Results 1 to 7 of 7
Thread: cracked plastic exhaust help
-
04-30-2009, 08:37 PM #1RC Competitor
- Join Date
- Apr 2009
- Location
- long island
- Posts
- 82
cracked plastic exhaust help
have a stock t-maxx 2.5 4910
here's the problem
the black plastic pipe is separating at the seam
what type of glue can I use to fix it?
plastic cement?
thanx
-
04-30-2009, 08:45 PM #2RC Racer
- Join Date
- Apr 2009
- Location
- Maryland
- Posts
- 199
You could use that.
But it will most likely give you problems down the road.
I suggest you just buy a new exhaust on ebay for like 10 bucks.
Or go with the resonator for power at only around 25 bucks.Can I drive? NO, you can't HANDLE the power!
-
04-30-2009, 10:24 PM #3RC Champion
- Join Date
- Apr 2006
- Location
- Decatur, AL
- Posts
- 1,244
Definately spring for a new exhaust. The heat will probably melt the glue and give you tuning headaches.
The road goes on forever and the party never ends!!!
-
04-30-2009, 10:45 PM #4RC Competitor
- Join Date
- Apr 2009
- Posts
- 88
if you dnt want a new one jb weld it back
-
04-30-2009, 10:47 PM #5RC Champion
- Join Date
- Jun 2008
- Location
- Kentucky
- Posts
- 1,430
+1 on the JB weld
Revo Picco 26
T Maxx3.3
Jato3.3
RC10GT
XXX-NT
-
04-30-2009, 10:50 PM #6Marshal
- Join Date
- May 2008
- Posts
- 13,563
I was going to say JB Weld. It's some pretty good stuff but may just be temporary. I would get a new one at an inexpensive cost and go with that.
The Super Derecho
-
04-30-2009, 11:07 PM #7RC Racer
- Join Date
- Jun 2005
- Location
- MN
- Posts
- 223
My stock on split before. It's just gonna keep splitting all the way up the seam and get oil everywhere. Perfect time for an upgrade. Upgrade as it breaks!
Reply With Quote
