Results 1 to 26 of 26
  1. #1
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293

    Slash 4X4 Platinum with Mamba Max ESC

    I cant decide what to sell this for so im just going to post it and see what happens.
    This is an almost mint Slash 4X4 Platinum edition with a VXL motor and Mamba Max Monster 1/8 ESC. The truck is in incredible condition. Its been run for less than 2 packs, and the 2nd pack was on my paved road covered in sand. I THROUGHLY cleaned and inspected the truck after the last use, removed my radio and its up for sale. Here a description of condition:
    -There is paint overspray on one corner of the bumper/suspension
    -There are some scratchs from normal use on the bottom of the front and rear skidplates though the scratchs are just minor, not deep at all (see pics)
    -The MMM ESC has had the double battery connection changed to single TRX connection.
    -The RX box has been changed to the smaller version and mounted at the front of the driveshaft behind the front shock tower.
    -The VXL motor has had new connectors soldered to connect to the MMM ESC
    -There is NO body included. The body was used on another truck and is beat up bad. I will throw it in with the purchase but its not listed as worth anything. Its just extra... consider it packing material in the box. Its not destroyed... its not not very nice.
    -The tires are well over %90 life left and the wheels are next to mint. The majority of the running this truck has had was on pavement. But the tires are still very good.
    -There is no centre diff included. It was sold previously.
    -There are plastic rear carriers (with bearings) on the rear and a single aluminum rear carrier included. A new aluminum rear is on its way and will be forwarded to the buyer when I get it. Its being replaced by traxxas.

    Also included with the truck are the following:
    -Hot Racing heat sink motor mount (installed)
    -New 15 and 16 tooth pinoins, a 13 tooth pinion (installed) and 2 other pinions, not sure what tooth, but they are the same and have no number on them.
    -Extra 54tooth spur
    -Stock motor mount
    -4 extra axles and 2 extra drive shaft halves
    -Box and manuals

    This package also includes the Castle Link USB adapter for the ESC. These sell for between $15 and $20. But its included here.

    The truck has no radio and comes as pictured and as described. I dont knwo how to price this truck so im going to throw a price out there and make it OBO. So, feel free to send me reasonable offers.

    Asking $380 OBO Shipped anywhere in North America.








    Last edited by pavmentsurfer; 03-19-2010 at 10:13 PM.

  2. #2
    RC Qualifier
    Join Date
    Mar 2010
    Posts
    279
    why are you selling it it looks great and probably runs great to. oh did i say run i ment fly

  3. #3
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    I had a big project in mind for it. But its come to my attention that A: I have too man RC's and B: We (my wife) could use the money.
    So, I have to sell the trucks that arent as close to my heart. My Pede and Rusty stay... this one is a great truck, but its worth the most and its in the nicest condition and I havent used it. Oh well.

  4. #4
    RC Qualifier
    Join Date
    Mar 2008
    Location
    Enumclaw,WA
    Posts
    743
    I don't remember but, if there isn't a center diff, It doesn't have front or rear drive or both?
    Thanks
    Rustler|Brushless Losi XXL

  5. #5
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    Nope, it is still 4 wheel drive, in fact, technically its MORE 4X4 than with a centre diff. The centre diff allows power to be output to the front and rear differently as its needed. Just like the diff on the rear of a 2wheel drive car. If you grab one wheel and hold it, the other will spin. This would be the same for the 4X4 diff. If the front wheels stopped, more power would be diverted to the rear. It helps with handling on a track, but will give less consistent 4X4 action when bashing.
    The slipper set up, like this truck has, evenly distributes equal 4X4 power to the front and rear of the truck.

  6. #6
    RC Qualifier
    Join Date
    Apr 2007
    Location
    Lawrence, Massachusetts
    Posts
    760
    Hoe much without VXL motor and MMM esc?
    E-Revo:Stock
    Slash 4X4 PE:MM/Medusa 3300KV

  7. #7
    RC Racer
    Join Date
    Jan 2009
    Posts
    158
    would you be looking to trade for a e-revo? am in quebec

  8. #8
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    Without the mmm and vxl I'd be looking at $225 shipped.
    Is the erevo brushless? I'd consider a partial trade for a MERV in mint shape and a bit of cash. Just not sure I'm looking for a full sized brushed revo.

  9. #9
    RC Racer
    Join Date
    Jan 2009
    Posts
    158
    its a brushed e-revo, with 2 set of tires, ill throw in the 2 lipos with it for a trade with your 4x4 slash, we both keep our radios, and ill include the stock tx/rx of the e-revo

  10. #10
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    Thanks for the offer but I really need to sell and the only reason id look at a MERV is because I think my wife might actually like driving it. Shes driving my pede a few times this week and ended up laughing and having fun. If she had a little car of her own to run in the parking lots she might enjoy it. But a revo is just too big and, if I cant get a MERV... ill take cash.

    This truck is listed on e-bay and RCU now. Putting it up anywhere I can. Get it before its gone.

  11. #11
    RC Racer
    Join Date
    Aug 2009
    Location
    Hickory,NC
    Posts
    146
    New in box Merv.

  12. #12
    RC Qualifier
    Join Date
    Jan 2009
    Location
    Staunton, VA
    Posts
    521
    If youd part it out how much would you take for the aluminum parts and the big bores?
    Slayer, Slash 4x4 (MMM/2650kv), & a Summit

  13. #13
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    Its on e-bay right now so one way or another its going to sell. I dont think ill be parting it out.
    Thanks for the offer though.

  14. #14
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    up for the night.

  15. #15
    RC Qualifier
    Join Date
    Jan 2010
    Location
    virginia
    Posts
    410
    TTT im thinking about convincing my wife i need this truck

    What is the ebay link?
    summit, vxl merv,65mph club
    Oh No I Use Acronyms

  16. #16
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    http://cgi.ebay.ca/ws/eBayISAPI.dll?...#ht_514wt_1167

    Thats the link. Its got almost 50 watchers and over a day left. Ill take it down if someone on the forums here wants to buy it. I have a buyer I think, im just waiting on payment. I should know by the end of today. If you want it summit, ill work something out with you for sure, if the current interested buyer backs out.
    pave

  17. #17
    RC Qualifier
    Join Date
    Sep 2008
    Location
    Pittsburgh
    Posts
    852
    good luck with that
    Last edited by milkman; 03-23-2010 at 01:40 PM.
    Three Summits

  18. #18
    RC Racer
    Join Date
    Nov 2009
    Location
    Ontairo,NY
    Posts
    172
    hey i have a mint 70 % aluminum Rustler vxl its in great shape
    Wow how fast is Nitro? Oh WOW..Really..That slow?

  19. #19
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    No thanks on the rusty, ive got one. I need a MERV mostly stock and cash, or just cash.

  20. #20
    RC Racer
    Join Date
    Nov 2009
    Location
    Ontairo,NY
    Posts
    172
    alright thanks
    Wow how fast is Nitro? Oh WOW..Really..That slow?

  21. #21
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    So, the guy who won on e-bay backed out. As I find so many on e-bay do. Its so frustrating.
    Therefore, this truck is still up for sale.

    Im throwing in a traxxas motor heat sink now also.

    NEW PRICE: $270 shipped.

    I can add a 2S 4000mah Venom Hardcase lipo for $30, or 2 of them for $55
    I can also add a brand new, never opened Venom 4000mah 3S lipo with the universal plug system for $45.

  22. #22
    RC Qualifier
    Join Date
    Jan 2010
    Location
    Fairfield, ca
    Posts
    782
    1/10 sidewinder 5700 brushless slash and mini slash vxl for trade?
    Traxxas should just cash my checks for me

  23. #23
    RC Qualifier
    Join Date
    Jan 2010
    Location
    virginia
    Posts
    410
    Pm sent.....
    summit, vxl merv,65mph club
    Oh No I Use Acronyms

  24. #24
    RC Racer
    Join Date
    Apr 2003
    Location
    NJ
    Posts
    131
    Just a thought...
    Doesn't ebay still have a "SECOND CHANCE" option?
    You're able to offer it to the top loosing bidder, when the winner backs out.

  25. #25
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    Summit... PM Replied... love to make it work.

    HVRC... if things dont work with summit your next on my list. Can you send me pics to LL13X@hotmail.com? Id like to see both trucks.

    micro... the second chance guy backed out long before the auction ended. He came up with some excuse, the guy before him had 0 feedback and I wont deal with guys with 0 feedback on an item this big. Just an all out crapshoot on e-bay this time really.

  26. #26
    RC Turnbuckle Jr. pavmentsurfer's Avatar
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    11,293
    Sold to Broken Summit
    Thanks buddy, happy it went to a good home.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •