Rally-Pede

[gullyjumper]

I have a pede 4 and want to change it into a rally car. I have seen the pede to slash conversion but really don't want to go that way and have seen slash to rally also.So what do I need to do pede to rally other than wheels and body? Part numbers ,pictures of this conversion if you have them. Thanks for any help you can give!

[humayrayakongkinaon]

so what is it you really want to do cause you said, "I've seen the pede to slash conversion but really don't want to go that way and have seen slash to rally also" and then you said, "what do I need to do pede to rally other than wheels and body" im confused? or is it the other way around?

[gullyjumper]

I want to change my 4x4 stampede to a rally car using the pede chassis.

[humayrayakongkinaon]

all you got to do is lower your truck and get the wheels/tires from rally...... the front bumper/support...but here the thing though, your pede chassis is shorter than the rally chassis.

[Jws1982]

Yeah you'll need to swap to the new LCG chassis too.

Or, you could search for a body that would fit the shorter chassis with the rally front and rear bumpers on it.

[humayrayakongkinaon]

i seen the Jang reviews on youtube about the rally 1/10 with their sizes and all.....i think you might be able to use other rally body for that pede chassis.

[pavmentsurfer]

the LCG chassis has a different rear bulkhead, front chassis brace and steering linkage. It also uses a different RX box and battery hold down setup, motor mount, motor plate... youd need all that to swap to an LCG slash/rally chassis. The pede is substantially shorter than the slash/rally so the body will not fit at all.

[4-wheelin]

Here ya go!!!
My entire post is HERE


6855 Driveshaft
7426 Battery hold down
Or 7426x Expanded battery hold down
7436 Bumper foam
7424 Receiver box
7422 Chassis
7423 Nerf Bars
7437 Front skid
7430 Front Bulkhead
7438 Linkage
7429 Rear Bulkhead
7477 Gear Cover
7460 Motor Mount
7490 Motor Plate
7415 Rear Body Mounts
6416 Front Body Posts.
2577 (2 packs) nerf bar screws
3937 Screws to hold front bumper to the bulkhead

[gullyjumper]

Thanks to all