Results 1 to 3 of 3
  1. #1
    RC Competitor
    Join Date
    Nov 2010

    Do I need to set anything on the ESC when using Lipo?

    I have used lipo since the day I got the truck but am wondering if I need to set the LVC on the ESC or if it is pre programmed already?

  2. #2
    RC Competitor
    Join Date
    Jan 2011
    Nova Scotia
    It is NOT set from the factory... Page 17 of the manual.

    Factory setting is not LiPo mode with low voltage detection. To set it:
    1: make sure the led on the ESC is on and red.
    2: Press and hold the ez-set button for 10 seconds. The Led will turn off and then light green. Also a "rising" musical tone will be emitted from the motor.
    3: Low-voltage detection is now activated.

  3. #3
    RC Turnbuckle Jr.
    Join Date
    Jun 2010
    Miami, Fl
    lipo mode = green led on the esc, stock setting is nimh = red led.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts