Results 1 to 10 of 10
  1. #1
    RC Racer
    Join Date
    Dec 2010
    Posts
    130

    any tellys running mip axles

    i keep breaking the stock axles
    any one runnin mip axles

    i was looking at them and if you do the race duty aluminum or steel they have 3 cars listed for one part number slash/stampede/rally no i did the slash/stamped arm upgrade no when i look at the xduty axles there is different part numbers...

    has anyone ran into this

  2. #2
    RC Competitor
    Join Date
    Jan 2013
    Location
    Omaha, NE
    Posts
    83
    I wouldn't think they'd fit as the Telly has shorter a-arms that the Stamp or slash. If you converted to Stampede or Slash a-arms they would fit, no issue. Have you tried the HD shafts meant for the stampede? They might fit if you cut them down.

  3. #3
    RC Champion
    Join Date
    Jun 2003
    Location
    We-Go, Chicago, IL
    Posts
    2,902
    Has anybody gotten any further on this topic? I've managed to get a ton of steering angle out of mine and now the u-joints bind like mad, and I haven't even had the chance to crawl it much yet, let alone with the extra throw.
    https://www.instagram.com/greenjeep1998/?hl=en

  4. #4
    RC poster
    Join Date
    Jul 2014
    Posts
    10
    I have a Telly with MIP. Also have rpm stampede 4x4 arms

  5. #5
    RC Champion
    Join Date
    Jun 2003
    Location
    We-Go, Chicago, IL
    Posts
    2,902
    I'm wanting to keep the suspension arm length stock with the extra shallow offset rims to try and keep it more "scsle-ish" looking.
    https://www.instagram.com/greenjeep1998/?hl=en

  6. #6
    RC poster
    Join Date
    Jul 2014
    Posts
    10
    Don't know what to tell ya. Don't think they make them short enough. Look for the length of Stampede 4x4 rear cvds and see if that fits

  7. #7
    RC Champion
    Join Date
    Jun 2003
    Location
    We-Go, Chicago, IL
    Posts
    2,902
    Actually, those Are the same, and the ones for the Nitro Rustler/Pede/Sport are nearly too (I think the part number is the only difference), I think the MIP X-Dutys for the 4X4's will work, but I haven't been able to get a set near my truck for comparison. Also found that my binding wasn't the u-joints, it was the Trenchers grabbing the springs and retainers as well as the rims grabbing the knuckes, so I dialed in some toe-out and now only have the rim vs knuckle bind to deal with.
    https://www.instagram.com/greenjeep1998/?hl=en

  8. #8
    RC poster
    Join Date
    Feb 2014
    Posts
    17
    So mine is brushless, 4000kv motor, 17mm hubs, 1/8 ebuggy badlands. I need something stronger for shafts. So there is nothing beefy out there for stock length arms? Not even something from another brand? Maybe something I can cut down if they are too long?

  9. #9
    RC Enthusiast
    Join Date
    Mar 2014
    Posts
    20
    Quote Originally Posted by Exojoe View Post
    So mine is brushless, 4000kv motor, 17mm hubs, 1/8 ebuggy badlands. I need something stronger for shafts. So there is nothing beefy out there for stock length arms? Not even something from another brand? Maybe something I can cut down if they are too long?
    traxxas telluride steel drive shafts: http://youtu.be/D8PT1b35brQ

  10. #10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •