Results 1 to 5 of 5
  1. #1
    RC Qualifier
    Join Date
    Dec 2013
    Posts
    275

    Bake 325 for 30 min-Tire Removal

    I had some 2.8 tires i wanted to remove and reuse. I use these on my Slash MT. One was glued crooked and two had stripped hexes. These were well glued (not factory glued). Came off the rim very easy. Baked at 325, 15 min each side. It really does work and yes it smells.



    Sent from my SM-G930U using Tapatalk
    Slash 4x4, E-Revo, Stampede 2wd (3 of them)

  2. #2
    RC Competitor
    Join Date
    Sep 2015
    Posts
    62
    I have always used the boiling method myself. But happy this way worked for you.

  3. #3
    RC Qualifier
    Join Date
    Dec 2013
    Posts
    275
    What was the condition of the foams after boiling? These had been taped to prevent balooning. Tape and foam are still perfect.
    Slash 4x4, E-Revo, Stampede 2wd (3 of them)

  4. #4
    RC Competitor
    Join Date
    Sep 2015
    Posts
    62
    Foam come out fine as long as you don't try and stretch them. Before they cool you can damage them easy if not careful. With boiling they don't experience temperatures over 250 degrees.

  5. #5
    RC Racer
    Join Date
    Dec 2016
    Location
    Burleson, Texas
    Posts
    152
    I also boil mine. Like everyone else says, be careful with the tire/foam and they're reusable.
    Scott
    Slash 2wd
    Slash Ultimate 4wd
    Stampede 4wd

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •