3.3 - T3678BLUE
 Super HD Rear Lower Arm for T-Maxx 3.3 - T3679BLUE
 Alloy Body Post for T-Maxx 3.3 - T3703SILVER
 Progressive 40 pcs Spring Set for T-Maxx - C22297PRO

Traxxas :
 Gear Cover Single Motor Installation - 3977X (soon)
 Motor Plate Single Motor Installation - 3997X (soon)
 Shock Shafts Titanium XX-Long 2.5 - 2656T
 Hex Wheel Hub Aluminium T-Maxx - 4954X
 Shocks Big Bore T-Maxx – 4962
 Button Head Hex Screw 3x18 Jato (6) – 2583
 Tire 3.2" T-Maxx (2) – 4970
 Wheel Satin Finish T-Maxx (2) - 4972

Novak : HV High-Voltage Brushless System 6.5 – 3020 (soon)

Lunsford Racing : Titanium Hinge Pin Kit T-Maxx 2.5 - 3801

Mugen Seiki : Shock Oil #400 weight - B0316

RPM : Bumper Front Black T/E-Maxx - 80102

FullforceRC : Maxx Shock Boots 4-1/4” Long - FF018

Speed Mind :
 3x8mm Titan. Countersink, Hex-Socket Screws - #JC308
 3x10mm Titan. Countersink, Hex-Socket Screws - #JC310
 3x12mm Titan. Countersink, Hex-Socket Screws - #JC312
 3x15mm Titan. Countersink, Hex-Socket Screws - #JC315
 3x8mm Titan. Button Head, Hex-Socket Screws - #JR308
 3x12mm Titan. Button Head, Hex-Socket Screws - #JR312
 3x15mm Titan. Button Head, Hex-Socket Screws - #JR315

Next step : brushless !!

**markmn123** · 12-26-2007, 11:20 PM

My e-maxx....dual novak brushless 4.5

Only problem its kinda heavy but i still have the ability to wheely or just burn out and has a nice long runtime on 3200 li-pos...thats 4-cell lipos..if anyones interested feel free to ask ?'s and i can repost...im working on videos! you need to see this thing in action.

**HappyJack** · 12-28-2007, 11:12 PM

What I did this holliday

First try could have been better

**Just go Play** · 01-01-2008, 07:00 PM

Emaxx with Novak 6.5

And with the dual Velineon motors

**ChuckDeez** · 01-02-2008, 05:15 PM

**staMaXXede** · 01-03-2008, 02:24 AM

http://i71.photobucket.com/albums/i1...7/HPIM0244.jpg
http://i71.photobucket.com/albums/i1...7/HPIM0243.jpg
http://i71.photobucket.com/albums/i1...7/HPIM0242.jpg

**CandyRedJato3.3** · 01-09-2008, 08:54 AM

Here is a few newer pics.
Got some new upgrades. New Ford F-250 body for a Revo 3.3
Got nice new Traxxas Big Bore shocks. FLM bulkheads, I have only installed the rears so far. And got some new wheels and tires coming in the mail...

**Alfo** · 01-13-2008, 05:15 AM

Here is my Rolexmaxx! (Rolex name came out after I realized how much I've spent on it!)
This has been built up from a std. old e-maxx focused on weight and racing reliability. Every single important part to avoid breaking during racing has been upgraded to aluminum or titanium, eveything else (unuseful fancy staff) is still plastic. It is running a Plettenberg Maxximum motor with Schulze 18.97 esc and 2 set of 4000 30C Lipo batteries wired in series. The batteries are now placed under the frame to even lower GC. An Hitec massive robot servo (66 lbs!!!!!) is granting me the right steering power under very heavy load. The total weight with lipo's and body is 10,14 lbs so pretty much as it used to be as a stock e-maxx.

**emaxx0301** · 01-13-2008, 11:51 AM

http://i97.photobucket.com/albums/l2...7/100_0411.jpg

Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo

Thread: E-Maxx Gallery - Show off your Maxx here!

Thread Tools

Display

my Monster Maxx

My E Maxx In Road Maxx Mode

my e-maxx

Harley E-Maxx

A V-Twin

My Emaxx

This is my emaxx

My E-maxx

My new body

Posting Permissions