Results 1 to 3 of 3
  1. #1
    RC Competitor
    Join Date
    Mar 2015
    Location
    Finland
    Posts
    87

    Question Servos wont turn the tires

    So i have 2x SW-1210sg servos with the heavy duty saver spring and a bec wired to run the all the receiver, but the tires still wont turn when standing still. These servos should be more then enough for turning the stock tires. Was just out with it and my friend has a stock Summit so we compared and mine was allmost as bad as stock. I have a aluminum steering assembly coming, but should i wire the BEC to only run the servos and the ESC would power the receiver like normally would like in this thread? Or could the problem be something else? Have the CC 10amp BEC
    https://forums.traxxas.com/showthrea...nal-BEC-How-to
    Last edited by PahviNalle; 11-21-2017 at 02:12 PM.

  2. #2
    RC Competitor
    Join Date
    Jun 2011
    Location
    watertown ny
    Posts
    95
    I run 2 savox 0251 mg water proof servos in mine no bec an it steers at a stand still sounds like u should hook the servos tonyour bec an power rx from esc might make a diffrence

  3. #3
    RC Champion
    Join Date
    Oct 2016
    Posts
    2,895
    Servo saver loose? Do they have one?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •