Results 1 to 10 of 10
  1. #1
    RC Qualifier
    Join Date
    May 2006
    Location
    FL
    Posts
    759

    SPC Lipo's back in stock- Which ones fit without mods?

    Does anyone know know which ones of the SPC brand fit the E-Maxx 3908 without any mods? I'm looking at this one http://spcracingbatteries.com/index....&product_id=58

  2. #2
    RC Qualifier
    Join Date
    Dec 2011
    Posts
    442
    most of them should fit. That one should too. There are measurements you could try...

  3. #3
    RC Qualifier
    Join Date
    May 2006
    Location
    FL
    Posts
    759
    The issue I see is the 30mm tall, I thought the stock battery bars were up to 25mm and the extended was 28mm tall

  4. #4
    RC Qualifier
    Join Date
    Dec 2011
    Posts
    442
    ok you could get away with that by using Velcro straps to hold it down.

  5. #5
    RC Champion skmfkr's Avatar
    Join Date
    Mar 2014
    Location
    Savannah, GA
    Posts
    1,502
    idk about the emaxx but my other traxxas vehicles i think 29mm is the tallest. the spc or smc 3s 4300 will work. thats what i went with. or like the guy above said use straps

  6. #6
    RC Qualifier
    Join Date
    Dec 2011
    Posts
    442
    Ok so I just got my spc hardcase 6500's and they needed modification on the battery hold downs. I used a dermal to cut the hold downs. It was pretty easy.

  7. #7
    RC Qualifier
    Join Date
    May 2006
    Location
    FL
    Posts
    759
    The 6500mah says it's 48mm tall, your telling me just a dremel solved it and was able to fit the height? Can you post pictures?

  8. #8
    RC Champion
    Join Date
    Aug 2010
    Location
    new hampshire
    Posts
    1,771
    I have the 2s 6500s and they fit without any mods.In my 30895. e maxx
    just flip over your battery hold downs so you are using the 28 instead of the 21. The numbers on the hold downs.

  9. #9
    RC Qualifier
    Join Date
    May 2006
    Location
    FL
    Posts
    759
    There is HUGE height difference between the 2S and 3S 6500mah, the 2S is only 24.5mm high vs 34.5mm for the 3S
    Last edited by Xboxmember1978; 06-23-2014 at 07:36 PM.

  10. #10
    RC Champion
    Join Date
    Aug 2010
    Location
    new hampshire
    Posts
    1,771
    Sorry my bad.I though you were running 2s lipos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •