Fpv install on aton

[MKSNIPER2017]

Sent from my iPhone using Tapatalk

[MKSNIPER2017]

Sent from my iPhone using Tapatalk

[casper3oaks]

Super Sweet looking setup ya got there MK! Now we just need some flight video and a range test from that Beast!

[MKSNIPER2017]

Stay tuned! lol


Sent from my iPhone using Tapatalk

[Thekingsky]

Stay tuned! lol


Sent from my iPhone using Tapatalk

Very nice installation

Curious to show in action, particularly concerning latency of OSD ?

Thank you for your contribution to this thread

[MKSNIPER2017]

I'll do some testing and let you know asap


Sent from my iPhone using Tapatalk

[maxmini]

Really beautiful work !

[MKSNIPER2017]

https://www.ebay.com/itm/322563747222


Sent from my iPhone using Tapatalk

[Fordfreak95]

Sent from my iPhone using Tapatalk

Hi
I am green to FPV and extending range but not green to soldering and wiring.....so......How did you solder the coax to the PCB in place of the stock antenna. I have done this twice now (I have 3 transmitters) with a powered antenna & unpowered 3dbi,6dbi and 9dbi and have not increased range one bit. I have dissected the board and the socket the stock antenna is soldered to is grounded. So there is no way to keep the antenna and shielding of the coax open/unconnected. I am starting to wonder if the transmitters that do work with this are older versions. All mine are new. I did mine like this:
https://www.youtube.com/watch?v=DLPQwcozOOA&t=25s

Thanks for any and all help/tips/or educating me.

[MKSNIPER2017]

Hi
I am green to FPV and extending range but not green to soldering and wiring.....so......How did you solder the coax to the PCB in place of the stock antenna. I have done this twice now (I have 3 transmitters) with a powered antenna & unpowered 3dbi,6dbi and 9dbi and have not increased range one bit. I have dissected the board and the socket the stock antenna is soldered to is grounded. So there is no way to keep the antenna and shielding of the coax open/unconnected. I am starting to wonder if the transmitters that do work with this are older versions. All mine are new. I did mine like this:
https://www.youtube.com/watch?v=DLPQwcozOOA&t=25s

Thanks for any and all help/tips/or educating me.

I just used my multimeter and soldered the range extender to the same ground the original antenna was ground to.


Sent from my iPhone using Tapatalk