Page 4 of 12 FirstFirst ... 23456 ... LastLast
Results 121 to 160 of 453
  1. #121
    RC Competitor
    Join Date
    Apr 2018
    Posts
    84
    Found the Molotow pen on Amazon and ordered one. Thanks!!

  2. #122
    RC Competitor
    Join Date
    Mar 2018
    Location
    So Cal
    Posts
    84
    Replaced the steering servo after barely 1 hour of backyard fun. Didnít even finish the 1st set of 4s 7600 mAh batts. Be aware of some aftermarket servos are too big to replace traxxas servo. Hobby store learned also. Back in business again ! Truck is Bad ***!!


    Sent from my iPhone using Tapatalk

  3. #123
    RC Competitor
    Join Date
    Mar 2018
    Posts
    74
    Installed a LED on/off circuit on my 3rd channel.

  4. #124
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    Quote Originally Posted by TangoSauce View Post


    I made some links last night to make it a Hardtail UDR for novelty. The rear is extended fully. Itís pretty weak looking so no jumping. I havenít drove it yet.
    I made something like this.

    Trail runner. Lol

    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  5. #125
    RC Qualifier
    Join Date
    Jan 2018
    Location
    North Texas
    Posts
    398
    I think an escalade trophy truck would look really cool. It'd be different for sure
    Guess who's back.
    Back again.

  6. #126
    RC Competitor
    Join Date
    Mar 2018
    Posts
    74
    Fourdub mine bounced around on tire pressure.

  7. #127
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    This is not fixed, just body lifted to reduce rub, i think it should go anywhere a trail runner can go. its obviously not a crawler, but for forest paths, and such I'm sure it'd be great. thanks Sprinkletron.
    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  8. #128
    RC Competitor
    Join Date
    Mar 2018
    Posts
    63
    I wish I could say or contribute to the thread but we lost everything we own in a house fire on Sunday.udr ran 4 Times slash maybe ran3 times brand new , bronco never ran ...everything!!

    But we’re alive so we have everything.

  9. #129
    RC Racer
    Join Date
    Apr 2017
    Posts
    161
    Iím sorry man, thatís tough but like you said, you and your family are okay, the other stuff can be replaced


    Sent from my iPhone using Tapatalk

  10. #130
    RC Competitor
    Join Date
    Apr 2018
    Posts
    84
    Wow! That's terrible. Very sorry to hear. Glad everyone's OK and hope that you are able to get the house and things replaced.

  11. #131
    RC Competitor
    Join Date
    Mar 2018
    Location
    So Cal
    Posts
    84
    Sorrry to hear about that, good to hear you and youíre family are ok.


    Sent from my iPhone using Tapatalk

  12. #132
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    sorry to hear about your loss man.
    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  13. #133
    RC Competitor
    Join Date
    Mar 2018
    Posts
    63
    Thanks guys. I’m just dying to tinker with an rc car

  14. #134
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    private message me, your address i'll "lend" ya a rustler. give you something to take ya mind off the other thing.
    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  15. #135
    RC Competitor
    Join Date
    Mar 2018
    Posts
    74
    Nothing because I have to remove the body to re-bind the radio system again. I've been trying to use my 5ch TRX-4 TX for both models but it always loses the last model bound. errr! It's not worth the trouble, I'll be binding it back to its own 2ch TX next time.

  16. #136
    RC poster
    Join Date
    Apr 2018
    Posts
    7
    Hello Guys new to the forum here, but ive had my UDR for about 3 weeks, ive replaced countless Trailing Arms, added a sleeve to upper links, replaced Servo, Replaced Front Drive Shaft. added light bar, but i beat on it like it owes me money.


    Last edited by 5PNT0; 04-24-2018 at 12:45 PM.

  17. #137
    RC Competitor
    Join Date
    Mar 2018
    Posts
    74
    Led bars are looking good 5PNT0.

  18. #138
    RC Competitor
    Join Date
    Mar 2018
    Posts
    63
    Quote Originally Posted by fourdub View Post
    private message me, your address i'll "lend" ya a rustler. give you something to take ya mind off the other thing.
    Your the frickin man ...man thanks for that. I’m geting things back in order and some new vids will be coming soon ..
    Thanks again richard. There’s not enough people like you sir.

  19. #139
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    No problem Shelbydave!

    Me and crazyxmaxx out bashing UDR's at the foxtail track.





    we went topless, and crazy deaccessorized his UDR.











    Good times. Did break a trailing arm on the rigid truck.

    used some generic 35c 4s battery, and it really woke the UDR up, over the traxxas 25c packs.

    Video to come sometime later.
    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  20. #140
    RC Competitor
    Join Date
    Apr 2018
    Posts
    84
    Awesome!

    These broken trailing arms are becoming common.

  21. #141
    RC poster
    Join Date
    Apr 2018
    Posts
    7
    i filled the stock trailing arms with some Quick Steel and they've been holding up

  22. #142
    RC Competitor
    Join Date
    Mar 2018
    Posts
    74
    I’ve done nothing to mine and they’ve been fine.

  23. #143
    RC Competitor
    Join Date
    Mar 2017
    Posts
    95
    Everytime it traction rolls, I cringe and look to see if I broke one. But so far so good.

  24. #144
    RC Competitor
    Join Date
    Apr 2018
    Posts
    84
    We should replace the spare driveshaft on the back with a spare trailing arm. Ha

  25. #145
    RC poster
    Join Date
    Aug 2017
    Posts
    12
    Just installed an led light bar....Its meant for Axial vehicles but its licensed by Rigid Industries so it was only right that it went on the UDR.
    Part # AX31152 - Universal Rigid Light Bar kit
    Part # AX31098 - 8 Led Light String ( white )
    Part # AX31097 - 3 Port High Output Led Controller
    Universal On/Off Led Switch
    Also while I had the body off to install the light bar kit I put Gorilla tape on the inner fender wells to keep the the tries from rubbing the paint off.

    Sent from my SM-N950U using Tapatalk

  26. #146
    RC Competitor
    Join Date
    Mar 2018
    Posts
    74
    Sweet bar! I reinforced all my body holes with gorilla tape.

  27. #147
    RC Qualifier
    Join Date
    Mar 2016
    Posts
    834
    Ran UDR’s at the track today with fourdub = a total blast
    Had a 31t pinion installed that worked great
    Go Traxxas

    Just get out there and play
    fabricator

  28. #148
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    yesterdays run with crazyxmaxx.

    slash, slash, udr, maxx, maxx, udr


    standard traxxas 17mm hex mod.





    more info here
    https://forums.traxxas.com/showthrea...ex-Conversions

    D-hawk metal trailing arms
    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  29. #149
    RC poster
    Join Date
    May 2018
    Posts
    2
    Quote Originally Posted by CrazyXMAXX View Post
    Ran UDRís at the track today with fourdub = a total blast
    Had a 31t pinion installed that worked great
    Go Traxxas

    Just get out there and play
    What track did you guys go play at.... we should have a big SoCal UDR gathering!

  30. #150
    RC Qualifier
    Join Date
    Mar 2016
    Posts
    834
    Open track - Foxtail field
    In Reche Canyon
    Run what ya brung
    fabricator

  31. #151
    RC Qualifier
    Join Date
    Mar 2016
    Posts
    834
    Happy UDR kinda day
    Installed a 32t pinion and a set of Dhawk trailing arms
    Of course I took it out back and played

    Just Run IT
    fabricator

  32. #152
    RC Qualifier
    Join Date
    Mar 2016
    Posts
    834
    Ran the UDR on a set of 6s with 32/51 gears at the track today

    Big Smile
    fabricator

  33. #153
    RC Competitor
    Join Date
    Mar 2017
    Posts
    95
    Took it out for a quick run on 4s. Been running it on 6s and just wanted to see how much of a difference there is. Ended up breaking the rear drive shaft. Anyone else had this happen?




  34. #154
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    me and crazyxmaxx at the track.







    i broke the lower a-arm on a very hard cartwheel.


    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  35. #155
    RC Enthusiast
    Join Date
    Apr 2018
    Posts
    20
    Broke a trailing arm and my stock servo (which I already planned replacing with Savox...)
    While on the bench, I'll rebuild all the shocks, and grease all diffs (and recheck what Lucasoil red grease did in the transmission...).

    High maintenance rig but love it. Only ran 2 times !!!!

    After the garage week, it'll owe me some great run time darn.

  36. #156
    RC Competitor
    Join Date
    Apr 2018
    Posts
    84
    Ran it last night with no issues...because I ran it mostly on grass. Still rolled a few times but soft landings so no damage.

    Today I'm attempting to inside paint a new clear interior.

  37. #157
    RC poster
    Join Date
    Apr 2018
    Posts
    7
    how is it on the 32/51?

  38. #158
    RC Champion fourdub's Avatar
    Join Date
    Jan 2016
    Location
    Colton, Inland Empire, Southern California
    Posts
    1,901
    Im working on the video, but you can see the Black UDR (crazy's is a lot faster than mine, the fox one)
    Sla2hvxl,pe4evxl,erevobl
    "Richard Chilson"youtube

  39. #159
    RC Qualifier
    Join Date
    Mar 2016
    Posts
    834
    Just a few mile an hour faster seems
    Spinning searching for traction
    Have now installed the 47t spur
    = Bigger Smile
    fabricator

  40. #160
    RC poster
    Join Date
    Aug 2017
    Posts
    12
    Has anyone purchased the skid plate kit that came out?? I know its a chinese brand ...ebay. I figured id give it a shot , will update when it arrives.
    Also ordered a rear light set up that adds to the realism of the real udr, mounts to the top body bolts.

    Sent from my SM-N950U using Tapatalk

Page 4 of 12 FirstFirst ... 23456 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •