Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    Jun 2014
    Location
    Guam USA
    Posts
    6

    replacement servo

    i believe that my throttle servo has lost its water tight integrity and its starting to act up. wondering what is a good replacement for it

  2. #2
    RC Turnbuckle Jr. JerrysMaxx's Avatar
    Join Date
    Jul 2014
    Location
    NAWLINS
    Posts
    3,952
    What is it doing? I have not had any issues with the throttle servo only the steering servo.
    You may have just stripped a gear in the servo. Easily replaced. If you opened the servo up and did not have the seal properly placed you may have got a little water in it. If the electronics are bad I would just get another one like it and call it bad luck.
    I use the Futaba 3305 (not water proof) for my steering and rebuilt the gears on the 2075 and use it for the throttle/brake.
    Using the 2075 on the throttle/brake helps in braking. I also use this setup in my Maxx's.

  3. #3
    RC poster
    Join Date
    Jun 2014
    Location
    Guam USA
    Posts
    6
    well when i would throttle up it would rotate all the way and about 5 seconds later it would go from half way to full constantly and you can hear the servo making some weird noise inside of it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •