Results 1 to 15 of 15
  1. #1
    RC Qualifier
    Join Date
    Jun 2009
    Location
    Nebraska
    Posts
    382

    Why does my steering and throttle control?

    Why does my truck l turn and also run the throttle when I turn the steering wheel only yet the throttle trigger does not make the wheels move in forward or reverse?

    I read the guide and still cannot figure out
    BL Revo, eRevo, MERV x 3 and still counting.

  2. #2
    RC Racer
    Join Date
    Jun 2010
    Posts
    146
    If you look closely at the reciver, where the servos plug in there are two CH1 sockets, so you can run dual steering servos. you need to move the speed controller servo down one more to CH2

    i just did the same thing, i had never seen a reciver with dual CH1's

  3. #3
    RC Qualifier
    Join Date
    Jun 2009
    Location
    Nebraska
    Posts
    382
    Quote Originally Posted by 1badkingcab
    If you look closely at the reciver, where the servos plug in there are two CH1 sockets, so you can run dual steering servos. you need to move the speed controller servo down one more to CH2

    i just did the same thing, i had never seen a reciver with dual CH1's

    Thanks man, that did the trick and fixed my problem
    BL Revo, eRevo, MERV x 3 and still counting.

  4. #4
    RC poster
    Join Date
    Dec 2012
    Posts
    1
    I have a problem when i use my steering it excelerates and turns as well and the throttle does nothing

  5. #5
    RC Turnbuckle Jr.
    Join Date
    Mar 2012
    Location
    so cal
    Posts
    9,244
    Sounds like you switched the leads on your receiver

  6. #6
    RC Qualifier
    Join Date
    May 2012
    Location
    Slovenia
    Posts
    322
    Quote Originally Posted by dillan1234 View Post
    I have a problem when i use my steering it excelerates and turns as well and the throttle does nothing
    Thats because your servo AND esc are plugged into ch1

  7. #7
    RC poster
    Join Date
    Jan 2015
    Posts
    1
    I have rustler and wen I pull the throttle it just goes out of control and I can't stop it unless I cut it off by holding the line can u plz help???it just goes by it self

  8. #8
    RC Qualifier Whitecobra's Avatar
    Join Date
    May 2013
    Location
    Lincolnton, NC
    Posts
    291
    Quote Originally Posted by Kevkoolin16 View Post
    I have rustler and wen I pull the throttle it just goes out of control and I can't stop it unless I cut it off by holding the line can u plz help???it just goes by it self
    Sounds like you have a nitro. You posted in electric section. Start your own thread, and give as much description you can as to what its doing. We will help you get it figured out.
    1997 White Mustang Cobra its not a RC!

  9. #9
    RC Qualifier
    Join Date
    Jul 2014
    Posts
    347
    hi guys i have a similar question, i have a fan for my motor do you know what CH that whould go? i put it in CH 1 for now and it works but maybe it turns off when i steer or something...

  10. #10
    RC poster
    Join Date
    Nov 2015
    Posts
    1
    Thank you so much. I had this problem also. It was making me so mad I didn't know what was going on.

  11. #11
    RC Turnbuckle Jr. Petertje60's Avatar
    Join Date
    Jan 2011
    Location
    Rotterdam, Netherlands
    Posts
    8,617
    Quote Originally Posted by Tmick View Post
    Thank you so much. I had this problem also. It was making me so mad I didn't know what was going on.
    Welcome to the forum. You see that even the older topics can be very useful
    Nobody is born with experience

  12. #12
    RC poster
    Join Date
    Jan 2017
    Posts
    1
    my steering won't turn left or right but it will excellerate front and back but my throttle does nothing

  13. #13
    RC Enthusiast
    Join Date
    Jan 2017
    Posts
    30
    channel 1 (2x) is for the steering servo. channel 2 is for the esc. You must have it plugged in wrong.

  14. #14
    RC poster
    Join Date
    Jul 2017
    Posts
    1
    c
    I have a rustler vxl and when I drive my 8.4 nihm battery it does this weird thing with the power. When ever I apply throttle it jolts to a stop real quick and then continues also when it does that it cuts out the steering and Fan. Any ideas or ways to fix it???

  15. #15
    RC Turnbuckle Jr. Petertje60's Avatar
    Join Date
    Jan 2011
    Location
    Rotterdam, Netherlands
    Posts
    8,617
    Quote Originally Posted by jasonjr View Post
    c
    I have a rustler vxl and when I drive my 8.4 nihm battery it does this weird thing with the power. When ever I apply throttle it jolts to a stop real quick and then continues also when it does that it cuts out the steering and Fan. Any ideas or ways to fix it???
    You're in the wrong forum. Rustler/Bandit forum can be found here

    LVC might be activated on your ESC.
    Nobody is born with experience

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •