Page 2 of 2 FirstFirst 12
Results 41 to 44 of 44

Thread: TD's UDR

  1. #41
    RC poster
    Join Date
    Jun 2008
    Posts
    3
    I am new to this site. Would like to say that I got lots of good info here and thanks.
    Not new to the hobby. I have had the udr since the beginning,also ate shafts like crazy.
    Cut droop 3/8 in rear with 105mm HR straps, fornt 1/4 all with O-rings under the valves.
    truck is solid now.
    I want to know how the RPM arms are holing up.
    Nice work on the write up
    Last edited by madmaxximus; 11-11-2018 at 11:34 AM.

  2. #42
    RC Racer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    248
    BPee, manual says 1 million... maybe your looking at something different.

    mad, the RPM arms are holding up well but only have 4 packs through them. Also keep in mind i retired this rig from jumping, i am only turning laps now. Always run on sand and its pretty bumpy though.

    Limiting the rear travel seems to have helped a lot, maybe its coincidence but driveshaft doesn't seem to get as hot after a pack.

    My shocks are still holding up since the last rebuild, but o-rings under the pistons to limit travel is a good idea... ill do it next go around.

  3. #43
    RC Enthusiast
    Join Date
    Aug 2017
    Posts
    44
    Well, read yourself:

    https://traxxas.com/sites/default/fi...-OM-EN-R00.pdf

    Page 28, right side, second paragraph.

  4. #44
    RC Racer
    Join Date
    May 2003
    Location
    San Diego, CA
    Posts
    248
    BPee, the manual i have says 1M weight oil, part # 5042.

    The support page links to this version of the manual.

    https://traxxas.com/sites/default/fi...-OM-EN-R02.pdf

    I am guessing the R00 or R02 is what revision it is.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •