Results 1 to 5 of 5

Thread: Specktrum DX3

  1. #1
    RC Enthusiast
    Join Date
    Jul 2007
    Location
    South Africa
    Posts
    26

    Specktrum DX3

    How do I set up the fail safe on the DX3.

    And can I use a venom fail safe on this system

  2. #2
    RC Champion
    Join Date
    Jul 2007
    Location
    connecticut
    Posts
    1,092
    Quote Originally Posted by Heliguy
    How do I set up the fail safe on the DX3.

    And can I use a venom fail safe on this system
    it has its own failsafe you cant use the venom with it
    drive it like you stole it !!!!!

  3. #3
    RC Enthusiast
    Join Date
    Jul 2007
    Location
    South Africa
    Posts
    26
    thanks
    how do I set it up on the dx3

  4. #4
    RC Racer
    Join Date
    Aug 2007
    Location
    Lloydminster Alberta
    Posts
    137
    It show you how in the manual. Of you don't have one a PDF copy can be downloaded from there site.
    Revo 3.3, Bowtie MTR, 1972 C10 Chevy Long Box,

  5. #5
    RC Champion
    Join Date
    Sep 2007
    Location
    Campbellsville, Ky.
    Posts
    1,074
    This is how you set the Fail Safe

    To bind the receiver to the transmitter

    1. Make sure the transmitter and receiver are turned off Bind Button

    2. With the receiver off, press and hold the bind button on the receiver while turning on the receiver.

    3. Release the bind button when the LED lashes green.

    4. With the transmitter off, place the transmitter steering wheel, throttle trigger and auxiliary channels in their desired fail-safe positions (normally brake and straight- ahead steering).

    5. Press and hold the bind button on the transmitter while turning on
    the transmitter.

    6. Release the bind button after the green LED lashes.
    After several seconds the LED on the receiver and the LED on the transmitter will quit lashing and remain solid, indicating that the binding process was successful. Once binding is complete, the system will automatically connect.

    Hope this helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •