T/S-Maxx Gallery

[jason draughn]

used to be a classic maxx, i think

[westoakmech]

Here is my old 2.5 rescue maxx. It was a gonna be thrown in the thrash. New p/s, servos, hump pack, driveshafts, 2.4 radio, and body. Just like new


sent from my not so smart, smart phone

[westoakmech]

And here is my 3.3 max, dirty as usual



sent from my not so smart, smart phone

[amylly]

Here's my 1999 T-Maxx - one of the first off the line, still has original engine, original piston and sleeve - haven't run too many tanks through it, but they've been hard ones!

Was in pieces on my basement desk for six years after my daughter was born - just finished completely rebuilding it - stripped it down to the last screw and completely cleaned and reassembled, put on a bunch of aftermarket parts I had saved up. Now just gotta fire it up again! (but not sure if I want to get it dirty)

https://www.box.com/s/3vjlm50ctdge3xv8m7qh

[Big_Chika]

My newly widened pro.15 maxx. Used RPM and 3.3 parts.

[X_Spurt]

This is my T-MAXX that I took from stock to better-than-stock.

I upgraded to the Revo wheels and Talon tires, Big bore shocks and spring set, covered with socks.

I suffered a broken bulkhead so, the plastic stock bulkhead was replaced with an aluminum one. I also replaced the skid plates and bumpers to the anodized green aluminum. RPM arms all around.

I was disapointed too many times by a dead EZ START battery, so I pulled out the system and went to pull start. New green fuel lines and dual 2075 servos complete under the hood upgrades.

Topped the body with a HPI Jeep Rubicon body in Candy Orange and gave the wheels some orange color to match. There's a trail of green glitter in the paint to make the image of flames on the good and side panels.

[Newfoundland]

[IMG][/IMG]

[Newfoundland]

[Rubberman04]

Here is my tmaxx after rebuilding it off and on for a year. I bought it from my neighbor for $50 and adding my 2.5, replacing broken or wrong parts and just fixin her up.

[Big_Chika]

New pic with black painted wheels.

[Fishstickz]

[mnewbolds]

[Fishstickz]

Instead of looking through the 28 pages I just took a decent picture from each post to make a clip of your babies! I could only copy pictures that where on the site, if it was linked I dont have your truck included sry.

[LeadFootedRacer]

First one is mine, second one is my fiance's, and the third one is my custom short course maxx, more pics can be seen in my build thread.

[Supermaxx361]

Heres mine! more bolted on than i care to list or try to figure out what it cost lol

[Leviathan560]

i got a Traxxas S-Maxx TRX 2.5 and here is my last year picture video and here is the remake picture video and yes it was last year and enjoy

[nathan8856]

here is an action shot of my tmaxx .15 it had been sitting for 10 years after my dad broke it in! so we cleaned it up and replaced the necessary stuff and here it is running like a champ! i recently purchased a trx 3.3 a ofna pico .26 another trx .15 metal bumpers metal skid-plates .15 transmission 3.3 transmission new tires with black rims new servos new shocks new shock covers ez start system new remote and receiver new buggy tank and buggy tires all for 65$ on craigslist witch should i install pico .26 or trx 3.3? . here is the tmaxx
and more
http://s1340.photobucket.com/user/na...ibrary/?page=1

[/IMG


black rims painted theme myself


this truck was sitting for 10 years after my dad bought it and barley broke it in (3/4 of a quart through it) so i found it in the garage and knew i had to drive it i have invested about 100$ in total 40$ for gas and glow plug and 65$ for the bumpers skidplates 3 engines (trx3.3 ofna .26 trx.15) and many other parts my body is cracked from a crazy jump but havent broke anything else other then a couple spur gears and a pull-start really enjoying this as a hobby


sorry im a noob and having trouble posting pics so once again here are the pics http://s1340.photobucket.com/user/na...ibrary/?page=1

[Ckeithnitro]

[Fishstickz]

This is a 4910 with a TRX 3.3 & tuned pipe, robinson spur gear, OFNA Violator Fuel Tank, TQi 2.4Ghz, K&N type Air Filter, E-maxx Driveline, Diffs, Axles, Knuckles,Aluminum shocks with Progressive Rate Shock Springs, RPM Maxx Titan Offset Blue Rims, TEKNO RC Adjustable Wing Mount, RPM skids & bumpers. still have servos and the hump pack on the to buy list. Bought the truck in may of 2012, added all aluminum hopups $500 worth and got schooled. I removed all the aluminum - the servo saver guard, everything listed above is new. Pretty much bought 3 trucks to get what i wanted. Plan to break the truck in hopefully this weekend.

[nathan8856]

i finally got the hang of posting picture so here is my tmaxx


the new bumpers (got rear and front) also added shock covers.



painted the rims myself

[B3nno8]

my 4907 maxx. rpm a arms, true track rear, rpm shock towers, rpm bulkhead braces, rpm bumpers, rpm front hubs, traxxas steel cvd's, hitec steering servo, ofna violator tank, hpi hump pack, revo wheels and tyres, 17mm hubs, slipper clutch mod, big bore shocks, integy progressive springs, savage shock socks, upgraded toe links and drag link, exhaust coupler.

trying to upload other pics but wont upload to image shack

[smp]

Here is the best shots of my Tmaxx. these were taken by fiance.

[rewstertmaxx]

[rewstertmaxx]

[/QUOTE]

thats sick!

[Maxxed out Throttle]

[B3nno8]

my novelty tyres haha

[kuskye25]

Tmaxx 4910:
-Traxxas center CVD's w/extended cups
-17mm hex's
-proline badlands tires on desperado 1/2" offset rims
-rpm a-arms all around
-rpm bumper
-aluminum engine mount
-GH aluminum bulks front and rear
-GH aluminum skids front and rear
-GH aluminum chassis braces
-GH aluminum center skid
-aluminum shock towers
-aluminum traxxas bigbores, 50w oil, integy springs
-upgraded chassis
-t-pro 946 165oz/in metal geared steering servo
-sprung body posts
-ofna 145cc violator fuel tank
-trx 3.3 with traxxas "R" dual chamber pipe, and high flow filter
-4909 3.3 steel geared "RR" transmission, FOC, rit dyed black, 2.5 brake disk inplace of three shoe pads for the slipper clutch
-e-maxx diffs, 50k front, 30k rear
-RCbest steel cva shafts in the rear
-prografix 4911x body
-body clip leashes
-cut holes in body and replaced with nylon screen
-turn down on exhaust tip
-shock covers
-direct pull throttle

[Snook Man]

[punkisdead]

Here's some pics of my mostly stock T-Maxx 3.3. Just finished painting up my first body ever.

[ThatEffindude]

Here is my Maxx http://i232.photobucket.com/albums/e...508_211259.jpg
http://i232.photobucket.com/albums/e...509_191759.jpg

Project is a work in progress. Many more upgrades to come.

[Deceev]

Here are a few pics of my Tmaxx, and a few of it in action.

[Tonda]

New wheels from proline F11's And original traxxas tires

[CBD55]

Here it is:

[vwdaveb]

Haven't broken in the motor since converting to 3.3 chassis ans motor.

[ncsu602]

Here's my 4907 Maxx

3.3, aftermarket filter, Traxxas Resonator, RPM arms, aluminum bumpers, aluminum servo protector, deep dish chrome wheels and brand new Proline Shockwaves that I haven't got to try out yet.

[Fast five nine]

I've had alot of trucks in the past 10 years

[slammed99s10]

heres an update on my tmaxx....aint been on here in forever....just ordered blue rpm bulkheads, bodybounts, bulkhead braces, and some misc other stuff this week to rebuild over the winter to be bashed while it still looks good...

[dudelittle]

[Solostunter]

Here is a video of my T-Maxx 2.5 it has a trailer hitch and light hook ups, I'm still working on the trailer lights!

[corey0721]