The Official Traxxas Stampede 4x4 Photo Gallery - Post your pictures here!

[DirtMadness]

I bought this used and tossed on new wheels, tires, and body




I'll finish the body soon

Rock on!

[IllusionX]

Here is mine. Still using the old body. I bought this used together with a e-revo 1/10. I completely disassembled it and put it back together, fixing any problems and broken parts at the same time. I am hoping to finish painting the new body soon, and it will be a perfect little truck.

[Lowrider72]

This is my Stampede 4x4. I bought him a few weeks ago. Since then I installed...

- Castle Sidewinder SCT / 3800kv combo
- blue aluminum shock caps
- blue aluminum axle carriers aud c-hubs
- aluminum center drive shaft
- aluminum slipper bearing adapter

I also bought parts for e-revo slipper conversion, these are not installed so far. The bodies are from pro-line.

[EchoplexSE]

Here's my Pede

[EchoplexSE]

Installed the sidewinder 8th combo last night ����





I cut a piece of ABS and gorilla glued it to the chassis and screwed the esc to the ABS. A little unsure how that will hold up, but we'll see.

[SP225]

The Parma '67 Ford F100 never looked so good. Standard brushed 4x4 with monster jam fronts all the way around. Had to use Telluride body mounts to fit this body. Trimmed the fenders to fit and line up with tires. Still need to re-do the grille decal though.

[jvogel]

SP225, first post. Welcome to the forum! See-through truck bed. Dang, sexy!

[GeneralPede01]

Stampede 4x4
Mip axles front/rear
Traxxas caster block
Traxxas steering block
Traxxas axle carrier
Rpm shock towers, front bumper
Esc fan, integy heat sink with fan
General Lee 72 Chevy body

[GeneralPede01]

[BrotherAndySLB]

My p4de:

Slash tub swap
XO-1 Diff
Proline Long Arm kit
MIPs
Several Aluminum parts (castors etc etc)
King Headz Motor Mount
Aluminum Bearing adapter
Big Bore shocks
Castle MMP
1900KV
4s
Etc.
Etc.

[Nimitzzz]

from Russia

[dbdynsty25]

My newly purchased 4x4 VXL. I custom painted the F150 Proline body and added some Mashers which I screwed up on and got the rears all around so they rub on the stock and upgraded shell. Stupid. Looking for some new tire options now.

[Trent1435]

Wanted to dye my chassis black so I finally did it and glad I took the effort to do it because now the truck looks exactly how I want it to.

[gonecamping]

my telluride

[gonecamping]

[dbdynsty25]

A few new shots w/ the new Hummer shell I painted.

[frugalman]

[frugalman]

[Briber]

Pedes can fly!

[jbobb1]

Had a little fun in the wet grass!

http://i1027.photobucket.com/albums/...&1450126307955

http://i1027.photobucket.com/albums/...&1450126307954

[Briber]

Improvement to my P4de.

[GeneralPede01]

My fully upgraded stampede vxl 4x4.
Dyed chassis
MMX/2650kv
4s lipo
Revo slipper/alum pads
Alum bearing adapter
Traxxas motor mount
Traxxas caster block
Traxxas steering hub
Traxxas axle carriers
Traxxas motor plate
Traxxas sway bar kit
Lost ten scte shocks
2.8 swamper/ 3.2 revolver
Mip axle front/rear
Mip 17mm adapter
Rpm a-arms
Rpm front bumper
Rpm slash rear bumper
Rpm shock towers
Traxxas bumper lights
Rpm mock intake
Black general lee body
Shoe goo body mod
Slash lcg receiver box
Braided expanding sleeve
Xo-1 diff front/rear
RR pinion
Slipper foam mod
Velcro battery straps
Proline screw on caps
Rpm dirty danglers chrome

[TRXAZZVXL54]

This is my latest shelf creation! My tribute to Bidfoot truck #14! I started project back in mid October and just finished it yesterday. I've got pretty close to around 100 hours or more into this build including all the scratch building, research, decals etc., etc. The mod list includes additional custom made decals not included with the body. I made a new front grill decal and emblem because the original didn't look very good at all. I even did painted the rivets as well. Also scratch built the top driving lights, rear roll bar, flag and pole and the two red and yellow LED lights mounted behind the windshield. These I believe are for when the engine is actually running and the other is for Remote Ignition Interrupters to tell which side the driver has chosen to run his `RII' receiver box on.

Next step is installing the new Sense Ess ONE+ Engine Sound System I got the other day and it will be finally complete.

Cheers

[muraski]

Stampede 4x4 XL-5
5800mAh Traxxas 2s Lipo
Parma honcho body with camo paint
Proline f-11 rims with trenchers

There are so many cool looking stampedes on here!

Just got this truck about a week and a half ago and love it. I got the body right away as I'm not a big fan of the stock body (no offense) and modded the body mounts to fit it. This is my first hobby grade rc (1/16 exceed doesn't even count) and first rc paint job. After a few runs and some researching I decided to get some trenchers on f-11 rims to complete the look. I'll keep the maxx tires for snow bashing as they are pretty good in the snow. Not planning on upgrading to brushless anytime soon as this truck is plenty for me... am pondering a light kit as a final upgrade though...

[Drty42]

Here are some pics of my stampede 4x4
Pro line body mount
Proline chevy 2500 HD body
Proline trenchers
Burned up brushed motor upgraded to traxxas brushless

[Stampeter]

Added some lights to my Stampede

[Stampeter]

Some close-ups. I used shoegoo to glue them to the body.

[Stampeter]

New paint job
Supposed to be purple but my samsung makes it pinkish

[Stampeter]

Photoshopped a picture to the right color:

[brog1411]

Getting ready to play around tomorrow wasn't happy with the stock tires in the snow. So I pulled the sand paws from my rusty.

[Bricks50]

Took it out today in the snow.

[CounterTrey]

Hello. I thought after reading a while and lurking I'd finally chime in and share a little. I'm 45 and started RC back in the 80's with Tamiya 2WD buggies. Didn't take long for me to start spending though and I upgraded to a Kyosho Optima Chain driven (still have it less with than 10 hours of total run time on it). For some reason I mothballed it then and stepped away until this December when my 2 boys and I all got Stampedes for Xmas. 2 straight 4x4's and one 4x4 VXL TSM. It's kind of hard to quantify my reaction other than "WOW!". Not only are these things incredible as RTR machines, but I am just totally blown away at how far the industry has come since the 90's. It's literally overwhelming. I mean slipper clutches? Just wrapping my head around possible repairs/upgrades has my head spinning. Luckily there is an awesome community like this one.

Anyhow before this turns into a long stream of consciousness I'll just post some pics of the trucks. I'm obviously still learning the hard way with a lot of the body painting. Getting masks right and knowing mow much is too much is easy to mess up...ONCE! The one I'm working on now for my son has killing me...Flames with borders are TOUGH! I'll post a pic once it's done. He wants a black truck with pink and red flames.

[jbobb1]

First time paint job. Not the greatest, but ok.

[stillsmokin875]

[SummitonSlingrs]

First I had to dump the body




Then painted up a C10 Body


And topped it off with some Trenchers.


Had an old Jeep RC laying around tore the body off fitted to the P4DE and painted it white.

[Gunslinger45]

A True Stampede! I got the 4x4vxl and then my wife and youngest daughter decided to get the 2wd version as well. Only upgrades so far are the Swampers.

[SummitonSlingrs]

Nice. Any pics with the Jeep body?

Thank you CounterTrey!

Yes. I didn't have the Trenchers on when I took the Pics though.






This is a pic of the Original RC I took the body off. There was a lot of trimming to say the least.

[thetech]

First time painting an RC shell.

[IPT]

My most recent body .

[IPT]

Older body...







A really old body. First one I ever painted .