Page 8 of 10 FirstFirst ... 678910 LastLast
Results 281 to 320 of 386
  1. #281
    RC poster
    Join Date
    Jun 2015
    Location
    NW of ATL
    Posts
    10
    I bought this used and tossed on new wheels, tires, and body




    I'll finish the body soon

    Rock on!

  2. #282
    RC Champion
    Join Date
    Jun 2015
    Location
    Brossard, QC
    Posts
    1,211
    Here is mine. Still using the old body. I bought this used together with a e-revo 1/10. I completely disassembled it and put it back together, fixing any problems and broken parts at the same time. I am hoping to finish painting the new body soon, and it will be a perfect little truck.


  3. #283
    RC poster
    Join Date
    May 2015
    Location
    Vellberg, Germany
    Posts
    4
    This is my Stampede 4x4. I bought him a few weeks ago. Since then I installed...

    - Castle Sidewinder SCT / 3800kv combo
    - blue aluminum shock caps
    - blue aluminum axle carriers aud c-hubs
    - aluminum center drive shaft
    - aluminum slipper bearing adapter

    I also bought parts for e-revo slipper conversion, these are not installed so far. The bodies are from pro-line.




  4. #284
    RC poster
    Join Date
    Jul 2015
    Posts
    8
    Here's my Pede



    Last edited by EchoplexSE; 07-08-2015 at 08:14 AM.

  5. #285
    RC poster
    Join Date
    Jul 2015
    Posts
    8
    Installed the sidewinder 8th combo last night ����





    I cut a piece of ABS and gorilla glued it to the chassis and screwed the esc to the ABS. A little unsure how that will hold up, but we'll see.

  6. #286
    RC poster
    Join Date
    Sep 2011
    Posts
    1

    Bigfoot Stampede

    The Parma '67 Ford F100 never looked so good. Standard brushed 4x4 with monster jam fronts all the way around. Had to use Telluride body mounts to fit this body. Trimmed the fenders to fit and line up with tires. Still need to re-do the grille decal though.






  7. #287
    RC Turnbuckle Jr. jvogel's Avatar
    Join Date
    Oct 2010
    Location
    PM me if you want to bash near Grass Valley, CA
    Posts
    3,144
    SP225, first post. Welcome to the forum! See-through truck bed. Dang, sexy!
    Obstacle Magnet

  8. #288
    RC Turnbuckle Jr. GeneralPede01's Avatar
    Join Date
    Sep 2015
    Location
    Toomsuba, Ms
    Posts
    3,186
    Stampede 4x4
    Mip axles front/rear
    Traxxas caster block
    Traxxas steering block
    Traxxas axle carrier
    Rpm shock towers, front bumper
    Esc fan, integy heat sink with fan
    General Lee 72 Chevy body

  9. #289
    RC Turnbuckle Jr. GeneralPede01's Avatar
    Join Date
    Sep 2015
    Location
    Toomsuba, Ms
    Posts
    3,186

  10. #290
    RC Enthusiast
    Join Date
    Mar 2014
    Posts
    43
    My p4de:

    Slash tub swap
    XO-1 Diff
    Proline Long Arm kit
    MIPs
    Several Aluminum parts (castors etc etc)
    King Headz Motor Mount
    Aluminum Bearing adapter
    Big Bore shocks
    Castle MMP
    1900KV
    4s
    Etc.
    Etc.


  11. #291
    RC Enthusiast
    Join Date
    Apr 2013
    Location
    Russia\Sakhalin
    Posts
    42

    Talking

    from Russia










  12. #292
    RC Racer
    Join Date
    Aug 2014
    Posts
    105
    My newly purchased 4x4 VXL. I custom painted the F150 Proline body and added some Mashers which I screwed up on and got the rears all around so they rub on the stock and upgraded shell. Stupid. Looking for some new tire options now.







    Last edited by dbdynsty25; 11-08-2015 at 01:19 AM.

  13. #293
    RC poster
    Join Date
    Dec 2010
    Posts
    13
    Wanted to dye my chassis black so I finally did it and glad I took the effort to do it because now the truck looks exactly how I want it to.



  14. #294
    RC Enthusiast
    Join Date
    Mar 2013
    Location
    St. Clairsville, Oh
    Posts
    27
    my telluride
    gonecamping

  15. #295
    RC Enthusiast
    Join Date
    Mar 2013
    Location
    St. Clairsville, Oh
    Posts
    27
    Last edited by gonecamping; 11-21-2015 at 08:36 AM.

  16. #296
    RC Racer
    Join Date
    Aug 2014
    Posts
    105
    A few new shots w/ the new Hummer shell I painted.








  17. #297
    RC Competitor
    Join Date
    Jun 2009
    Posts
    81

  18. #298
    RC Competitor
    Join Date
    Jun 2009
    Posts
    81

  19. #299
    RC Turnbuckle Jr. Briber's Avatar
    Join Date
    Dec 2015
    Location
    St. Peters, MO
    Posts
    3,329
    Pedes can fly!
    Last edited by Briber; 12-10-2015 at 02:22 AM.
    Just need one more rc, then Ill be done...

  20. #300

  21. #301
    RC Turnbuckle Jr. Briber's Avatar
    Join Date
    Dec 2015
    Location
    St. Peters, MO
    Posts
    3,329


    Improvement to my P4de.
    Just need one more rc, then Ill be done...

  22. #302
    RC Turnbuckle Jr. GeneralPede01's Avatar
    Join Date
    Sep 2015
    Location
    Toomsuba, Ms
    Posts
    3,186
    My fully upgraded stampede vxl 4x4.
    Dyed chassis
    MMX/2650kv
    4s lipo
    Revo slipper/alum pads
    Alum bearing adapter
    Traxxas motor mount
    Traxxas caster block
    Traxxas steering hub
    Traxxas axle carriers
    Traxxas motor plate
    Traxxas sway bar kit
    Lost ten scte shocks
    2.8 swamper/ 3.2 revolver
    Mip axle front/rear
    Mip 17mm adapter
    Rpm a-arms
    Rpm front bumper
    Rpm slash rear bumper
    Rpm shock towers
    Traxxas bumper lights
    Rpm mock intake
    Black general lee body
    Shoe goo body mod
    Slash lcg receiver box
    Braided expanding sleeve
    Xo-1 diff front/rear
    RR pinion
    Slipper foam mod
    Velcro battery straps
    Proline screw on caps
    Rpm dirty danglers chrome

  23. #303
    RC poster
    Join Date
    Apr 2015
    Location
    Kelowna, BC
    Posts
    5

    Cool '97 Parma Bigfoot Truck No. 14

    This is my latest shelf creation! My tribute to Bidfoot truck #14! I started project back in mid October and just finished it yesterday. I've got pretty close to around 100 hours or more into this build including all the scratch building, research, decals etc., etc. The mod list includes additional custom made decals not included with the body. I made a new front grill decal and emblem because the original didn't look very good at all. I even did painted the rivets as well. Also scratch built the top driving lights, rear roll bar, flag and pole and the two red and yellow LED lights mounted behind the windshield. These I believe are for when the engine is actually running and the other is for Remote Ignition Interrupters to tell which side the driver has chosen to run his `RII' receiver box on.

    Next step is installing the new Sense Ess ONE+ Engine Sound System I got the other day and it will be finally complete.

    Cheers





















  24. #304
    RC Enthusiast
    Join Date
    Jan 2016
    Location
    Wisconsin
    Posts
    21

    New Stampede 4x4 XL-5

    Stampede 4x4 XL-5
    5800mAh Traxxas 2s Lipo
    Parma honcho body with camo paint
    Proline f-11 rims with trenchers


    There are so many cool looking stampedes on here!

    Just got this truck about a week and a half ago and love it. I got the body right away as I'm not a big fan of the stock body (no offense) and modded the body mounts to fit it. This is my first hobby grade rc (1/16 exceed doesn't even count) and first rc paint job. After a few runs and some researching I decided to get some trenchers on f-11 rims to complete the look. I'll keep the maxx tires for snow bashing as they are pretty good in the snow. Not planning on upgrading to brushless anytime soon as this truck is plenty for me... am pondering a light kit as a final upgrade though...








  25. #305
    RC Racer
    Join Date
    Dec 2015
    Location
    Rochester ny
    Posts
    159
    Here are some pics of my stampede 4x4
    Pro line body mount
    Proline chevy 2500 HD body
    Proline trenchers
    Burned up brushed motor upgraded to traxxas brushless













  26. #306
    RC Competitor
    Join Date
    Jan 2013
    Posts
    51




    Added some lights to my Stampede

  27. #307
    RC Competitor
    Join Date
    Jan 2013
    Posts
    51
    Some close-ups. I used shoegoo to glue them to the body.




    Last edited by ksb51rl; 01-16-2016 at 09:54 AM.

  28. #308
    RC Competitor
    Join Date
    Jan 2013
    Posts
    51



    New paint job
    Supposed to be purple but my samsung makes it pinkish

  29. #309
    RC Competitor
    Join Date
    Jan 2013
    Posts
    51
    Photoshopped a picture to the right color:


  30. #310
    RC Racer
    Join Date
    Aug 2015
    Location
    Kentucky
    Posts
    231
    Getting ready to play around tomorrow wasn't happy with the stock tires in the snow. So I pulled the sand paws from my rusty.

    I didn't do it!!

  31. #311
    RC Enthusiast
    Join Date
    Jan 2014
    Posts
    36
    Took it out today in the snow.


    4x4 Pede VXL Brushless, 2S LiPo. Bought Feb. 2014

  32. #312
    RC Racer
    Join Date
    Jan 2016
    Location
    Columbus, OH
    Posts
    205

    New to the board but not to RC.

    Hello. I thought after reading a while and lurking I'd finally chime in and share a little. I'm 45 and started RC back in the 80's with Tamiya 2WD buggies. Didn't take long for me to start spending though and I upgraded to a Kyosho Optima Chain driven (still have it less with than 10 hours of total run time on it). For some reason I mothballed it then and stepped away until this December when my 2 boys and I all got Stampedes for Xmas. 2 straight 4x4's and one 4x4 VXL TSM. It's kind of hard to quantify my reaction other than "WOW!". Not only are these things incredible as RTR machines, but I am just totally blown away at how far the industry has come since the 90's. It's literally overwhelming. I mean slipper clutches? Just wrapping my head around possible repairs/upgrades has my head spinning. Luckily there is an awesome community like this one.

    Anyhow before this turns into a long stream of consciousness I'll just post some pics of the trucks. I'm obviously still learning the hard way with a lot of the body painting. Getting masks right and knowing mow much is too much is easy to mess up...ONCE! The one I'm working on now for my son has killing me...Flames with borders are TOUGH! I'll post a pic once it's done. He wants a black truck with pink and red flames.











  33. #313
    RC poster
    Join Date
    Nov 2015
    Posts
    18


    First time paint job. Not the greatest, but ok.

  34. #314
    RC Racer
    Join Date
    Jun 2014
    Posts
    233









  35. #315
    RC Qualifier SummitonSlingrs's Avatar
    Join Date
    Feb 2016
    Location
    Salt Lake City, UT
    Posts
    368

    The many Faces of Our P4DE

    First I had to dump the body




    Then painted up a C10 Body


    And topped it off with some Trenchers.


    Had an old Jeep RC laying around tore the body off fitted to the P4DE and painted it white.

  36. #316
    RC poster
    Join Date
    Feb 2016
    Posts
    4
    A True Stampede! I got the 4x4vxl and then my wife and youngest daughter decided to get the 2wd version as well. Only upgrades so far are the Swampers.

  37. #317
    RC Qualifier SummitonSlingrs's Avatar
    Join Date
    Feb 2016
    Location
    Salt Lake City, UT
    Posts
    368
    Quote Originally Posted by CounterTrey View Post
    Nice. Any pics with the Jeep body?
    Thank you CounterTrey!

    Yes. I didn't have the Trenchers on when I took the Pics though.






    This is a pic of the Original RC I took the body off. There was a lot of trimming to say the least.
    Last edited by SummitonSlingrs; 02-23-2016 at 11:44 AM.
    Sla2hP4deXSummitRusty2TRX4Bigfoot#14TEC2.0Rally

  38. #318
    RC Racer
    Join Date
    Jan 2016
    Location
    CT
    Posts
    100
    First time painting an RC shell.


  39. #319
    RC Qualifier
    Join Date
    Jan 2014
    Location
    Alaska
    Posts
    644
    My most recent body .








  40. #320
    RC Qualifier
    Join Date
    Jan 2014
    Location
    Alaska
    Posts
    644
    Older body...







    A really old body. First one I ever painted .




Page 8 of 10 FirstFirst ... 678910 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •