Weak points...

[kdvanb]

Okay guys I know your thinking.. Awww not one of these again

But this ones different..
So these are my current upgrades..
-avid bearings all around
-rpm rear shock tower
-wheelie bar..
-castle mmp and 3800kv motor.
Think that's all..

And so Im buying a STRC skid.. 16.50$
So I need a relatively cheap part to get me over the 20$ mark.
Why the 20$ mark..

Because for every purchase over 20$ my LHS gives you a stamp and once there are 10 stamps on your card you get 20% of your next purchase

So I just need a rpm part or something

So just list all the parts you have broke from day one
The most common break.. *other then rear carriers and castor blocks and steering blocks
Will be on my wants list
If they don't have the #1 most broke part I'll ask for whatever comes as #2
Thank and all answers appreciated

[dcsally97]

Buy the anodized TRX wheelie bar wheels. They are a fantastic upgrade.

[kdvanb]

Okay.. But I need something else.. Not just for looks..
My wheelie bar hasn't even been used yet

[reod12x2]

rpm gear cover?
aluminum shock caps?
tie rods?
more spur gears for this summer heat?
hex screws?
servo tape(always handy)?

[Oaks]

Since we're talking rpm stuff, go ahead and get the arms for front and rear befOre the protrac kit really took off, everybody had a lot more rpm hooked pede's. I know I did. If you can live with a wider truck, that doesn't need tires rotated.. Rpm arms with nitro front carriers and spindles from a rustler will widen and level the front an rear. You'll need nitro front wheels too, but that's just as wide as a protrac'ed rc and rear toe can be achieved withthe rpm gear box. Wheel selection becomes limited, tho. Bit still. You can bust right thru the 20$ budget, get wide, upgrade in your own right and do it with rpm.

[kdvanb]

rpm gear cover?
aluminum shock caps?
tie rods?
more spur gears for this summer heat?
hex screws?
servo tape(always handy)?

I got a lot of spurs.. Like 30
And I'm slowly going to hex screws.. I've already bent 3 of the philippes
I guess I can go with screws
Or aluminum shock caps will be nice but I doubt there will be green ones..
I just want durability upgrades..
Maybe tie rods

[reod12x2]

if you have $60+ you could get a pro track kit and get roughtly 3 stamps at once

[kdvanb]

if you have $60+ you could get a pro track kit and get roughtly 3 stamps at once

No it's 20$+
And one stamp a day..
Trust me if I could do that I would have
(3000/20=150 stamps) that means 15 full 20% off certificates
I wish..

[reod12x2]

wow you have $3k of avalible money on you?....holly what your job

[kdvanb]

wow you have $3k of avalible money on you?....holly what your job

Uhh..
I worked for my dad in the summer and got 6$ an hour
Then I had bull calves, raised then by myself..
Sold all 15 made 5000$ profit..

[kdvanb]

Since we're talking rpm stuff, go ahead and get the arms for front and rear befOre the protrac kit really took off, everybody had a lot more rpm hooked pede's. I know I did. If you can live with a wider truck, that doesn't need tires rotated.. Rpm arms with nitro front carriers and spindles from a rustler will widen and level the front an rear. You'll need nitro front wheels too, but that's just as wide as a protrac'ed rc and rear toe can be achieved withthe rpm gear box. Wheel selection becomes limited, tho. Bit still. You can bust right thru the 20$ budget, get wide, upgrade in your own right and do it with rpm.

Ehh..
It's a good idea but not what I want..
Maybe just the rpm arms

[dugsguns]

Rod ends, if u dont have a pack of em , nows the time to grab em. It comes in handy when yer doin those wide mods to slap the longer/shorter end on to make up the difference.

[kdvanb]

Okay I got my parts
Got home and put 2 packs threw...
Boom! Rear carrier goes..
Lucky I have spare rpm's

[kdvanb]

It was funny too..
54 mph.. Tiniest bump.. Uhh what's that..