After ruling out as much parts as I can, I finally found out the reason behind my wheel wobble that may help someone out here. My problem was as simple as the bolt that holds the wheel to the CVDs. The flange on the bolt was not round enough, it was more like an oval. When I tighten the bolt down onto the wheel the flange on the bolt would push against the inside area of the wheel and push it off center, creating a wobble. I had one bad wheel wobble and when I changed that bolt to another wheel, without moving the wheel and only the bolts, I was able to re-create the wobble on any wheel the bolt was on. I filed down the flange on the bolt and no more wobble! Hope this helps someone. Not sure where to upload images at this time.