Results 1 to 3 of 3
  1. #1
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,138

    STRC rear shock tower install help

    Im not really sure where all the screws go

    I have
    5x the screws that attach it to the transmission and chassis
    *one of these are an extra or?*
    2x the flathead screws that attach the shock tower to the base plate
    2x screws for camber links to shock tower

    I have like 4 or five other screws, silver in colour and I'm not sure where these go

    I also have 2 circular aluminum pieces, not to sure what they are for?

    Thank for any help
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

  2. #2
    RC Racer DragonInside's Avatar
    Join Date
    Mar 2009
    Location
    Tijuana, MX
    Posts
    169
    I have that tower. If I remember from the package, there's 2 small countersunk screws that go on the bottom of the shock tower and hold another piece of aluminum that bolts to the tranny and chassis. Those 2 little aluminum pieces go through the shock caps and are held by 2 long Phillips screws (they're horrible, they come lose often and are fairly easy to strip). 4 button-head screws bolt on to the frame and trans.

    That's all you need, I used the same long screws for the turnbuckles.
    I'm not driving fast, I'm flying low.

  3. #3
    RC Turnbuckle Jr. kdvanb's Avatar
    Join Date
    Aug 2011
    Location
    Grassie Ontario Canada
    Posts
    3,138
    Thank you that helps
    Slash 2wd, Slash 4x4, 30th digger, Rustler VXL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •