help, I have a problem in OptiDrive

[lf-wolf@hotmail.com]

sorry guys, I do not speak English and so I'm using google translator

My problem in this OptiDrive, he's at 70% front and 100% aft, can someone help me get it back to normal? already looked in the manual, but does not explain very well

[rock-rod]

The throttle/brake servo needs to be reversed using the transmitter.

[lf-wolf@hotmail.com]

The throttle/brake servo needs to be reversed using the transmitter.

first thanks for replying, but I've reversed the servo at the transmitter but not worked, have to reverse the opti drive, and how do I do this??

[RevoDeano]

sorry not really to sure what the issue is. the translation is not great, have you tried resetting the opti drive and going through the setup again?

[lf-wolf@hotmail.com]

sorry not really to sure what the issue is. the translation is not great, have you tried resetting the opti drive and going through the setup again?

from what I understand, if agent holding the button set of the OptiDrive, it will blink green 2 times and then it flashes red once that the Normal setting, but if it flashes 2 times as in my case he is unlike, as I to do it flashes 1 time only?

[lf-wolf@hotmail.com]

help , help , help
http://www.youtube.com/watch?v=rgc96OOu0g0

[lf-wolf@hotmail.com]

help help help

[Double G]

Based upon the video (which I don't understand what you are saying, sorry) it appears everything is working normally. Is the problem with the carb opening 70% in forward and 100% when the transmission is in reverse? If so, how do you know the throttle is opening up 70% forward and 100% reverse? Best way to check is to remove the air filter and verify that when in forward and reverse the carb opens all the way.

[lf-wolf@hotmail.com]

Based upon the video (which I don't understand what you are saying, sorry) it appears everything is working normally. Is the problem with the carb opening 70% in forward and 100% when the transmission is in reverse? If so, how do you know the throttle is opening up 70% forward and 100% reverse? Best way to check is to remove the air filter and verify that when in forward and reverse the carb opens all the way.

that's right 70 forward, aft and 100%, how to make original again?

[lf-wolf@hotmail.com]

help , help , help

[Ozrevoguy]

Reset it drive reset transmitter

[Ozrevoguy]

I mean, reset the optidrive and the transmitter

Sent from my GT-I9300T using Tapatalk 2

[lf-wolf@hotmail.com]

Reset it drive reset transmitter

I already did that

[Ozrevoguy]

Hold down your optidrive reset, pull throttle all the way back then release. Light on optidrive should blink green twice to confirm.

[Ozrevoguy]

Also make sure your servo horn for your throttle is mounted on the engine side correctly.. It can go in 2 places, if it's on the wrong spot it will throw it out

[lf-wolf@hotmail.com]

http://www.youtube.com/watch?v=rgc96OOu0g0

[Ozrevoguy]

I'm out

[lf-wolf@hotmail.com]

how to reset the optidrive ?

[kgombe1]

just get rid of the opti drive

[majichammer]

just get rid of the opti drive

That's the best advise you can get, install a FOC and enjoy a reliable tranny!

[revo_stevo]

Push and hold reset button until it links green 2 times then let off the button..pull full throttle and hold it until light blinks three times..then let trigger go to neutral..after a few seconds both lights will come on indicating programming is complete..