Results 1 to 3 of 3
  1. #1
    RC Racer
    Join Date
    Jun 2017
    Location
    Belgium
    Posts
    116

    Battery fitment ?

    I'm considering buying a second hand Summit.
    Some of my 2S lipo's have a banana/bullit connector on top, at the end of the battery (you can remove the lead wires from the battery).
    They are the right size but these connectors stick up and don't flex.

    Could I use these lipo's without modding the battery box ?

  2. #2
    RC Champion
    Join Date
    Apr 2018
    Posts
    1,013
    You can slip the wires through the battery vent openings either through the front or rear ones. I run mine through the rear vent opening. Works well for my batteries that the wires exit through the side of the them. I can close my doors and have the wires come out the vent openings located at the rear of the battery tray up top. You may have to cut the slats on the vent openings. Not a hard mod to perform.

  3. #3
    RC Racer
    Join Date
    Jun 2017
    Location
    Belgium
    Posts
    116
    Thanks for the info !

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •