Stopped by my local hobby store to check out the motor/ESC and finally pulled the trigger and bought the CC 3800kv comboalso went ahead and bought the castle link USB . Pretty straight forward install ??
Your going to have a lot more fun now that your brushless I went w/ the vxl system and 2s lipo but installing is a piece of cake the whole usb thing I don't know about My next truck and system I'm going to try out a castle
Are you soldering the connector?
Yep straight forward
Have fun with that![]()
Slash 2wd, Slash 4x4, 30th digger, Rustler VXL
I got these lipos with the truck. Ok ?
I hear 30-40c rating is good
30C is not bad, and Orion in general makes **** good stuff.
Give it a go and see what you think![]()
You could ask your lhs, some solder for free
I have puffed 25c's with the 3800,and one 30c venom,I think the venom was bad to start with,for the most part,I run my 3800's on 65c,they do fine on 35c thunder power,but going to 65c is like going to 3s.
Built Ford Tuff With Chevy Stuff.
I wanted to order these
http://www.spcracing.com/index.php?productID=59
Remember I'm pretty sure the venom was bad any way,3800 are amp hogs,they run fine on 30c but,like i said if I run one of my 65c packs Its twice the motor.
Built Ford Tuff With Chevy Stuff.
http://www.spcracing.com/index.php?productID=121
Gonna order that for fun![]()
Good choice ^^
Slash 2wd, Slash 4x4, 30th digger, Rustler VXL
http://www.spcracing.com/index.php?productID=121
Gonna order that for fun![]()
yea,like kdvanb said,they should have done it for you,my boss would be peeved if I didn't offer to do it.
Built Ford Tuff With Chevy Stuff.
The connector costs like 4$
Slash 2wd, Slash 4x4, 30th digger, Rustler VXL
I give them away,and for the minute it takes to do,it makes for a happy costumer.
I don't work for the lhs,I just do stuff when he gets backed up,But now I have people calling me first,OK for now,but not when racing season starts.
Built Ford Tuff With Chevy Stuff.
I gotta ? so does having a higher C rating make your motor perform better
Seeing as those battery's are only 4k mah at 30c it might be an issue. I would recommend at the least a 5k mah 30c battery. Also your gonna need double sided tape or something to mount that esc on your truck. I know I had to buy the plastic mounting piece for mine and then use double sided tape to stick the esc to it.
The mah # is just the gas tank,A 4000mah,and a 8000man battery both 30c,will perform the same,One will just have twice the run time.
The c rating is how much power the battery can give the motor when it wants it, a50c 2s should have a 100c burst rate(short time power shot)
That's why a 3800 will run on a 25c,but if you keep asking the battery for more,it cant do it,since it has only a 50c burst rate, and the 3800 likes at least 30c minim ,35c better continuous, that gives you a 60 to 70c burst.
With a 6500mah 50c,you should get a good 40 minute run,that's running it pretty good.
Personally my 6500mah 65c battery's,are what I like running in my cc systems, where the velineon pulls about 65 amp contentious, the 3800's pull around 150 amps ,but 50c will be fine,in fact I often run mine on 35c,the only difference imo,is they don't have that short term punch I like ,or at times need.
Last edited by billy-bones; 02-03-2013 at 08:23 AM.
Built Ford Tuff With Chevy Stuff.