The NEW Stampede gallery - Post your pictures here!

**pede2011** · 03-17-2011, 08:55 AM

https://picasaweb.google.com/Michael...17586204179298

This is an HPI nitro MX-1 truck body #7161

**rraattrroodd** · 03-17-2011, 09:53 PM

**snowfighter** · 03-17-2011, 10:02 PM

http://www2.snapfish.com/snapfish/sl...021_938464021/
Mine and my daughter pedes Mine xl-5 with VXlsystem protrac arms, imex clawz,Intregy piggyback shocks, TRX aluminum c blocks,steering block and rear carriers with bearings.Daughters mostly stock xl- 5 Slash front bumper,wheeeliebar,STRC aluminum c blocks,steering blocks and rear carriers all with bearings and traxxas camber and steering links.

**rraattrroodd** · 03-20-2011, 01:25 PM

yeeeeey haaaaaaa

**CAPTAIN SPEED.** · 03-26-2011, 06:48 PM

Was looking through the pics and mine turned into a blue ? mark... so here is my baby again

**Rcecarbldr** · 03-28-2011, 06:03 PM

Here's mine with a Pede 4x4 body. I ordered it to replace the original one and the wrong one was sent but I don't care. It's mostly stock except for the Integy Shocks, Proline wheels and tires, wheelie bar wheels and the ESC fan to go with my 3S Lipo. Oh, and I have an Integy front body mount and HiTec servo which added just a little weight to the front which I was wanting. I have the Protrac kit coming for it and I'll probably put Masher tires on it then.

**QYKSLVR** · 03-30-2011, 02:14 AM

My VXL Grave Digger. Nothing special:
RPM Arms
TRX Caster Blocks/Carriers
TRX blue wheely bar wheels
MIP shafts
3s 5000mah 50C
LEDs from RC Lighthouse

**AbSoLooT1** · 03-31-2011, 05:57 PM

Had posted mine up, But here it is completely done. Low and wide now...

**MARK Yo** · 04-03-2011, 12:39 AM

This is how I roll

**QYKSLVR** · 04-03-2011, 03:31 AM

My how things change:
Full blue RPM: F/R Arms, gear cover, motor mount/wheelie bar mount
Aluminum turnbuckles/Links(not installed)
Time to get rid of the stock shocks. bent a 2 shafts =/ you can see here

with my 4x4:

**QYKSLVR** · 04-03-2011, 06:41 PM

Keep it goin!

**QYKSLVR** · 04-04-2011, 06:39 PM

**officertyo** · 04-06-2011, 09:02 AM

My $20 xl-1 pede

**QYKSLVR** · 04-07-2011, 03:41 PM

My 2wd right now =( broke a shock tower:

**kleinkoppi** · 04-08-2011, 12:10 AM

New body

**doug11** · 04-12-2011, 11:11 PM

Aluminum GRAVE DIGGER http://img834.imageshack.us/i/gravediggerrc007.jpg/ http://img59.imageshack.us/i/gravediggerrc006.jpg/ http://img197.imageshack.us/i/gravediggerrc003.jpg/ http://img59.imageshack.us/i/gravediggerrc006.jpg/ http://img861.imageshack.us/i/gravediggerrc002.jpg/

**doug11** · 04-13-2011, 09:37 PM

**BaldyDaniels** · 04-14-2011, 11:21 PM

[IMG]

[/IMG]

[IMG]

[/IMG]

**mnewbolds** · 04-16-2011, 07:14 AM

Everyone asks my why.... I say because I can!

Uploaded with ImageShack.us

**mnewbolds** · 04-16-2011, 07:31 AM

Uploaded with ImageShack.us

**BanditManiac** · 04-16-2011, 07:42 AM

Stampede vxl - body lowered

**QYKSLVR** · 04-17-2011, 05:16 PM

Im diggin that hummer Baldy.

**bjoehandley** · 04-17-2011, 08:20 PM

Just mounted up a fresh body on my old Pede today after doing a few 3s pass related repairs were finished

I don't know why, but there seems to be a little Countach in the profile views of this body

I'm hoping this low down nose will be good for more 3s passes

Verses the Crowd Pleazer 2

**mnewbolds** · 04-18-2011, 04:42 PM

Custom Wired Headlights and taillights! Thank You Radio Shack!

**mnewbolds** · 04-18-2011, 05:57 PM

Runs off of a 9v power source. Rears came as assemblies w/ resistors. The fronts are 5mm High brightness whites inside mounting assemblies with added 180ohm resistors. Switch mounted behind rear window. Got a little messy with the hot glue, but not bad I think for a first time slodering and working w/ Led's.

**DiggerPede** · 04-20-2011, 07:29 AM

Our Bashers....

Mine...Digger BL VXL

ProTrac, Masher 2000, & Red LEDs

Hers....Pede XL-5

Brushed Titan still running strong....

**QYKSLVR** · 04-20-2011, 03:46 PM

I have a twin! kinda. lol

**QYKSLVR** · 04-26-2011, 11:21 PM

No fun =(

**bmichaelong** · 05-02-2011, 04:23 PM

My Slampede
Side by side with stock Stampede

**jornaldo** · 05-07-2011, 03:52 PM

**usinkit** · 05-14-2011, 10:40 AM

[IMG]

[/IMG]

**nctraxxasbasher** · 05-17-2011, 07:49 PM

Here's Mine

It has a sidewinder sct,vxl camber links all around,lowered body,and rpm caster blocks.
The last picture is old so it doesnt have the camber links or sidewinder

**Kinyocase** · 05-21-2011, 09:16 PM

My bone stock Stampede my uncle just sent me posing in front of my 32" R/C Ski Boat. Hope it's okay to post her up with her trailer queen...(trailer not built yet)...Looking forward to upgrading this one a bit before I purchase a VXL for myself and prolly a slash for my wife.

**DiggerPede** · 05-22-2011, 09:58 AM

Figured i'd post an updated pic of my upgrades. The Digger body is starting to get a little ragged cuz of all the bashing (looks like it's been through freestyle). =D

**QYKSLVR** · 05-22-2011, 05:28 PM

Cant wait for my roller to get here Tuesday! =)

**sdelam** · 05-22-2011, 08:15 PM

Got this for Christmas, its been beat up pretty good. Put the lights in a few months ago, they plug into the esc and have taken alot of abuse. Just installed a protract kit, big bore shocks and trencher's. Ordered all my aluminum and a VW body but they havn't come in yet.

**sdelam** · 05-23-2011, 08:42 PM

Could not wait for the VW body to come in so... I picked up a new VXL body from the LHS. It has VXL stickers and paint but the body is different and it has a hole like a XL-5. The stickers didnt fit right so I had to make them work. I think the color turned out great though.

**QYKSLVR** · 05-24-2011, 11:21 PM

Color looks great! Just finished my digger VXL build:

**BaldyDaniels** · 06-05-2011, 08:46 AM

Body is a Parma 3 piece 57 chevy bel air with custom paint.

**spede13** · 06-15-2011, 02:00 PM

Thread: The NEW Stampede gallery - Post your pictures here!

Thread Tools

Display

Digger VXL & Pede....

Stock Stampede...my new baby.

Posting Permissions