Results 1 to 10 of 10
  1. #1
    RC Competitor
    Join Date
    Sep 2017
    Posts
    76

    17 mm hubs pins don't fit ?

    Got me a set of hubs but pins that come with it don't fit my telluride , they are slightly to large anyone had any luck or mod to fit , should I drill the axle pin hole ? Or are they only good for like a Summit or ERevo ?
    Any idea ?

    Sent from my ONEPLUS A5000 using Tapatalk

  2. #2
    Traxxas Employee nixhex32's Avatar
    Join Date
    Mar 2001
    Location
    Ft Worth, tx
    Posts
    481
    Those are for the big trucks like the emaxx or revo. You should have gotten 6856x.
    Slash 4x4 lcg(heavily modded), Telluride(modded)gone, TCP, Monster Buggy, Latrax SST(heavily modded), Spartan, "My Summit" pic of that posted in the gallery........and some other things.

  3. #3
    RC Competitor
    Join Date
    Sep 2017
    Posts
    76
    Quote Originally Posted by nixhex32 View Post
    Those are for the big trucks like the emaxx or revo. You should have gotten 6856x.
    Ok thanks

    Sent from my ONEPLUS A5000 using Tapatalk

  4. #4
    RC poster
    Join Date
    Sep 2016
    Posts
    13
    Quote Originally Posted by nixhex32 View Post
    Those are for the big trucks like the emaxx or revo. You should have gotten 6856x.
    Do you know if the 6856x kit will work with the MIP axles?

  5. #5
    Traxxas Employee nixhex32's Avatar
    Join Date
    Mar 2001
    Location
    Ft Worth, tx
    Posts
    481
    Quote Originally Posted by joe419 View Post
    Do you know if the 6856x kit will work with the MIP axles?
    No idea, best bet is to call MIP and see what they say.
    Slash 4x4 lcg(heavily modded), Telluride(modded)gone, TCP, Monster Buggy, Latrax SST(heavily modded), Spartan, "My Summit" pic of that posted in the gallery........and some other things.

  6. #6
    RC Racer
    Join Date
    Apr 2014
    Location
    Ghent, Belgium
    Posts
    126
    Quote Originally Posted by joe419 View Post
    Do you know if the 6856x kit will work with the MIP axles?
    No, the 6858x kit won't work with MIP axles.
    Traxxas stock/cvd axles use a axle pin (12mm hexes, with the 17mm hexes this is a screw) to hold the hexes onto the axles.
    MIP uses keyed axles, without a hole to put the axle pin through. (the older version MIP axles did, but this turned out to be a weak spot on the axles, so the current design has omitted the holes, in favor of a keyed design).

    You can use MIP 10115 17mm hex adapters or Hot-Racing SLF17R06 serrated 17mm hex adapters
    P4de, G.D., K.Block, K. Busch, Summit, ERBE, TRX-4

  7. #7
    RC poster
    Join Date
    Sep 2016
    Posts
    13
    Quote Originally Posted by degake View Post
    No, the 6858x kit won't work with MIP axles.
    Traxxas stock/cvd axles use a axle pin (12mm hexes, with the 17mm hexes this is a screw) to hold the hexes onto the axles.
    MIP uses keyed axles, without a hole to put the axle pin through. (the older version MIP axles did, but this turned out to be a weak spot on the axles, so the current design has omitted the holes, in favor of a keyed design).

    You can use MIP 10115 17mm hex adapters or Hot-Racing SLF17R06 serrated 17mm hex adapters
    Thanks for the useful info

    Sent from my SM-G930P using Tapatalk

  8. #8
    RC Qualifier
    Join Date
    Mar 2013
    Location
    SoCal.
    Posts
    719
    Hot racing WH17HT01 is what you want. They sit on top of the mip 12mm hex.



    Here is a pic, I know its a slash but I do use the adapters I mentioned.
    Last edited by Miltdoggie; 10-26-2017 at 11:47 AM.
    IG: @818sFastestRC
    Slash 4x4 138MPH

  9. #9
    RC poster
    Join Date
    Sep 2016
    Posts
    13
    Quote Originally Posted by Miltdoggie View Post
    Hot racing WH17HT01 is what you want. They sit on top of the mip 12mm hex.



    Here is a pic, I know its a slash but I do use the adapters I mentioned.
    So does this change the offset of the wheels at all?

    *EDIT

    I see on their specs it adds 10mm if anyone else is curious.

    Sent from my SM-G930P using Tapatalk
    Last edited by joe419; 10-26-2017 at 02:22 PM.

  10. #10
    RC Turnbuckle Jr.
    Join Date
    Feb 2002
    Posts
    8,732
    it will add width to your setup, but whatever ofset you have on your wheels is on your wheels

    I have the +6mm version the HR setup is sweet. I run the MIPs with the keyed 12mm hexes and use the 17mm conversion on my slash lcg 4x4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •