Linking 5908 Emaxx to 5607 Summit Tx

[traxxasbrisbane]

Hi everyone. Im trying to Link my E maxx to my Summits Transmitter so I only have to carry around one but it just wont bind. Is it physically possible to do so??? I linked my E revo to the emaxx fine but the Summits Tx wont seem to. Any advice would be appreciated. JT

[JimmyNeutron]

What is the part number of the receiver on the eMaxx?

Is this the procedure you are using?

1) Make sure all batteries are in good working order
2) Put a battery in your RC
3) Open up the Rx box. (Rx = receiver)
4) Press and hold "SET" on the Tx. (Tx = controller = transmitter)
5) Turn the Tx on.
6) Confirm the red blinking LED on the Tx,
7) Press and hold the LINK button on the Rx in the RC you want to control.
8) Turn on the RC
9) Confirm that everything is bound together via green LED shown on both the Rx and Tx.

[traxxasbrisbane]

Hey Jimmie, Yeah I can Link it fine to the E Maxx but the TX wont store more than one model at a time. I have 3 Traxxas vehicles and Traxxas TX can store up to 20 models on the single controller but the Summits Tx wont store multiple vehicles for some reason. It only wants to have one vehicle bound. Cheers

[JimmyNeutron]

Huh... never had any issues like that with mine.