The NEW Stampede gallery - Post your pictures here!

[derfra]

This is my older stampede that I upgraded with electronics from a slash so it is waterproof, also it has a set of tire chains I made to add traction in the snow.


[IMG][/IMG]



[IMG][/IMG]

[bullfrog70152]

My son and I first project. Pede with the Tango bodies. Steady upgradeing parts.To bad to say after 1 week they don't look that good now. Like they say,, they don't run good untill you put some scratches on them.

Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host.

I have changed the image(s) to link(s) and/or clickable thumbnail(s) so that people don't have to scroll to read the thread. You can also upload clickable thumbnails that can be selected to view the photo at the original resolution.

-ksb51rl

[jordanboucher]

Here is my shelf princess after bashing

[pavmentsurfer]

First is my Basher. All upgraded, VXL, Rustler body, Stamp VXL wheels and 30 series Badlands.


Next is my S-Pede project. So far its completely stock except for a custom built body. Upgrades on the way including Jaco Foams all round and new gearing. Trying to break 70mph.

[Krazee DD]

Finished restoring my 1994 Stampede....Amazing fun it was. Runnin like a champ now and made it a Grave Digger haha!

[djmaincheese]

[djmaincheese]

[jesterklown]

My RaceReady 'Pede

[lazychubs]

heres my new vxl only had it a few days and alread y have upgraded the wheelie bar wheels to alloy ones and alloy front caster hubs in red
bearing carriers are on order aswell plus changed the shell just gotta drill and fit it

[djmaincheese]

[kustommaxx]

My 1/8 Stampede.

[lazychubs]

heres my latest shell as beetle was amare to fit so didnt run it
landrover defender 90 by hpi

[sladek]

Here's my 'pede.

FLM EXT Chassis
RPM Rear arms
RPM Bearing Carriers
RPM Caster Blocks
RPM Rear Bumper Mount
RPM Rear Shock tower
HPI F150 Body
Slash bumpers all round
Spektrum 2.4
Proline M2K tyres on rims wheels front and RPM rims back

Will upgrade to front RPM arms, turnbuckles and shock tower when originals break.

Stampede in action



Please keep all images to a width of 640 pixels or less.
-ksb51rl

[Sectsy Stampede]

Current Upgrades:
Novak Havoc 8.5 sensored Brushless
2075 Blue Waterproof servo
Blue Stock length REM Chassis
Blue REM Front and Rear shock towers
Blue RPM a-arms all around
Blue Shock covers
Masher 2k's on HPI Rims
7 cell NIMH batteries
Blue TRX Caster blocks

Next Upgrades:
RPM or TRX adjustable Camber links

[empyfree]

Stampede is slowly turning shiny! The roll cage is the latest addition, however it affects the handling really badly and I spend quite a lot of my time on the roof!

[CraigV]

This is my first attempt at doing a clear body. I found a Parma ’42 Willy’s (I thought they only did Jeep)
After seeing an old style body in another thread (thanks Thunderbutt {words I never thought I would speak})


I bought what was labeled as Burgundy Metallic, but after the first coat, it looked more like bright fuchsia. I also got black for the windows, so I removed the masks & sprayed the whole inside with the black, which darkened the paint. Kinda like the way it turned out, though.



Had to trim more off the fenders than I wanted, which is a shame because there was a lot of character in them. Oh well, I still like the way it turned out.





And now…naked!





Started out as a XL-5, upgraded to a Velineon system, TRX turnbuckles all around, TRX bearing carriers & castor blocks, Futaba 3305 servo.
Merged
Forgot to add – RPM front bumper & suspension arms, TRX Big Bore shocks.

[Switchblade906]

[Arctic Fire]

Older stampede Torn Down-
RPM Shock towers, carriers, slash bumper, motor cover, traxxas caster blocks
waterproof XL-5, 2075 Servo, Tactic 2.4ghz. RPM revolvers with Moabs, Proline Hummer H2 body

[Arctic Fire]

..And my all stock XL-5 Monster stampede (Proline rustler desert rat body)

[stamper]

Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host or edit the photo in your host.
I have changed the image(s) to link(s) and/or clickable thumbnail(s) so that people don't have to scroll to read the thread. You can also upload clickable thumbnails that can be selected to view the photo at the original resolution.
-ksb51rl

[mdlopez1]

My RC Pics

67 Vette/Pede (off the shelf HPI shell)


Slampede (slash body on pede)


Pede-off Buggy (Roll Cage with home made fin)


Lots more images Full sizd so you can see details....
http://s963.photobucket.com/home/mdlopez1/allalbums

ENJOY!

[fortunespoons]

Mine's not shiny or pretty...



SPOONS

[MfizzleS62]

Hummer H1 Body 1/10th Revo Wheels and tires Wheel extensions.com spacers 3/4 inch widener 12-14 mm


http://i658.photobucket.com/albums/u...1272852599.jpg

http://i658.photobucket.com/albums/u...1272852625.jpg

Please keep all images to a width of 640 pixels or less.
-ksb51rl

[spud01]

heres is my project just need paint.

[mdlopez1]

I Put 40 series (5.9x3.5) paddles on pede...

[andromk3]

it's changed a bit but these are the only pics i have.
http://i125.photobucket.com/albums/p...IMG_0016-1.jpg
http://i125.photobucket.com/albums/p...IMG_0017-1.jpg

Please keep all images to a width of 640 pixels or less.
-ksb51rl

[Dknuckles]

Heres my childrens stampedes. All three are Velineon Brushless. They have a few RPM hop ups with more on the way!

RPM Front bumper
RPM Reay Wheelie bar mount
RPM Motor Protector

http://sphotos.ak.fbcdn.net/hphotos-..._3706607_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._3706607_n.jpg

Please keep all images to a width of 640 pixels or less. To do this, you must edit the image using an image editor before you upload the picture to your host or edit the photo in your host.
I have changed the image(s) to link(s) and/or clickable thumbnail(s) so that people don't have to scroll to read the thread. You can also upload clickable thumbnails that can be selected to view the photo at the original resolution.
-ksb51rl

[Gunstar Hero]

Here's my old Stampede. Pre XL1 (bought in 2002) originally it had a mechanical speed control and a Stinger 20T (long gone!) and it's been the recipient of many many power combos over the years. Recently updated with the XL5 and Titan 12T out of my 2WD Slash (upgraded to VXL), it can still get down with the big boys! With a 8.4 battery it'll walk a 20 foot wheelie from a dead stop on asphalt, and give a stock 2WD Slash a run for it's money on the dirt!

[Arctic Fire]

Please keep all images to a width of 640 pixels or less.
-ksb51rl

640 or less? What are we to look at postage stamps now? you can't be serious. Thats a Joke, and is going to cause me to find another forum. That's Crap. Time to update your EGA monitor there ksb51rl...

[Arctic Fire]

shrunk my pictures....









Also an updated Pic of the hummers basher buddy, the Monster. Just replacing parts as they break, so no major upgrades except RPM stuff here and there. I like the shock covers, they seem to really help in the mud and dust.

[ksoul]

[thedreadedend]

this is my 1/8 REM vxl stampede. the F-Bombtruck-basher body

[RCveteran]

[MM_jms493]

My first ever RC paint job (at over 30, lol)......I learned alot...look forward to the next one.

[MambaMaxPede]

[MambaMaxPede]

[TAT2]

Just a few random, older pix.

[Mr.Nitro]

Same truck, diffrent rims/tires. I like how these ones look better.

[Canstamp]

http://www.royallepagemc.ca/60/38560/324591/324591.ipv

The kids first attempt at painting a body so he kept it pretty basic. Stock body met it's maker after some pretty hard bashing. New chassis, shocks, steering servo and various other parts.

[Champy]

Here are a few shots of my 2" extended Stampede
Get'n dirty:







And all cleaned up: