New Pics
![]()
Last edited by j-maxx5; 08-07-2009 at 11:38 AM.
Make 'em Cry!
Last edited by ksb51rl; 12-26-2009 at 10:14 PM.
RX8 E-Revo
WIDE Rustler VXL
Here's my Rustler. Also some mods for it include:
-Integy Aluminum Castor Blocks
-Integy Aluminum Front Bumper
-Integy Graphite\Aluminum Front Shock Tower
-Integy Graphite\Aluminum Rear Shock Tower
-Integy Super Motor Heatsink/Cooling Fan Silver (ships late August)
In the mail from RPM:
-RPM Rear A-arms (blue)
-RPM Front A-arms (blue)
-RPM Front Bearing Carriers
-RPM Rear Bearing Carriers
-RPM Wide Front Bumper (blue)
In the mail from *********:
-GT A-6-10 200W Balance Charger & Discharger
-16A 14v DC Power Supply
-***** ********* 5000mAh 3S1P 25C
Many more mods to come. Little short on cash now. It's a never ending project that I personally think will never end.![]()
Last edited by Divey1130; 08-10-2009 at 02:21 AM.
X3-RC8T/X2 ERBE/Losi SCTE/SC10 4x4/Baja 5SC/Rusty
Those who throw dirt are bound to lose ground.
Check out the mini 300c
![]()
here's my 90% FLM Rusty....only Traxxas parts on it are the front bearing carriers bell crank and top plate for the chassis...
![]()
Fluttershy is best pony.
New Upgrades for my speed Batler
![]()
EMBE/ Savage X
x2 BL slash
Ultra lx1e
Velineon System & slash big-bores arrive this week.
*RPM Rustler front & rear A-arms
*RPM bearing carriers & traxxas 5x11 bearings
*Rustler half-shafts & Rear shocks
*Hex hubs
*RPM front bumper
*wheelie bar
Traxxas 2.8 Bowties (borrowed from a Rustler)
![]()
I got nothin'
finally got some action shots![]()
![]()
![]()
![]()
Last edited by ksb51rl; 12-26-2009 at 10:13 PM.
RX8 E-Revo
WIDE Rustler VXL
![]()
jconcepts vxl high flow body
"You must first climb, to be at the top"
..........
[IMG][/IMG]
E-Maxx-Dual KD700HOs, 5s
(Rustler & SLASH too!)
I didn't realize I had never put up any pics of my Rustler in the gallery. Here is it's birth to what it is today.
Tape on the 3s didn't hold and the rubber ripped. Now I have gorilla tape.
Heading out on vacation...
New parts...
Everything
32P gears
![]()
****** out Rustler
Slash 4x4 gettin' close
here's a litle sneakpeak of my new body
it's not finisched yet still waiting on stencils for more airbrush work.
My wierd bandit monster. I don't have time to list all the random things I did to it right now.
[
With 32p gears
Next to its rustler bro
![]()
Free all none violent drug offenders!
Trav
my bandit w/ a slash bumper. it waterproof![]()
http://picasaweb.google.com/nigel.mc...VxlWaterproof#
Last edited by brushlessbandit; 09-19-2009 at 10:45 AM.
reverse tranny extended rustler/bandit thing on vxl and 2s lipo.
rtr slash 4x4
2s lipo
some other rc stuff
here's my Rusty w/a quad & TMaxx body.
![]()
My Roller will never be complete.
I haven't been on the forums for about a year so I just wanted to show off a few pictures. Nothing much updated except my own painted body (chipping on the wing) a little micro dt added to the family. Also testing out my new camera! doesnt work too well indoors though =( but when im outdoors and I can film HD video now. Looking forward to a few new videos when the rain and snow stops.
Posing with his brothers
Big daddy in the back
Standing Tall
Thanks glad to be back in RC's again too bad winters just ahead!
Classic Bandit, XL-5 Stampede, Micro-DT and Mini-t
![]()
![]()
![]()
![]()
pics. werent working b4 but i can post them correctly now![]()
Last edited by ksb51rl; 12-21-2009 at 11:30 PM.
I have jaco foams on one pic and taloons on the others. I don't always have the spoiler on as you can see.
Revo3.3
JamminX1
Jato2.5
RustlerVXL
LosiXXXs
one of the better pics of my car, i think![]()
![]()
Wide Rustler | "Bulldog" Backslash 4x4
Here she is. Blacked out and lowered, only an inch off the ground.
![]()
The biggest thing i've broken: My wallet.
My Roller will never be complete.
Hello i'm new to this board so didn't really knew what to post first so i'm gonna post some pics and vids of my rusty.
some pics:
my other vw body: Cartoonlike dragsterRusty
Proline VW Baja body, anaconda front tires, phaltline tires with tremor wheels, 17mm hex convertors and a proline wing for 1/8 buggy.
my basher:
ENJOY!
wanna be rustler
its actually a pede but i treat it as if its a rustler!
Here are some photos of my Rustler that I race at my local track. The Losi and Asscoiated guys think it's a joke until I run them down. It's very competitive even though it's a bit heavier than the "race" stadium trucks. The extra heft atcually helps with the brushless keeping it planted on the ground. What it really comes down to is track time and suspension tuning.
Parts list:
Rustler VXL
Factory Motor/Electronics
RPM rustler front arms
Traxxas Aluminum Front Castor Blocks
RPM front bearing carriers
Rear suspension: Proprietary set up
Big bore shocks
Front shocks: 30 weight no preload spacers
Rear shocks: Proprietary set up
Rear axles level, arms slightly below level
RPM Revolver wheels front offset on all four
Proline Holeshots all four, green compound
There are also a couple of proprietary "fixes" to various parts which really makes it competitve.
Last edited by CAK; 11-15-2009 at 10:23 PM.
Fly like a Butterfly Sting like a Bee
Last edited by ksb51rl; 11-29-2009 at 04:36 PM.
What can i say???![]()
Rustler XL-5,
WaterProof Slash XL-5
HPI MT2 g3.0
my Street Race Rustler when the bodypaint was still fine
![]()
monster.traxxas.com/showthread.php?t=494310
Here is my speed runner rusty
Its not "fully" finished in this pics, but its roughly done (needs some modding and tweaking here and there). Currently, its being powered by to spc 3s lipos in series, with a Neu-Castle/MMM combo.
![]()
EMBE/ Savage X
x2 BL slash
Ultra lx1e
My Rusty in the snow:
![]()
Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host.
I have changed the image(s) to link(s) and/or thumbnail(s) so that people don't have to scroll to read the thread. You can also upload thumbnails that can be selected to view the photo at the original resolution.
-ksb51rl
Last edited by ksb51rl; 12-21-2009 at 11:29 PM.
Rustler VXL + Slash 4X4 Ultimate = THE BEST
I just finished painting up this Pro-Line Crowd Pleazer 2.0. I couldn't get a really clear picture of Franky because of the glare from the lights.
I call the truck FrankenRustler because it started life as a Nitro Rustler but I converted it to a mid motor electric. It's setup strictly for asphalt oval racing. I don't plan to do any bashing at all.
Joe
![]()
Can't spell? Try this http://www.iespell.com/
Hi guys This is my Rustler, Hope you like it![]()
![]()
![]()
![]()
![]()
Here are some upgrades;![]()
RPM
Front Bumper
Front Shock Tower
Rear Shock Tower
Front Arms
Rear Arms
Front Hub Carriers
Rear Hub Carriers
Trans Gear Cover
Motor Guard
Traxxas
Bellcrank
Wheelie Bar
Wheelie Bar Tires
Esc Fan
Big Bore Shocks (in the mail)
STRC
Front bulkhead
Steel Lock-Nut Style Hinge-Pin Kit
Castor Blocks
Wheel Hex
Home made,Aluminum spoiler (black one installed)
Tires
Stock ones (Brand new) Black Chrome wheels
4 Anacondas with chrome wheels
Geolanders with HPI Spike Wheels
In the mail is a brand new body and the big bore shocks..So more Pics will come soon...
Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host.
I have changed the image(s) to link(s) and/or thumbnail(s) so that people don't have to scroll to read the thread. You can also upload thumbnails that can be selected to view the photo at the original resolution.
-ksb51rl
Last edited by ksb51rl; 12-24-2009 at 12:52 PM.
Rustler vxl & 1/16 Revo vxl proud Owner!